off used for sale

Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request

with feeding Filling - Portioning - Turning Off MC Control Price on request

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5  ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Rapid mixer,stainless steel,with timer and safety cut off.

Rapid mixer,stainless steel,with timer and safety cut off.

Rapid mixer,stainless steel,with timer and safety cut off.

Cargo Tricycle Electric Tipper New vehicle available from stock Description E-Mobile, TUC TUC, Electric Tipper Load Carrier Convertible 1000W/60V , Battery 45Ah with small license plate to drive moped driver's license Loading dimensions L X W X H 120 x 100x x34 + 14 CM RAILING 2 front bench seat Bench with storage compartment Color red 2 speed gearbox for steep mountains Empty weight 265 kg Ab. Total 630 kg ECE Europe-wide expert opinion Stable brakes front discs and rear brake drum Handbrake Lockable seat compartment Tilting tailgate Turn signals and high beam Brake light Reverse beeper Reverse gear Leaf springs on the rear axle for maximum load EU approval, small moped license plate is enough Wheelbase 1915 mm Very good traction even on loose or muddy ground because the weight of the batteries is directly on the drive axle. It lies very well in the curve and  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

max. load: - kg : - weight: - kg 10 off used machine shoes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 400 mm measuring range Y-axis: 400 mm Table dimensions: mm diameter: max. 350 mm weight of the machine ca.: 420 kg dimensions of the machine ca.: 1,23 x 0,75 x 1,91 m Control: Used Tool Presetter in very good condition. Checked by a factory mechanic. Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22 Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

Suction: 410 l/min. Filling capacity: 295 l/min On / switch-off: 8/10 bar Heads / stages: 2/1 container volume: 50 l voltage: 230 V / 50 Hz engine output: 2,2 kW turning speeds: 1000 U/min Sound power level: 97 dB dimensions: 950 x 410 x 875 mm weight: 64 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm table length: 0 mm table width: mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 36/72 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm dimensions of saw-band: 3650x27x0,9 mm total power requirement: 1,5/1,8 kW Overall size: 2130x1400x1950 mm Weight: 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 580 l/min. Filling capacity: 470 l/min On / switch-off: 13/15 bar Heads / stages: 2/2 container volume: 90 l voltage: 400 V / 50 Hz engine output: 4 kW turning speeds: 915 U/min Sound power level: 95 dB dimensions: 1110 x 495 x 1000 mm weight: 111 kg - easy to move thanks to castors and long handle - mobile, V-belt driven piston compressor - Compressor for work up to 15 bar - equipped with filter pressure reducer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 250 l/min. Filling capacity: 150 l/min On / switch-off: 10 bar container volume: 50 l turning speeds: 2.850 U/min Sound power level: 95 dB total power requirement: 1,8 kW dimensions: 910x470x780 mm weight: 38 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. : 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

219mm x 15mm Nanjing API Pipe Plant Year: 2021, Pipe Diameter: 101mm – 219mm, Wall Thickness: 2.75mm – 15mm, Pipe Length :4.2m – 16m, Yield Strength: 63.4Kg/cm2 (max), Line Speed: 10 – 30 meters per minute, Direction: Right to Left, Continuous Operation with Accumulator, Approximate Annual Production: 127,000 ton / year. Coil Car, Uncoiler, Straightener, Shear & Welder, Horizontal Accumulator, Forming Mill with Universal Drives, Individual Gear Boxes, 1,000Kw High Frequency Welder, Outside and Inside Bead Removal with Scrap Winder, Ultrasonic Tester, Cooling Section (Air and Water), Sizing Mill with Universal Drives, Individual Gear Boxes, Turk Heads, Flying Rotary Cut Off Saw, Run Out Conveyor, Straightening Machine, End Facing Machine, Automatic Packaging Line, Tooling, Spare Parts

76mm x 6mm Oto Mill HF Tube Mill Make: Oto Mill, Year New: 2005, Tube Diameter: 15mm – 76mm, Wall Thickness: 1mm – 6mm, Shaft Diameter: 100mm, Speed: 140 mpm, Direction :R-L. Double End Uncoiler with Coil Car, Crop Shear & TIG End Welder, Vertical Accumulator with 80Kw DC Drive, Forming Mill with Seven Forming Stands, and Seven Fin Passes, 110Kw DC Drive, and 70Kw DC Drive, Welding Section with 350Kw HF Thermatool Welder, Adjustable Sqeeze Box, Inside and Outside Scarfing Head, Bead Re-Winder, Cooling Section, Sizing Mill with Four Sizing Stands, and Four Fin Passed, Four Double Sided Turk Heads, 110Kw DC Motor, Friction Type Flying Cut-Off Saw with 74Kw DC Drive, Run Out Conveyor, and Table. Updated Electrics, LCD Display Controls, Hydraulics

For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.

cutting diameter: 320 mm saw band length: 4160x 34 x 1,1 mm cutting width: 450 mm : 320 mm : 320 x 320 mm capacity 90 degrees: flat: 450 x 320 mm capacity 45 degrees: round: 320 mm : 180 mm Capacity 45° rectangular: 330 x 320 mm : 160 mm : 150 mm : 150 x 150 mm capacity 60 degrees: round: 240 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 230 x 220 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged  ...

