off used for sale

TECHNICAL DATA: Working length: min. 200 mm – max. 1500 mm Working width: min. 30 mm – max. 110 mm Working thickness: min. 10 mm – max. 60 mm Saw blade: max. Ø 400 mm Sawing unit: 6 kW (2 x 3 kW) Installed power: 11 kW INCLUDED IN DELIVERY: 01 Waste conveyor belt

Block of 4 storage offices, room-in-room system, double-storey, incl. stairs, approx. 139m2 – used - : Price from location: 19.950.-€ (net), dismantled, packed and loaded! Pos.11: Manufacturer: Kleusberg Type: System room Trendline Year of manufacture: unknown, probably 2014 Roof walkable with a man's load max. 100kg Element width: approx. 1.03m Length incl. stairs: total approx. 14.51m Width "gap" for the stairs: approx. 1.27m Block right, top and bottom: Length: approx. 4.60m (4 elements and one narrow) Block left, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Height ground floor: approx. 2.70m Total height approx. 5.40m 4x doors All offices are closed on 3 sides and thus stand with one side against the hall wall Incl. lighting etc. if available Ground floor without floor, upper floor with floor Sale without  ...

Key data: 500 mm, 180 mm

Under-table cross-cut saw Cutting width approx. 500 mm Cutting height approx. 120 mm Cross-cut movement from below, continuous from front to back Capping is triggered by foot switch Motor approx. 3 kW Saw blade diameter 500 mm, saw blade HM-tipped Suction connection on the saw body at the back bottom Diam. 100 mm on each side roller conveyor 3000 mm long, roller length 500 mm, Roll diameter 80 mm, roll spacing from center to center 205 mm One roller conveyor with 2 sliding length stops External dimensions: L 6800 mm x W 950 mm x H 1300 mm

Code: 0463 Brand: OTMA - ITALY Model: TI/35 - CE Standard Professional crosscutting machine for wood, aluminium, Pvc, plastics etc. - CE Standard Technical data Blade diameter mm 350 Hole 30 Three-phase motor power Hp 3 Swivelling table +/- 45 degrees Cutting height mm 120 Suction mouth diameter mm 70 Lateral reference mark Overall dimensions mm 700 x 600 x 600 h Weight kg 40

Storage offices, room-in-room system, 2 floors with stairs, 2 large and one small room - used - : Price ex location: 19.500.-€ (net), dismantled, packed and loaded! Pos1: Manufacturer: Kleusberg Type: System room Trendline Year of manufacture: unknown, probably 2014 Height: just under 6m Roof walkable with a man's load max. 100kg Element width: approx. 1.03m Length: approx. 21.40m, "gap" for passage is approx. 4.40m long Depth: approx. 4.24m Height ground floor: approx. 2.86m All offices are closed on 3 sides and thus stand with one side against the hall wall Bottomless Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - Pos. 1: Legend 500 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controlle ...

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw -------------------------------------------------- ----------- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z ...

Reference Num.: 4466 Brand: Heidelberg Type: SM 52-2 Construction year: 1998 Impressions: 63 mio Size: 370 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 145 mm, max 370 x 520 mm Printing speed: max 15,000 sheets/hour Printing units: 2 Paper thickness: 21.06 mm Machine size: Length: 2,860 mm, Width: 1,850 mm, Height: 1,620 mm Total weight: kg 4,600 / lbs 10,141 Equipment: - CPTronic - Autoplate - Alcolor - Nummerier- und Eindruckeinrichtung

Reference Num.: 4468 Brand: Heidelberg Type: GTOZP 52+NP Construction year: 1992 Impressions: 65 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 2,190 mm, Width: 1,450 mm, Height: 1,550 mm Total weight: kg 2,850 / lbs 6,283 Equipment: - Wendung 2:0 / 1:1 - VARN Kompac Feuchtwerk - Nummerier- & Perforiereinrichtung

Functional platesetter, year of manufacture approx. 2000, little used, good condition, only for collection. Base cabinet for plates/films can be provided.

