7691 offers

maximum number of results exceeded > 1000
please refine your search

Category: 107: sheet metal working
New in: 1998
Price: 22.900 €
Location: Land-de DE 91460 Baudenbach, Frankenfeld 4
Seller: Kran Kral

Hera SML 2500 x 4 folding machine BJ. 1998 CE ID available Kant length 2500 mm x 4 mm thickness mechanical back gauge with selected GeiÃ?fuÃ?schine for C profile. (1000mm, 700mm, 400mm, 200mm, 100mm, 90mm, 80mm, 70mm, 60mm, 50mm) Siemens control system Simatic OP7 Up to 10 consecutive bending steps can be saved. Hydraulic tool clamping. Dimensions 3800mm x 1300mm x 1850mm Weight of machine 4000 KG The folding machine comes from the possession of the authority and very little was used. (Training purpose therefore technically and visually in a very good condition.) The machine was serviced regularly by an authorized workshop and, if necessary, repaired, The machine  ...

Category: 903: machines for soil cultivation, sowing and harvesting
New in: used
Price: 6.500 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Bordcomputer / Monitor; Working width [cm]: 2100

Category: 1800: medical equipment
New in: used
Price: 400 €
Location: Land-de DE 90530 Wendelstein, In der Lach 68
Seller: P&U Medizintechnik

PolyDiagnost Endognost LS500 cold light source, intensity can be adjusted Sales commercial/dealer to our terms and conditions. Errors and spelling mistakes possible, subject to prior sale!

Category: 201: saws
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

Wheel diameter: ca. 800 mm Cutting height: ca. 440 mm cutting width: ca. 770 mm saw band length: max. 5700 mm Table dimensions: ca. 1190 x 880 mm table height: ca. 940 mm Arm length: ca. 770 mm dimensions: ca. 1450 x 880 x 2400 mm machine weight ab.: ca. 750 kg Stable, old version Saw blade guide on top: 5 guide rolls saw blade guide below: 3 guide rolls machine is tested for function. The band saw has been little or not used for the last 15 years and has a few storage traces

Category: 101: boring mills and machining centers
New in: 2013
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Control system: MITSUBISHI M70V Travel distances X: 650 mm Y: 350 mm Number of pallets: 2 Spindle speed: 10-12000 rpm Number of axes: 4 Tool holder: BT40 Max. Table load: 120 kg Tool changer positions: 24 T Machine dimensions: 1800 x 2630 x 2600 mm Machine weight: 5600 kg Accessories: Central spindle cooling Chip conveyor 2 x Dividing Head Automatic door opener

Category: 103: milling machines
New in: 2016
Price: request quote
Location: 89312 Günzburg
Seller: Ralf Schmeißer Werkzeugmaschinen

x-travel: 650 mm y-travel: 510 mm z-travel: 510 mm table surface area: 750 X 510 mm control: HEIDENHAIN TNC 530 I spindle turning speed range: 12000 U/min spindle drive: 11 kW : 20 St. tool adaptor: BT 40 internal coolant system feed: 20 bar feed: 15 m/min rapid traverse: 48 m/min total power requirement: 25 kW weight of the machine ca.: 4.2 t - Control HEIDENHAIN I TNC 530 HSCI Machine complete with: - Control cabinet cooling with air conditioning unit - Flat screen 15 - HEIDENHAIN measuring rulers x, y, z - HEIDENHAIN sealing air - HEIDENHAIN Handwheel HR-410 - 12,000 rpm / ISO 40 with direct drive 10/14 kW - Cooling unit - Internal coolant supply 20 bar (Grundfoss pump) with 2 grinding fi ...

Category: 303: blow moulding machines
New in: 2000
Price: request quote
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

Blow Molder KOSME KSB 4000 for PET bottles 4 000 bph Manufacturer: KOSME Type: KSB 4000 Capacity: 4000 bph in 1.5 ltr Bottle size: 0.1 – 2.0 ltr PET Bottle max dimensions: 110 mm diameter, 340 mm height Year: 2000 Total power: 50 kW heating, 52 kW installed Heating modules: 4 Adjustment areas: 8 Nominal air pressure: 10 bar / 40 bar Dimensions: 4600 x 1700 x 2500 mm Weight: 5500 kg approx. Accessories: Preform bunker, preform erector and chiller included

Category: 102: lathes
New in: 2005
Price: request quote
Location: 89312 Günzburg
Seller: Ralf Schmeißer Werkzeugmaschinen

turning diameter: 240 mm turning length: 300 mm control: SIEMENS 840 greates pass round over bed: 450 mm x-travel: 190 mm z-travel: 635 mm U-axis: 150 mm w-axis: 540 mm spindle bore: 53 mm bar material dia.: 42 mm main spindle speeds:: 50 - 5000 rapid travel - longitudinal/face: 20 / 10 m/min main drive motor: 18,5 kW total power requirement: 48 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Double spindle turning center with C axis for main and counterspindle. Y-axis bar feeder IRCO Profimat DS Type 42.8 Lmax = 3000 mm Workspace: - Circumference diameter max .: 560 mm - Travel X: 205 mm - Travel distance Z: 525 mm - Turning diameter max: 240 mm Main drive version: - Ra ...

Category: 105: saws
New in: used
Price: 480 €
Location: Land-de DE 58730 Fröndenberg/Ruhr, In der Liethe 1
Seller: Fritz Ernst Maschinenhandel e K

Circular saw Manufacturer Kaltenbach Type TL 250 Year unknown Ma. No. 14620 Saw blade 250 mm With limit switch and base Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarantee is excluded. The goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a s ...

Category: 102: lathes
New in: 2014
Price: request quote
Location: Weltweit
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: max. 200 mm turning length: max. ca. 390 mm control: C 200 4D sl (840 D sl) Main spindle:: Max. rpm: 5.000 min/-1 power capacity - main spindel: 20 / 24 kW max. Torque: 135 / 190 Nm spindle diameter in front bearing: 110 mm spindle bore: 85 mm spindle passage: 65 mm usable bar diameter: 65 mm spindle nose: D 140 ISO 702/1 C-Axis: 0,01 ° max. chucking diameter: 175 mm Subspindle:: Max. rpm: 5.000 min/-1 power capacity - Sub spindle: 20 / 24 kW max. Torque: 135 / 190 Nm spindle diameter in front bearing: 110 mm spindle bore: 85 mm spindle passage: 65 mm usable bar diameter: 65 mm spindle nose: D 140 ISO 702/1 C-Axis: 0,01 ° max. chucking diameter: 175 mm Milling Spindle:: ...

Category: 301: injection moulding machines
New in: 2007
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Preform-Injection Molding System with the capacity to also produce heavier preforms (up to 55 g) on 72-cavity-tooling with the biggest injection unit on board available for this platform (extruder screw diam.140 mm. The "package"includes: one resin drying and dehumidifying combo: DryPack, model DP1100/11, with 6,500-l-silo designed and made by EISBAER-Trockentechnik GmbH. The combination needs less power and less space and is easier to set up.

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

x-travel: 1150 mm y-travel: 710 mm z-travel: 710 mm Control: Heidenhain TNC 530 Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 kW tool taper: SK 40 work table:: table surface area: 1.500 x 800 mm max. table load: 1.100 kg Tool-Presetter:: number of toolpositions: 32 pos. tool taper: SK 40 change-time chip to chip: 11,0 sec feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: max. 30.000 mm/min total power requirement: 40 kW weight of the machine ca.: 10,0 t dimensions of the machine ca.: 6,0 x 5,0 x 2,7 m 5-Axis Machine equipped with: - CNC Control Heidenhain TNC 530 - universal Milling Head (B-Axis +30/-130°) - NC- rotary Table dia 800mm (C-Axis) - ATC  ...

