off used for sale

Off-road scissor lift - working platform with crawler chassis. FRONTEQ Type: FS0507T Load capacity: 200 kg Platform dimensions: 125 x 0.7 m Platform extendable + 0.6 m Transport Dimensions: 1.32 m x 1.0.8 m Height: 2.07 m Railing folded down height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German instruction manual included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with a car trailer or in a Sprinter or so with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a ter ...

Off-road scissor lift - work platform with crawler chassis and automatic support. Type: CFPT 0810LDS Load capacity: 450 kg Load capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport Dimensions: 2.78 m x 1.58 m Height: 2.40 m Railing folded down height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Climbing ability up to: 30° Overload cut-off: Powered by battery 48 V / 210 Ah integrated charger 48 V/ 25 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and details on request. The machine is also available with 8 / 12 / and 14m working h ...

scissor lift; Off-road platform with crawler chassis Type: CFPT0608LDN Load capacity: 230 kg Load capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport Dimensions: 2.06 m x 0.99 m Height: 2,17m Railing folded down height: 1.8 m Weight approx.: 1710 Kg Working height: 8 m Platform height: 6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 300 Ah integrated charger 24 V/ 30 A German instruction manual included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with car trailer with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing i ...

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A TIG AC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A Electrode welding operation: Rod electrodes: 1.5-6 mm Open circuit voltage: 80 V Working voltage: 20-32.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A  ...

COMPOSED OF: 1 x Rotor Remanufactured + balanced+ equipped 2 x Rotor (need to be refurbished) 1 x Clamping device for balancing 9 x Impact strips (Large) 6 x Impact bar (small) 2 x Enema cone 3 x tear-off edge various rotor protection plates CONSISTING OF: 1 x Rotor newly reconditioned + balanced+ fitted 2 x Rotor (must be reconditioned) 1 x Clamping device for balancing 9 x Blow bars (large) 6 x Blow bars (small) 2 x Inlet cone 3 x Tear-off edge Various rotor protection plates

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

Chicago Loop Slitting Line 48″ x .040″ x 40,000Lb (A3756) 48″ x .040″ x 40,000Lb Chicago Loop Slitting Line Stock#: 19650C Make; Chicago Material Width: 12″ – 48″ Material Thickness: .005″ – .040″ Coil Weight: 40,000lb Coil ID: 20″ Coil OD: 72″ Speed: 1500 feet per minute Entry 4-Arm Turnstile Powered Rotation ID Protective Arms Entry L-Type Coil Car Hydraulic Lift & Traverse Self – Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion AC Feed-Up Motor Drive Water Cooled Brake Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Three (3) Slitting Heads Ejection Type Head Change Arbor Diameter: 4″ Lots of Knives & Tooling 50HP DC Motor Drive Scrap Baller AC Motor Drive Automatic Dumping Pit Cross Over Table Cascade Entry & Exit Rolls Rotary & Drag Board Tensi ...

60″ x .187″ x 50,000Lb Stamco Loop Slitting Line Make: Stamco Material Width: 12″ – 60″ (Recoiler Mandrel is 56″) Material Thickness: .020″ – .187″ (.135″ Stainless) Coil ID: 20″ Coil OD: 26″ – 72″ Coil Weight: 50,000Lb Direction: Left to Right Entry 4-Arm Coil Turnstile Powered Rotation Entry L-Type Coil Floor Standing Design Powered Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Sliding Base Water Cooled Brake Feed-Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Air Clutch & Brake Two (2) Slitting Heads Arbor Diameter: 9″ Slitter Face Width: 56″ & 60″ Powered Arbor Adjustment Motor: 100HP DC Tooling with Tooling Rack One Scrap Winder Hydraulic Motor Powered Open / Closed Herr-Voss 6-Hi Strand Extensioner Number  ...

Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, m ...

This is a granulate dishwasher from the manufacturer Wexiödisk, type WD-100GR from the year of construction 2016. Wexiödisk granulate pot dishwashers clean all stainless steel kitchen utensils with water added to plastic grains. Even burnt-in grease can be removed quickly and easily. The dishes do not need to be soaked or scrubbed; only loose food residues are scraped off to avoid unnecessary contamination of the rinsing water. Thanks to the unique, double-door push-through system, the WD100GR differs from all other pot washers on the market; The dirt and clean sides are completely separated from each other. The scope of delivery includes the inlet table, the cassette trolley and two cassettes. The inlet table is equipped with a water faucet and a hose holder, so that a hand shower can be installed quickly and easily for pre-rinsing. The dishwasher has undergone a major predictive insp ...