turning diameter: 1.300 mm turning length: 3.000 mm control: FAGOR 8055 TC/C swing diameter over slide transversal: 940 mm feeds: X /Z 8.000 mm/min c-axis: Inkl. speeds:: 0 - 800 u/min transmission ratio: 4 spindle nose: DIN-55026-B11 : 46 kw spindle passage: 104 mm max. workpiece weight between centres: 13.000 kg chip conveyor: Inkl. total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7.925 x 2980 x 2585 m Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tool power 5.5 kW Tailstock Tailstock quill diameter 180 mm Tailstock quill stroke 300 mm Additional equipment 3-jaw universal chuck Ø 900 mm 3-point steady rest Ø 750 mm 3-point steady rest Ø 400 mm 2 axial driven tool holders 1 radial driven tool holder 20 VDI 50 tool holders Air-conditioning unit for electrical cabinet Portable handwheel High-pressure coolant  ...

turning diameter: 420 mm turning length: 3.123 mm control: MORI SEIKI MSX-850III turning dia. over bed: 995 mm swing diameter over slide transversal: 825 mm dist. between centers: 3.200 mm x-travel: 280 mm z-travel: 3.170 mm feeds: X.Z 30.000 mm/min spindle nose: JIS A2-8 turning speeds: 3.000 U/min spindle passage: 105 mm forward bearing diameter: 160 mm spindle drive: 28 kW Torque: 3.365 Nm turret head: pos. 12 tail stock: weg tailstock quill diameter: 150 mm quill stroke: 150 mm tailstock taper MT: MK 5 total power requirement: 54 kVA weight of the machine ca.: 13,5 t dimensions of the machine ca.: 8.147 x 2.58 x 2.390 mm Equipment - Hydraulic 3-jaw chuck Ø 400 mm - Chuck type SCHUNK THW 400-120 - Quick jaw change system for chuck - Hydraulic steady rest SHW type SLU-3.2-ZS - Steady rest capacity 50–200 mm - CNC longitudinal movement of steady rest (A-axis) - Automatic tool me ...

turning diameter: 255 mm turning length: 500 mm control: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kW rapid traverse Z-axis: 20 m/min rapid motion - y-axis: 12 m/min rapid traverse X-axis: 16 m/min rapid traverse X-axis: 16 m/min spindle nose: A2-8/A2-6 bar material dia.: 66 mm centre distance: 639 mm Chip coveyor: swing dia.: 270 mm total power requirement: 65 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m -Two 12-station turrets (24 positions total), each with 12 driven tool stations -Y-axes on both turrets -Sub-spindle travel: 635 mm -Sub-spindle rapid traverse: 30 m/min -Travel – X (Turrets 1 & 2): 190 mm -Travel – Y (Turrets 1 & 2): ±40 mm -Travel – Z (Turrets 1 & 2): 500 mm -Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm -Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001° -Turret 1 s ...

Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...

Omga Radial 600P3S Manufacturer: OMGA Type: Radial 600P3S M.Nr: 163864 Max. saw height: 90mm Max. saw length: 505mm Saw diameter: ø300mm Saw spindle: Ø 30mm Motor: 3 kW Speed: 3000 tpm Dust extraction: 80mm Weight: 190 kG Condition: functional

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222415 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222420 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

Manufacturer: Harwi Type: 625-U Year: 1998 Swivelling: 0-45° Tilting: 0-45° Cutting heigth: 135mm Cutting length: 625mm High adjustment: 50mm Saw: Ø 400mm Saw arbor: Ø 30mm Motor: 3 kW Toerental: 2800 tpm Dust extraction: 2x 100mm

Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive

DeWalt 1600S Manufacturer: Dewalt Type: 1600S M. Nr: nn Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 1994 Thickness: 125mm Stroke/sawlength: 450mm arial: 90mm Saw blade-outside diameter: ø400mm Saw blade-inner diameter: ø30mm Motor: 3 kW RPM: 2800 tpm Dust extraction: 2x 100mm

DeWalt 1600 Manufacturer: Dewalt Type: 1600 Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 199. Cutting height: 125mm Stroke: 450mm Saw eleavation: 90mm Saw diameter: ø400mm Arbor: ø30mm Motor: 3 kW RPM: 2800 rpm Dust extraction: 2x 100mm

Graule Model ZS 135/N (tilting and swivelling) Motor: 2 or 3 KW 400 Volts Cutting height: 135 mm – 90°, 92 mm – 45°tilted Stroke: 460 mm – 90° and 320 mm – 45° Saw: 350 mm Swivelling: 45° – 90° – 25° Titling: 45° – 90°

OMGA T55 300: 3 pcs. for sale Manufacturer: OMGA Type: T55 300 Year: 1990-10 M. Nr.: 199899 Max. saw height: 75mm Max. saw length: 135mm Saw diameter: ø300mm Diameter zaagblad as: ø30mm Motor: 1,2 kW Speed: 3000 tpm Dust extraction: 80 Condition: Functionel tested

DeWalt 722KN -XS Manufacturer: DeWalt Type: 722KN-XS M.Nr: 00180 Cutting height: 90mm Stroke: 510mm Saw diameter: ø300mm Arbor: Ø 30mm Motor: 3 KW RPM: 2650 rpm Dust extraction: 2x 100mm Weight: 115 kG

4 Color Sheet-Fed Offset Press Ryobi 3304H 4 Farben Offsetdruckmaschine / 4 Color Sheet-Fed Offset Press Ryobi 3304H Baujahr / Year 1999 - Serial-No. 1532 Size max. Size 340 x 460mm Feuchtwerk / Dampening System VARN Compac Bedienpult / Console for ink and register PCS-F Automatische Wascheinrichtung / Automatic washer for roller and blanket Verchromte Cylidner / Chromed cylinders Puderapparatt / Power spray Kompresor / Compressor Guter Zustand / Good condition.

2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included

2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg GTOZP-52+ N+P 2 Color Offset Press Heidelberg GTOZP-52+ N+P Year 1992 - Serial-No. 707612N Size max. 360 x 520mm Impressions 53 Mio. Dampening System Alcolor with Baldwin Plus Version - Imprint Unit Numbering & Perforation Wendung 2/0 - 1/1 / Perfecting 2/0 - 1/1 Manuals Included

2 Color Offset Press Heidelberg SM 52-2P+ Plus version with Perfecting 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg SM 52-2P+ Baujahr / Year 1997 - Serial-No. 201301 Druckzahl / Impressions 54 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm  Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Perfecting 1/1 - 2/0 CP-Tronic, Autoplate, Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included 

1 Color Press Heidelberg GTO46+ N+P in good Condition.   1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1989 - Serial-No. 698328 Size max. 140 x 180 / 320 x 460 mms Dampening System VARN Compac Plus Version with Numbering and Perforation unit N+P Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr

2 Color Offset Press Heidelberg MOZP-S with CP Tronic and Stream Feeder 2 Farben Offsetdruckmaschine / 2 Color Offset Press Heidelberg MOZP-S Year 1990 - Serial-No. 610975 Size min. 280 x 280mm - max. 480 x 650mm Impressions 66 Mio. Dampening System AQUATRON CP Tronic Perfecting 1/1 - 2/0 Speed max. 8.000sh/h

5 Color Offset Press Ryobi 925 P with PCS-G Control Desk and PDS-E color Control. 5 Color Offset Press Ryobi 925P Year 2011 – Serial-No. 1348 Size min. 410 x290mm – max. 640 x 920mm Impressions 79 Mio. PCS-G Control Desk PDS-E color control Ryobimatic Continuous Dampening System Automatic Ink-roller washing device Automatic Blanket washing device Grafix Powder Sprayer Perfecting 1/4 - 5/0

Reference Num.: 4470 Brand: Sakurai Type: Oliver 466 SDP Construction year: 2014 Impressions: 34 mio Available: directly Status: In production Location: Deutschland Printing units: 4 Equipment: - CIP 3-Anbindung mit x-rite Densitomer - SCC II-Farbkontrollleitstand - automatische Farbwalzenwasch-Einrichtung - SPC Sakurai Plate Changing - SAS autom. Formateinstellung - SIS (Sakurai Interaktive System) - Hochstapel Ausleger

AGICOM Recycling Machine Trade The powerful and robust MAXI 100 cable peeling machine is ideal for processing cables with a diameter of 6 to a maximum of 90 mm. How do you peel cables? The two-knife system cuts open the cable insulation, and the copper or aluminum core can be easily removed. The cable peeling machine can be infinitely adjusted to all cable diameters via a hand crank. The cutting depth of the blades (cable sheath) is also adjustable and thus enables the processing of a wide variety of cable types (e.g. triangular wires made of high-voltage cables, cables with lead sheath ...) All-round intrusion protection CE Declaration of Conformity Manual in German Spare parts available! Cable diameter: 6 to 90 mm Number of blades: 2 Cutting speed: approx. 22 m/min Drive: 2 electric motors, 2 x 1.1 kW / 380V 50 Hz Dimensions: L 1850 x W 760 x H 1200 mm Weight: ...