Category: 105: saws
New in: used
Price: 349 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A used very stable roller block / rollers Bock for a band saws, cold saws, hacksaw height adjustment by a threaded spindle (left and right) Height 70 cm Min. height 60 cm Roller width 45 cm Base 50 x 65 cm Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 107: sheet metal working
New in: 1983
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 2500 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,40 x 1,00 x 1,50 m - Manual backgauge up to 750 mm - optional manual or automatic bending mode - segments for the upper beam

Category: 1800: medical equipment
New in: used
Price: request quote
Location: Land-de DE Nordrhein-Westfalen
Seller: Christoph Sattler

Zeltiq Coolsculpting system (fat reduction by cold treatment / Cryolipolysis) serial:, Date of purchase: 23.04.2017, floor standing, rollable best. from: 1 breeze base module (BRZ-CG1-BAM-220) 1 breeze base control unit (GT-CG1-CUD-220) 1 Douglas base upper unit (GT-CG1-UMD-000). with following applicators: 1 vacuum applicator (cool advantage plus), (BRZ-AP2-180-000), SN: V1802016315031). 1 vacuum applicator (Coll advantage) (BRZ-AP2-160-000), SN: V1602017010012). 1 breeze applicator (cool smooth Pro), (BRZ-AP1-091-001), SN: V0912015196010). 1 vacuum applicator (cool mini),. (BRZ-AP2-020-000), SN: 0212016284004

Category: 107: sheet metal working
New in: used
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 4060 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: 7,50 kW weight of the machine ca.: 7,00 t dimensions of the machine ca.: 6,00 x 2,20 x 2,70 m - controlled backgauge - div. bending bars lt. Photo - Control MULTIBEND 2000 - engine. Lower beam adjustment

Category: 102: lathes
New in: 1987
Price: 9.800 €
Location: Land-de DE Baden-Württemberg
Seller: Weyhersmüller GmbH & Co.KG

Mazak QT 15 built in 1987 control Mazatrol T 2 Spindle speed up to 3,600 rpm Rotation Ã? 270 mm Turning length 500 mm Spindle bore 51 mm traverse path X/C 155/510 mm Rapid traverse x/Z 10/15 m revolver 8 fold main drive 15 KW machine weight: 4,300 kg Machine dimensions Lxwxh: CA. 2.55 x 1.60 x 1.80 m facilities: -Kitagawa 3 - jaw Chuck: Diameter 200 mm -Operation with double foot switch -Tailstock, Quill stroke 130 mm -Tailstock travel: 460 mm The machine is in good condition and can be seen under power.

Category: 107: sheet metal working
New in: 1977
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 1020 mm plate thickness: 4,00 mm distance between columns: mm : 350 mm : 125 mm : 125 mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m - optional manual, semi-automatic or automatic bending mode possible - Bending angle and lifting height infinitely adjustable via potentiometer - Bending rail ground

Category: 1009: excavators
New in: used
Price: 2.900 €
Location: Land-de DE 88374 Hoßkirch, Hubertushöhe 1
Seller: BECHINGER S.A.R. GmbH

Excavator buckets / rock bucket, very stable, unused The geometry corresponds to a Fang, the tooth holder / cutting edge is rounded, this high performance, grave. Bucket width: 1500 mm Bucket volume: 1 m 3 (piled) base plate for quick coupler: 520 mm (width) x 640 mm (depth) Excavator size: 18-30 to use weight

Category: 107: sheet metal working
New in: 1993
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 3100 mm plate thickness: 5,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,60 t dimensions of the machine ca.: m - controlled back gauge up to 1000 mm - hydraulic shear angle adjustment - Cutting gap adjustment - Cutting length limit - Side stop with folding cams - Operation manual - Sharpened knife

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-de DE Offenburg
Seller: Andreas Zobel Werkzeugmaschinen

Clamping fixture main and sub spindle double foot switch with protection cover for main and sub spindle tool holder CAPTO C5 for Rotary Milling spindle chain tool magazine with 40 spots increase the possible Indexing B-axis to 0,0001° I/F for high pressure coolant system 70 bar compressed air exhaust system for Chuck (HS) and tool cutting (turning-milling spindle) chip conveyor part catcher part conveyor belt AGW revolver 2 bar loader interface tapping without Compensating Chuck transformer Knoll high pressure system

Category: 107: sheet metal working
New in: 1990
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 1500 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,00 x 0,80 x 1,40 m Pointed rail up to 160 ° bending radius

Category: 101: boring mills and machining centers
New in: 2009
Price: request quote
Location: Land-de DE Offenburg
Seller: Andreas Zobel Werkzeugmaschinen

spindle unit with Tool holder BT40 Tool magazine with 61 spots Workpiece measurement Renishaw taster direct measuring system in the X -, Y - and Z-axis chip conveyor I/F for coolant system and Knoll load monitoring function Knoll high-pressure system documentation (if applicable)

Category: 105: saws
New in: 2012
Price: request quote
Location: Günzburg
Seller: Bästlein Gebrauchtmaschinenhandel GmbH

saw blade diameter: 350 mm rectangle: bei 90°: 170x100 mm rectangle: bei 45°: 95x100 mm rectangle: bei 30°: 65x100 mm weight of the machine ca.: 340 kg

Category: 301: injection moulding machines
New in: 1998
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ANGEL'S 80/30 HL Year of construction: 1998 Injection unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 1150 bar Metering capacity: 49 cc Clamping unit: Clamping force: 30 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 550 x 380 mm Ejector: hydraulic Clamping unit: hydraulic Control: EC 100 Additional equipment: EUROMAP Robot interface Hot channel control Magnetic plate for additional payment Dimensions: Weight: 3200 kg Length/width/height: 3.26 x 1.2 x 1.8 m Drive: Pump/motor: 7.5 kW Heating capacity: 5.9 kW Cylinder heating: 13.4 kW Price: On request

Category: 105: saws
New in: 2000
Price: request quote
Location: Günzburg
Seller: Bästlein Gebrauchtmaschinenhandel GmbH

saw blade diameter: 450 mm cutting speed: 11/22 13/26 15/30 m/min feed: 0-1000 mm/min. : 1600 mm/min. working area: 150 mm square material: 140 mm flat material: 330x40 mm round material: 150 mm

Category: 301: injection moulding machines
New in: 1991
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ANGEL'S 200/40 Year of construction: 1991 Injection unit: Screw diameter: 30 mm Shot weight: 88 g Injection pressure: 1450 bar Dispensing volume: 99 cc Clamping unit: Clamping force: 40 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 550 x 430 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 90 Additional equipment: Dimensions: Weight: 3000 kg Length/width/height: 3.51 x 1.22 x 1. 90m Drive: Pump/motor: 15 kW Heating capacity: 6.9 kW Total capacity: 21.9 kW Price: On request

Category: 105: saws
New in: 2010
Price: request quote
Location: Günzburg
Seller: Bästlein Gebrauchtmaschinenhandel GmbH

saw blade diameter: 370x32x3 mm speed: 15-150 U/min : 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm capacity 60 degrees: round: 115 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90x90 mm weight of the machine ca.: 615 kg

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel's 200/45 HL-V victory / production line: the machine is integrated with the robots and conveyor belt brand Angel Year of construction: 2002 Injection unit: Screw diameter: 30 mm Injection pressure: 2210 bar Dispensing volume: 99 cc Clamping unit: Clamping force: 45 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 550 x 330 mm Ejector: hydraulic Clamping unit: hydraulic Control: EC 100 Additional equipment: Tie machine EUROMAP Robot interface Air valve x 1 Hydraulic core pulling x 1 Robot Angels ER-HLI Production line: The machine is integrated with the robots and conveyor belt brand Angel Dimensions: Weight: 3300 kg Length/width/height: 3.30 x  ...