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 610 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 355 x 320 mm : 280 mm : 280 mm : 280 x 280 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 510 x 320 mm speed: 20 -100 m/min total power requirement: 2,7 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,1 x 1,2 x 1,35 m Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pum ...

cutting diameter: 800 mm saw band length: 9600 mm cutting width: 1300 mm capacity 90 degrees: square: 800 x 800 mm : 1300 x 750 mm : 800 mm : 770 mm Capacity 45° rectangular: 570 x 750 mm capacity 60 degrees: round: 570 mm capacity 60 degrees: square: 770 x 770 mm capacity 60 degrees: flat: 570 x 750 mm : 800 mm : 770 mm : 1070 x 750 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 12,42 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 5,05 x 2,2 x 2,9 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulation ?Material height sensor with rap ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 170 mm cutting capacity - round: 250 bei 45° mm work height max.: 940 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 230 mm total power requirement: 3,0 kW weight of the machine ca.: 665 kg dimensions of the machine ca.: 2660 x 204 x 2060 mm Description: The ARG 330 F. is a robust manual metal band saw with high cutting accuracy for medium to heavy workpieces! Your exceptionally compact design, as well as its massive saw frame made of gray cast iron are ideally suited for use in workshops and production facilities. The The basic equipment of the machine enables the processing of a wide variety of different materials, including stainless and tool steels. With With this machine, miter cuts ar ...

cutting diameter: 90° / 810 mm saw band length: 8200 mm cutting width: 850 mm : 810 x 810 mm : 850 x 810 mm : 480 mm : 480 x 480 mm Capacity 45° rectangular: 480 x 810 mm table height: 585 mm cutting speed: 20 - 100 m/min dimensions of saw-band: 8200 x 41 x 1,3 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3,9 x 1,2 x 2,35 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechan ...

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

dimensions:: innen 1160 x 580 x 580 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 120 kg total power requirement: 1,2 kW weight: 115 kg range L-W-H: 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be  ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3320 x 27 x 0,9 mm weight of the machine ca.: 640 kg Furnishing: - autom. Saw bow lowering, with infinitely adjustable feed - Limit switch-off at the end of the cut - manual function - built-in coolant device - Large mounted turntable for miter cuts from 45 ° right - 60 ° left - saw band - Chip removal brush - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40,0 mm throat: 320 mm bore stroke: 160 mm morse taper: 4 MK table:: 500 x 420 mm turning speeds: 90 - 1455 U/min total power requirement: 1,0 / 1,5 kW weight of the machine ca.: 450 kg. range L-W-H: 500 x 930 x 1870 mm characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sl ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping th ...

width of the strips: 75 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 66,0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding a ...

table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...

wheel diameter: 250 mm grinding wheel size: 250 x 25 x 20 mm turning speeds: 2850 U/min voltage: 400 V total power requirement: 2,0 kW weight of the machine ca.: 28 kg. dimensions of the machine ca.: 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad ...

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from t ...

cutting diameter: 225 mm saw band length: 2480 mm table height: 910 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 160 x 160 mm capacity 60 degrees: round: 100 mm capacity 60 degrees: square: 100 x 100 mm turning speed range:: 45/90 m/min dimensions of saw-band: 2480x27x0,9 mm total power requirement: 1,5 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. turning speeds: 0,6 - 6,0 U/min swivelling range: 0 - 90 Grad bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating in ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Op ...

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight of the machine ca.: 84,0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

cutting diameter: 225 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 160 x 140 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: flat: 110 x 80 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90 mm vice: 245 mm turning speed range:: 46/92 m/min saw band length: 2450 x 27 x 0,9 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: mm Furnishing: - Compact, manual, powerful workshop double miter band saw - for cuts from 45 ° right to 60 ° left - hydraulic, stepless lowering of the saw bow - coolant device - hydr. Lowering from the saw frame - autom. Limit switch-off - saw band - workpiece stop - Operating instructions in German The data for this ad was created with ModulMWS - the software solution ...

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large di ...

Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS