off used for sale

Complete Log Cut-off Saw Manufactured by Raute

Prodicon Batch Off Unit 500mm sheet width Inlet speed 0-10m/minute Sheet thickness 5-12mm No. of cooling sections 3 No. of fans 9 Complete with electrical control panel. Year 2009

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

BOTTLES & JARS!

New glass Depalletizer SASIB SIMONAZZI Manufacturer: SIMONAZZI Year of construction: 1996 Model: SWEEP OFF B Type: IBB 109 Performance: 30 000 bottles / h Range data EURO: 1200 x 800, industry: 1200 x 1000 Dimensions of the machine: 12m x 8m (max height: 3. 8 m) New glass Depalletizer with conveyor and pallet magazine.

Complete line for production of twist off caps.

Electro-hydraulic Space requirement mm: 3000x1500 Lifting height max mm: 2000

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

Printing Width: 1050 mm // Web Width: 1120 mm

Process air cooler/chiller/chiller, air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 1002 P3-20-OFF – 200 kW TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...

Process air cooler/chiller/chiller, air-cooled, Type: TAEevo Tech 1002 P3-20-OFF – 200 kW Manufacturer: MTA S.p.A. TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...

Gearbox, spur gear, angle gear, worm gear -Manufacturer: Officina Meccanica, gearbox type MRV 20 FF -Translation: i= 10 -Hollow shaft: Ø 24 x 100 mm / Ø 19 x 50 mm -Dimensions: 165/175/H210mm -Weight: 5.9 kg

solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Offenwanger, solenoid valve unused OVP -Type: VEZ 000 -Number: 2x valve available -Price: per piece -Dimensions box: 60/40/H40 mm -Weight: 0.1 kg/piece

Out-of-the-box recovery connections can be created with the HPE 1950 Switch Series using the Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards. Key connections are distributed across multiple units in a logical stack for greater resiliency. Sold as a complete package with the following components: 1x HPE Office Connect 1950 JG961A 24-Port (PoE) 2x HPE Office Connect 1950 JG962A 48 port (no PoE) 13x HPE Office Connect 1950 JG963A 48-port (PoE) 10x HP A-RPS1600 JG136A Power Supply

1 of used capper for sports-caps, make Officine Ave, type TAR 8T Pick&Place, new 1997, operates from left to right. Used for 500 ml PET bottles.

Open Spray Stand 2x2,1x2,2 The overspray during powdering is absorbed by the extraction unit. The powder spray stand is delivered on rollers and is therefore mobile. - The extraction system is equipped with a 60 L powder container (rollable). - As a 1st stage, there are 4 filters in the extractor. - Above the cab is the absolute filter. 1. Dimensions of the powder stand width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m³/h Electric motor 3.0 kW 3. Filter Φ 325x600 4 pcs Type Filter Cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type bag filter

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Hardly used blind eyelet hole and setting machine

A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible.

Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible.

Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.

TECO Office 600 All FUll time surge protection

A continuous glass capping machine VTB with gas flushing for twist-off lids is available. Glass volume: 225ml/380ml, capping capacity: 10-60lids/min, product material: stainless steel 1.4301, machine dimensions X/Y/Z: approx. 3000mm/1000mm/2300mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Expected to be available August 2026.

available from July/August 2026, in operation for 225 and 380 ml jars with TO 58 and 66, The machine is currently operating with nitrogen blanketing (no steam), which drives the oxygen out of the headspace., For sale is a VTB Glass seal machine (Model VM 105 Twist Off) in good, used, and fully functional condition., The machine is currently still in operation and can be inspected at any time by arrangement. It is ideal for the Food industry (e.g., canned foods, sauces, jams) and convinces with its robust stainless steel construction as well as reliable sealing technology., Inline sealing machine for twist-off closures, Integrated Lid sorting for 58 and 66 closures, Gas purging system (optional, usable) for longer shelf life, Pressure rollers for reliable sealing, Transport belt with adjustable side guides, Height adjustment for different glass formats, Operator panel rotatable and swivel ...

PLC controller, central processing unit, working memory, CPU, central processing unit, central device, Simotion, motion controller, Simovert Masterdrives motion control, Profibus CBP2, Comm board, communication module -Manufacturer: Siemens, Simovert Masterdrives Motion Control -Type: 6SE7090-0XX84-OFF5 -Dimensions: 140/115/H25 mm -Weight: 0.1 kg

Solenoid Valve, Disc Valve, Flap Valve, Electric Solenoid Valve, Solenoid Valve, Solenoid Gas Valve, Gas Solenoid Valve -Manufacturer: Offenwanger, solenoid valve unused in original packaging -Type: VEB 212 -Valve: VEZ 000 voltage 24V -Valve body: GEB 010 -Quantity: 18x valve available -Price per piece -Dimensions of box: 125/105/H40 mm -Weight: 0.3kg/piece

Power cutter>br>grinding wheel 250mm>br>speed 2880rpm>br>motor 1.1KW>br>with various grinding wheels>br>with vice>br>and dial gauge stop>br>coolant system>br>connection voltage 380Volt>br>see pictures >br>condition: untested (6)

Power cutter>br>grinding wheel 250mm>br>speed 2880rpm>br>motor 1.1KW>br>with various grinding wheels>br>with vice>br>and dial gauge stop>br>coolant system>br>connection voltage 380Volt>br>see pictures >br>condition: untested (6) Auction-ID: A7-44817-199

Format: 740 x 1040 mm<br><br><br><br>br>Verf Gbar: Short-term

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4-color format: 212 x 360 mm<br><br><br>Still in operation: Yes<br>

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

20pcs new rollers for HEIDELBERG SPEEDMASTER SM102

Large items of office furniture includes: -Tables and cabinets made of wood -Tables and cabinets made of steel/plastic In very good condition!