Category: 107: sheet metal working
New in: 1976
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 2550 mm plate thickness: 8,0 mm back stop - adjustable: 1.000 mm cutting angle: 2 ° no. of strokes: 42 Hub/min down holder: 17 Stück column arm: 80 mm oil volume: 150 l total power requirement: 11,0 KW weight of the machine ca.: ca. 6.000 kg range L-W-H: 3.400 x 1.600 x 1.100 mm

Category: 301: injection moulding machines
New in: 1996
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ANGEL'S 200/50 HL Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection pressure: 2000 bar Dispensing volume: 69 cc Clamping unit: Clamping force: 50 t Tie bar distance: 0 x 0 mm Clamping plate sizes: 660 x 560 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Control with hot channels x 8 Air valve x 1 Dimensions: Weight: 4700 kg Length/width/height: 4.04 x 1.29 x 1.96 m Drive: Pump/motor: 15 kW Heating capacity: 6.8 kW Total capacity: 21.8 kW Price: On request

Category: 107: sheet metal working
New in: 1995
Price: request quote
Location: Abgeber
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 4020 mm plate thickness: 4,0 mm distance between columns: 4200 mm upper clamping bar adjustment: 400 mm adjustment of lower beam: 80 mm engine output: 8,0 kW weight of the machine ca.: 10,9 t range L-W-H: 5.720 x 1.776 x 1.740 mm ohne HA

Category: 301: injection moulding machines
New in: 1995
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel's 330/70 HL / tie machine Year of construction: 1995 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 1600 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 70 t Tie bar distance: Tie machine Clamping plate sizes: 660 x 560 mm Ejector: hydraulic Clamping unit: hydraulic Control: EC 100 Additional equipment: Tie machine EUROMAP Robot interface Control hot-channel x 12 Control air valve Dimensions: Weight: 5300 kg Length/width/height: 6.00 x 1.85 x 2.00 m Drive: Pump/motor: 15 kW Heating capacity: 9.2 kW Cylinder heating: 24.2 kW Price: On request

Category: 107: sheet metal working
New in: 2001
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

sheet width: 3240 mm plate thickness: 2,5 mm daylight opening: 350 mm adjustment: 80 mm total power requirement: 8,5 kW

Category: 301: injection moulding machines
New in: 2011
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel e-max 310/100 / electric motor / in perfect technical condition Year of construction: 2011 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2000 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 460 x 410 mm Clamping plate sizes: 650 x 600 mm Ejector: electric Clamping unit: knee lever Control: CC 300 - touch screen Additional equipment: Machine in perfect condition, as new Year of construction: 12.2011, the machine was purchased but in 2012 Machine is completely electric, works very quiet, power-saving High speed machine Steueurng with core pulling Control with Heiskanälen Air valve x 1 Paralle ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 87 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 4 kg Dimensions (l x w x h) approx.: 200 x 300 x 200 mm Description: Composed of 2 pieces: base size 30 x 45 mm, see photos

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel victory 330/110 tech with robots Engel ER HLI 41VC / production line Year of construction: 2002 Injection unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dispensing volume: 201 cc Clamping unit: Clamping force: 110 t Tie bar distance: 0 x 0 mm Size of the clamping plates: 790 x 680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Tie machine Production line: The machine is integrated robot guard with the robots and conveyor belt brand Angel, Air valve x 1 Hydraulic core pulling x 1 Injection unit cured - bi Robot Angels ER HLI 41VC Dimensions: Weight: 7300 kg Length/width/height: 5.1 x 1.5 ...

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 147 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 15 kg Dimensions (l x w x h) approx.: 1000 x 800 x 1000 mm Description: 3 outputs 380 V - 3 outputs 220 V

Category: 301: injection moulding machines
New in: 2005
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel victory 330/120 tech with robots Engel ER HLI 41 VCEP5 / production line Year of construction: 2005 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2175 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 tons Tie bar distance: 0 x 0 mm Clamping plate sizes: 740 x 680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Tie machine Production line: The machine is integrated robot guard with the robots and conveyor belt brand Angel, Air valve x 2 Hydraulic core pulling x 1 Injection unit cured - bi Proportional valve on the injection unit - precise injection Robot Angels ER HLI 41 VCEP5  ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 87 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 4 kg Dimensions (l x w x h) approx.: 200 x 300 x 200 mm Description: Composed of 2 pieces: base size 30 x 45 mm, see photos

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 90 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 300 x 300 x 400 mm Description: Lot composed of 3 comparators with comparator holder. 2 with magnetic base. See photo

Category: 303: blow moulding machines
New in: 2002
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 87 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 2 kg Dimensions (l x w x h) approx.: 300 x 200 x 100 mm Description: Cone pliers holder, ISO40. With plierS size between 4 and 16 mm.

Category: 502: presses
New in: 1997
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Presona LP 40 OH2, constructed 1997, motor 30 kW Technical specifications Manufacturer Presona Sweden Type LP 40 OH2 Year of construction 1997 Feed opening 1000 x 690 mm (LxW) Drive power 30 kW Press power 40 t Tying system 4-fold, horizontal Max. volume capacity 250 m³/h Press capacity at bulk weight of 25-30 kg/cbm Approx. 6-7,5 t/h bulk weight of 30-40 kg/cbm Approx. 7,5-10 t/ Press chamber volume 0,77 cbm Bale size 750 x 850 mm (WxH), length varible Oil tank volume 600 litres Transport dimensions 6650 x 1800 x 2650 mm (LxWxH) Machine weight Approx. 8900 kg

Category: 101: boring mills and machining centers
New in: 2002
Price: used machinery auction RESALE 15.900 €
Location: Land-ro RO Romania, 117156 Budeasa Mare, Arges
Seller: Surplex GmbH

Weight approx.: 13500 kg x-travel: 1000 mm y-travel: 500 mm z-travel: 600 mm control: CNC FANUC 21 iM Dimensions (l x w x h) approx.: 9000 x 2550 x 2900 mm toolchanger positions: 30 taper: ISO 40 turning speed range: 10000 rpm rapid traverse: 30 m/1` m/min table surface area l x w : 900 x 450 mm total power requirement: 22 kW Description: RMT KOMPAKT KP.10 P Vertical Machining Center - control unit: CNC FANUC 21 i - M - serial number: KP 1010 - manufacturing year: 2002 - X-axis: 1000 mm - Y-axis: 500 mm - Z-axis: 600 mm - maximum distance between spindle and worktable: 700 mm - surface of the worktable: 900 mm x 450 mm - cooling system: SACEMI TYPE IMM80B- P530 - optical messuring system: ...

Category: 502: presses
New in: 2010
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Presto, type HPK 50 BSK, year of construction 2010, drive power 22 kW, only 7270 operating hours Technical specifications Manufacturer Presto Type HPK 50 BSK Year of construction 2010 Press power 50 t Specific press capacity 65 N/cm² Drive power 22 kW Power input 80 A Hours of operation 7270 Channel cross section 1100 x 700 mm Feed channel dimensions 1050 x 1250 mm Filling volume 0,96 m³ Throughput capacity on idle speed 157 m³/h Cycle time 22 sec. Average throughput rates: Density of 35 kg/m³ 4,4 t/h Density of 60 kg/m³ 6,3 t/h Density of 100 kg/m³ 9,9 t/h Bale weight up to 500 kg, depending on material Tying system 4-fold, fully automated Machine dimensions with ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 87 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 4 kg Dimensions (l x w x h) approx.: 200 x 300 x 200 mm Description: Composed of 2 pieces: base size 30 x 45 mm, see photos

Category: 201: saws
New in: 1989
Price: 3.500 €
Location: Land-de DE 58730 Fröndenberg/Ruhr, In der Liethe 1
Seller: Fritz Ernst Maschinenhandel e K

Used saws Internal number: m2658 Manufacturer Altendorf Type F 45 Machine number 77-1-89 Year of construction 1989 Speed 2,870 RPM. Carriage length 3,20 m Blade swivel up to 45 ° Weight 900 kg Engine is reason been overtaken. With test sheet Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarante ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 87 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 2 kg Dimensions (l x w x h) approx.: 300 x 200 x 100 mm Description: Cone pliers holder, ISO40. With plierS size between 4 and 16 mm.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)