126,618 used machines on RESALE, but how to find them? Machine Search
Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted
Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified
V6 30 degree T mold set; length approx. 3.1 meters
I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons
Machine number: 2561290 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 8 - 80 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm
Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm
Stroke: 12 mm Compressive force: 28 kN Delay time: 0.063 s min./max. operating pressure: 3/6 bar Table dimensions: approx. 200 x 160 mm
Key data: 10 t, 300 mm, 300 mm
more info on request
Machine number: 2-0538 Compressive force: 28 kN Stroke: 12 Table dimensions: approx. 200 x 160 mm incl. installed punching tool
Machine number: 473678 Delay time: 69 ms Safety distance for hand control tool: 110 mm Table dimensions: 700 x 525 mm
RODCRAFT WP100P workshop press ; hydraulic pneumatic and manual with 2 speeds ; suitable for pressing, straightening and assembly work ; Capacity: 100 tons; Air pressure: 7.5 – 8.5 bar ; Cylinder stroke: 300 mm ; Inner frame width: 787 mm ; Drevelset: yes ; Weight approx. 800 kg; Aged model
Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on ...
New Part number: 526 070 12 01 EX52607300010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
Key data: 100 t, 3440 mm, 3550 mm
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renewe ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extr ...
Key data: 44 t, 1300 mm, 1250 mm
Electric Press Brake C12 CoastOne - Made in Finland Pressing force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 4-axis controlled X-R axes Press brake tool holder: Quick clamping system TEDA top AMADA / Promecam / Type A / Type R1 Light in the front work area Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Machine number: 35-173-98 Serial number: 2-0499 Compressive force: 4.5 kN Stroke: 60 mm incl. transport trolley
Serial number: 055-007/12 Operating voltage: 220 V Frequency: 50 Hz Nominal current: 45 A Connection: 12.5 kW Control voltage: 60 W Press force: 25 Mp Operating pressure: 160 kp/cm³ Speed: 200 mm/s Sales: 450 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between ram and table: 800 mm Table dimensions: 640 x 500 mm
Key data: 250 t, 3200 mm, 3200 mm
Electric Press Brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Back gauge: X-R-Z1-Z2 controlled Control: TC15-2D Graphics Control Front support arms, height-adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Other equipment options on request Warranty: 36 months after installation
max. bar: 400 Serial number: 2121 Press force: 150 t Table dimensions: approx. 1500 x 560 mm Max. stroke: approx. 250 mm
Key data: 22 t, 900 mm, 850 mm
Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Cabinet 1020x570x1000 Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.
automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t
maximum number of results exceeded
please refine your search