Stamco Loop Slitting Line 60″ x .135″ x 40,000Lb Make: Stamco Material Width: 12″ – 60″ Material Thickness: 010″ – .135″ (stainless), .190″ (aluminum) Coil ID: 20″ Coil OD: 72″ Direction: Right to Left Entry 4-Arm Turnstile Powered Rotation C-Hook Arm Slot Entry L-Type Floor Standing Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Sliding Base Water Cooled Brake Feed-Up Motor Drive Hydraulic Peeling Table Entry Guiding Roll Entry Mechanical Crop Shear Driven Pinch Rolls Adjustable Edge Guides Two (2) Slitting Heads Arbor Diameter: 7″ Crane Removable Heads Adjustable Arbors Motor: 75HP 1750 / 2100 RPM Lots of Knives and Tooling Two (2) Scrap Winders Hydraulic Motor Drive Powered Open / Close Pit Cross Over Table Cascade Rolls Drag Board Tension Stand  ...

Cincinnati Loop Slitting Line 48″ x 0.075″ x 20,000Lb Make: Cincinnati Material Width: 12″ – 48″ Material Thickness: .005″ – .075″ Coil Weight: 20,000lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry L-Type Coil Car Hydraulic Lift & Traverse Self – Contained Hydraulics Mandrel Uncoiler Powered Expansion AC Feed-Up Motor Drive Water Cooled Brake Hydraulic Peeling Table X-Ray System Driven Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two (2) Slitting Heads Ejection Type Head Change Arbor Diameter: 5” Lots of Knives & Tooling 50HP DC Motor Drive Two (2) Scrap Winders Hydraulic Drive Powered Open / Close Pit Cross Over Table Rotary Type Tension Stand DC Motor Drive Coated Tension Rolls Recoiler Powered Over – Arm Separator Hydraulic Push-Off Powered Gripper 50HP DC Motor Drive Exit Single Ar ...

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD

Vacuum Filling Machine / Sausage Filling Machine / Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 220 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and turning off all types of casing. Particularly gentle filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and pause length infinitely variable selectable Level indicator, piece counter, quantity cut-off Portioning range 5 - 10,000 g Portioning speed up to 450 portions/min. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs unique hygienic design modern drive concept minimal energy consumption 12" touch screen control extremely quiet and quiet ope ...

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 8-head capping machine also works very quickly, precisely and is suitable for aluminum twist-off caps. The vials are guided individually, which enables safe and fast filling and capping. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 8 | filling volume: max. 30ml per vial | speed of the machine  ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 1-head capping machine also works quickly, precisely and is suitable for aluminum twist-off caps. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 1 | filling volume: max. 30ml per vial | speed of the machine in neutral: max. 120 bottles/min (at 4 filling stations and 5ml per vial) | accuracy: =  ...

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine photo shows an open machine without protective covers and safety doors for a bet ...

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smallest batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days Specifications: - Flour capacity: 1 - 8 kg - Dough capacity: 1.5 - 12 kg - Boiler volume: approx. 20 litres - Motor p ...

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for smaller batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for small batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 127200 € : 2518.56 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

cutting diameter: 260 mm saw band length: 4115 mm cutting width: 260 mm cutting range square: 260 x 260 mm height of material-table: 950 mm material feed: 600: 3x reversierbar mm multiple feed until: 1800 mm dimensions of saw-band: 4115 x 32 x 1,1 mm cutting speed: 15-125 m/min power capacity saw: 4 kW control: Minipos 807 min. cut-off length: 6 mm Remaining piece length: 10 / autom. 110 mm total power requirement: 6,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,09 x 1,9 x 2,03 m Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Chip conveyor: Cooling equipment: Material feed: NC fully automatic band saw with vertical saw band run (saw unit off polymer concrete), cutting area around 260 mm, control Minipos 807, Clamping pressure regulation of the vices by means of a hand wheel and manometer, stepless cutting speed and cutt ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

bushing cut-off diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

1230pcs LOKITEC Oil Radiator Electric Heater  This batch of high-quality electric oil radiators from LOKITEC provides an efficient and comfortable heating solution for various living and working areas. With an impressive wattage and a host of smart features, these radiators provide pleasant warmth and maximum comfort. Certifications: All oil radiators are CE, ROHS and CB certified, which ensures their safety and quality in accordance with international standards. Offering an outstanding combination of performance, efficiency and comfort, these oil radiators are ideal for use in a variety of environments. With their robust construction and numerous features, they are a reliable heating solution for cold winter days. Quantity: 1230 pieces  New RRP total € 190,510 Unit price 18,00 € net Transportation can be arranged by us.  Specifications and features: 1. LOKITE ...