1 Farben Offsetdruckmaschine mit VARN Compac Feuchtwerk / 1 Color Sheet-Fed Offset Press with Dampening System VARN Compac 1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO52+ Year 1986 - Serial-No. 685682 Size max. 320 x 460mm Impressions 70 Mio.  Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version Mit Zubehör und Handbüchern / With accessories and Manuals

fffffffffff

1 Color Sheet-Fed Offset Press with VARN Compac Dampening System 1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1978 - Serial-No. 664275 Size max. 320 x 460mm Impressions 70 Mio.  Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version Mit Zubehör und Handbüchern / With accessories and manuals

AGICOM Recycling Machine Trade

Reference Num.: 4379 Brand: Ryobi Type: 512H Construction year: 1998 Impressions: 43000000 mio Size: 520 x 365 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 365 mm Printing speed: max 11,000 sheets/hour Printing units: 2 Paper thickness: 18.11 mm Machine size: Length: 2,215 mm, Width: 1,561 mm, Height: 1,598 mm Total weight: kg 2,200 / lbs 4,850

AGICOM Recycling Machine Trade The Junior 25 cable peeler is a compact tabletop device. The machine is ideally suited for extracting copper from the thinnest electrical cables (with rubber or PVC jacket). Peeling range: 2 to 28 mm Cutting speed: approx. 25m/min. Power consumption: 220V/440Watt Dimensions: 450x500x500 mm Easy adjustment and operation, Cutting Unit: Two-Knife System Weight approx. 50 kg; Year of construction 2020

Reference Num.: 4424 Brand: Ryobi Type: 522HXX Construction year: 1999 Size: 520 x 375 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 375 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 16.93 mm Machine size: Length: 2,700 mm, Width: 2,225 mm, Height: 1,705 mm Total weight: kg 3,400 / lbs 7,496 Power: KW 18 / hp 18

Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines

control: FAGOR 8055 TC workpiece weight: 10.000 kg handwheel: inkl. Chip coveyor: inkl. centre height: 500 mm greates pass round over bed: 1300 mm Swing diameter face slide: 1000 mm centre distance: 5000 mm travel of cross-slide: 680 mm rapid traverse x + z axis: 8 m/min bed width: 900 mm spindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpm spindle bore: 104 mm spindle diameter in front bearing: 180 mm turning speed range:: Anzahl 4 main drive: 37 kW Torque: 10.000 Nm : Sauter 300 x 300 diameter of quill: 180 mm quill stroke: 300 mm Height: BIS ZUR FLACHFÜHRUNG 805 mm total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m Equipment -4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was ...

Reference Num.: 4478 Brand: Heidelberg Type: GTOVP 52 Construction year: 1988 Impressions: 70 mio Size: 360 x 520 mm Available: directly Status: In production Location: Spanien Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 4 Machine size: Length: 3,860 mm, Width: 1,470 mm, Height: 1,550 mm Total weight: kg 4,940 / lbs 10,891 Power: KW 8 / hp 8 Equipment: - Wendung 4:0 / 2:2 - Alcolor - CPC - Baldwin Kühlsystem

4x2 vehicle, 200 cc displacement, never used The color and finish of the vehicle body may vary according to availability   VEHICLE ONLY FOR OFF-ROAD USE, NOT PLATED, WITHOUT REGISTRATION DOCUMENT and NOT REGISTERED (no VIN number) Overall dimensions: 2500 x 1300 x 1600 mm Weight: 500 kg Auction-ID: A7-50796-125

USED SINICO TR60/4 CUT-OFF MACHINE Equipped with 1 Bar feeder bar of 6 meters Dimensions and weight Machine: 5100x2350xH2400 - Tray: 1300x700 - Cabinet: 4000x700xH1800mm - Conveyor: 4200x1650xH1700mm - Bar feeder: 6900x1220xH1900mm - Weight: 10200kg Auction-ID: A1-50950-70

Auction-ID: A1-50846-312