Live tools on all turrets (12 positions each turret) Y axis on all turrets High pressure system with cartridge filter - max 18 bar, swarf conveyeor TECNOFORME Auto shut off Bar loader interface Type G pick-up arm for sub-spindle including conveyor belt for finished parts External cleaning blow for spindle and counter spindle Internal cleaning jet with coolant for counter spindle Polygoning Monitoring of cutting forces and tool life Navigator system for fast search of the piece zero, work clamping, N° 1 collet chuck Hainbuch SPANNTOP ASA 8 GR. 80mm - main spindle, N° 1 collet chuck Hainbuch Axfix ASA 6 GR. 80mm - couter spindle, tool holders, Set of tool holders Marchetti consists of:, N° 1 cut-off tool holder with coolant supply, N° 2 boring bar holder 40mm internal coolant supply, N° 4 boring bar holder 32mm internal coolant supply, N° 2 duple toolholder for tool shaft  ...

Disc valve, flapper valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Manufacturer: Festo, pneumatic valve on-off valve orig -Type: HEE-D-MINI-24 -PN: 2.5-16 bar -Number: 2x valves available -Price per piece -Weight: 0.3 kg/pc.

Overview The Bag in Box filler was manufactured in 2009. As the owner has upgraded his filling equipment, this machine is for sale. Technical Specification: Capacity: 600 bags/h at 3l 500 bags/h at 5l 400 bags/h at 10l 200 bags/h at 20l Nitrogen jet system on filling valve Features: Machine is completely made in stainless steel; the supporting frame is composed of a heavy welded tubular and the surface is handled in conformity with a particular treatment where special glass micro-spheres are used (of auto-draining type and washable), particularly suitable for the food processing industry. Adjustable jerk-cutter which is insert in loading position of the bag before filling, to avoid useless mechanical stress. Filling valve complete with mechanical capacity limiting device; it is completely made in AISI 316 stainless steel with seals suitable to be sanitized by steam (with the possibility  ...

Piston compressor SCHNEIDER type UniMaster UNM 580-15-90 DX Serial number: 10022047 Retail number: A715101 Year of construction 2014 Intake flow rate 580 litres/min. Filling capacity 470 litres/min. Pressure capacity 15 bar Boiler capacity 90 liters Sound level 95 dB(A) Motor power 4 kW Mains connection 400 Volt, 50 Hz (with 16 Amp. Plug) - 2 cylinders in row arrangement oil-lubricated - Compressed air unit with pressure reducer and fog lubricator - 1 piece of air connections with quick-change coupling via fog lubricator - 1 piece of air connections with quick-change coupling without lubricator - Condensate drain via ball valve - Pressure switch set to 15 bar- Running time from 0 bar to 10 bar cut-off pressure = 1 min, 50 sec. - Running time from 0 bar to 15 bar cut-off pressure = 2 min, 50 sec. - mobile, space requirement: L x W x H, 1100 x 500 x 1000 mm , weight: 116 kg , good conditio ...

Ref.Nr. 0808 Name of the system Exhaust air scrubber C180 Manufacturer: Kyocera Model C180 Year of construction 2022 ACCORDING to order confirmation from the manufacturer Description Exhaust air scrubbers for installation next to the exhaust or free installation for washing (absorption) of aggressive and toxic gases from the exhaust air directly at the point of origin. For cleaning, the exhaust air is passed through a spray mist, which is generated by a specially designed conveyor and spray wheel. The purified exhaust air is passed through agglomerators and mist eliminators to prevent moisture from entering the exhaust air system. Execution 1 housing made entirely of polyprophlen (PP), (see below for the overall dimensions of the device) 1 block flange DN 250 with 4 connections on the right, left and top sides 2 sealing covers to close the connections that are not ne ...

Used, Year of Construction 2016 Offer Barth VacuuCar®+ with extra accessories from a part-time carpentry workshop for sale in top condition. The additional automatic shut-off system keeps the vacuum above a separate accumulator, so that work can be carried out without the noise of the pump in the case of dense plates. Vacuum pump for continuous operation 3m3 / h / 120 Watt with dust filters Foot valve for loosening the clamped workpieces Base frame with 90° rotation axis for vacuum cups 2 vacuum flat cups 900 mm / round, 250 x 80 mm with quick-change system Pull-outs on both sides + 450 mm 5 swivel support strips made of squared timber (wood/carpet) Integrated 3-way power strip for additional devices Hydraulic height adjustment with reversible hand crank 6-way adjustable bench hooks as a support Four castors, 2x brakeable and 2x with directional lock L x Br x H: 1350  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Perkins Engine: 404A-22G1 Engine No.: in production Power: 18.4 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: NPE32-2M/4C Gene. No.: in production Generator power: 20 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 90 Dimensions of the power unit: Width approx. mm: 700 Height approx. mm: 1.650 Leng ...

Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.

Centering tip, lathe tip, grain tip, with break-off nut HAHN & KOLB 22 120 030 005654 -MK3 Center angle: 60° full tip Material: Tool steel Break-off nut: Width across flats: 41 mm Centering tip: Width across flats: 29 mm New ! Dimensions (centering point): 138 x 47 x 41 mm Dimensions (packaging): 200 x 62 x 55 mm

Cantilever rack, one-sided, frame height 2.60m height, 80cm deep arms, 750kg per arm, hot-dip galvanized - new - : Price from location incl. loading! Price: 1.515.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units out of them by omitting or buying additional frames (or also by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new product Description: - Shelf stand on one side 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - With 3 height-adjustable shelf arms each - Load capacity at centre of gravity 400 mm - 750 kg per arm / 2..250kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg P ...

We offer it dismantled and CIF ITALIAN PORT., In very good conditions,still connected, can be seen in work on appointment or on a video call. The line includes: N. 2 extruders diam. mm.55, 78 kW 30 L/D N. 1 extruder diam.75 mm. 142 kW, 30 L/D n. 3 lever type screen changers Melt control system 3-layers still die Ø mm.300 gap. mm.1,4 IBC cooling system AM500/2 dual flow cooling ring 2 temperature exchange batteries electrical cabinets with Mitzubishi inverters Oscillating pull-off system width mm.1700, working width mm.1600, Gusseting units FIFE web guider mm.1700 Bubble driver with vertical adjustment and sensor for automatic bubble inflating (maximum Ø 1.175 mm.) for 3.386 mm.web circumference) Back to back winding station 1.680 with 4 expandible mandrels Automatic film cutting Automatic reel unloading system Bolted 12 m.tall tower with 3 storey, ladders (10 m. at 3rd floor + 2 m. pul ...

RA1851 electromechanical pusher installed in a support frame made of aluminum profiles Function: Push-off of the incoming material 90° to the conveying direction Make: Transnorm outer dimensions of the frame: LxWxH=1.720x1.080x940 mm suitable for infeed conveyor up to 1000 mm total width dimensions of the push-off panel: H=600 mm, W=650 mm total weight: 108 kg Features: condition: good (used) Construction year: 2008 Länge in mm: 1720 Width in mm: 1080 Height in mm: 940 Nominal / outside width in mm: 1080 Antrieb: SEW Getriebemotor mit MOVIMOT Electric data: 380-500 KW: 0,055/0,55/S1 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. ...

Key data: 1300 mm, 2 , 160 mm

Wide belt sander Bütfering SWT 525 QC Optimat Working width 1350 mm Number of aggregates 2 1. Transverse grinding unit with -Inside running felt ribbed tape - infinitely variable, frequency-controlled cutting speed 2 – 16 m/s. -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Belt blow-off device, workpiece-controlled 2. 1 combined grinding unit with: • Automatic aggregate locking - infinitely variable, frequency-controlled cutting speed 2 – 18 m/s. -an automatically adjusting, profiled steel contact roller, with grain compensation for calibration -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Grinding insert 110 mm wide • Co-rotating and counter-rotating device of the abrasive belt -Strip blow-off device, workpiece-controlled (one blowing rod each for co-r ...

Documents drawings_information_parr_5410.pdf equilabo_offer_details.pdf Technical details The distinguishing feature of a fluidised bed reactor is that the bed of solid particles or catalyst is supported by a rising gas stream. This reactor allows the catalyst to be easily loaded and removed. This is advantageous when the solids bed has to be removed and replaced frequently. High conversion at high throughput is possible with this style of reactor. These reactors inherently have excellent heat transfer and mixing characteristics. GAS FEED: Two reactant gas feed lines, each with normally-closed automated pneumatic shut-off valve, filter, bypass valve, and reverse-flow check valve. One gas feed line has a mass flow controller sized for up to 0.5-25 SLPM of nitrogen with up to 2 bar delivery pressure. The other gas feed line has a mass flow controller rated for up to 50  ...

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -Max. Discs: Ø 178 mm -Speed: max. 8500 rpm -Number: 74x angle grinder available -Price: per piece -Weight: 4 kg/piece

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs