oerlikon 3 used for sale

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Fan: 230 V 19 W -Dimensions: 205/205/H110 mm -Weight: 0.9 kg

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 3500 mm -Width: 1750 mm -Plate thickness: 50 mm -Plate: with support ribs -Dimensions: 3500/1750/H815 mm -Weight: 4750 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Henninger, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Dimensions: Ø 116 x 300 mm -Weight: 8.2 kg

Steel Plate Length: 3800 mm Width: 1400 mm Thickness: 130 mm 17 T-slots T-slots dimensions: 42 x 27 mm x total height 40 mm External Slots spacing: 300 mm Internal Slots spacing: 200 mm Holes diameter: Ø 40 mm Weight: 5 T

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer s ...

Camera, hand button with display Max. gauge length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated probe camera Measurement accuracy ±(28 + 5 L/1000) μm Repeatability ±10 μm

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger -Manufacturer: Bloksma, heat exchanger shell and tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm -Weight: 61 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet chuck: MK6 -Type: SWN301/3 MK6 SWN 301/1 GR32 -Clamping sleeve: Ø 7 mm -Dimensions: 80/70/295 mm -Weight: 5.6 kg

Tailstock, counter bearing for dividing head, dividing head -Manufacturer: Swedturn, Type ST12 CNC 300 tailstock -Quill: hydraulically driven -Dimensions: see photos -Dimensions: 900/650/H450 mm -Weight: 265 kg

Inv. Num. : 8070 Type: Multiturn 3000 Producer: Colchester Created: 2005 Parameters: Control system: FANUC Maximum turning diameter over bed: 460 mm Maximum turning diameter over support: 270 mm Spindle diameter: 78 mm Motor power: 11 kW Maximum spindle speed: 2250 1/min Travel X: 296 mm Travel Z: 1530 mm Equipment: Owner Vacuum

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 420 mm -Length: 3850 mm -Transport dimensions: 570/420/H470 mm -Weight: 24 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 3.5 m -Transport dimensions: Ø 220 x 610 mm -Weight: 22 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Transport roller: Transport chassis -Load capacity: t -Dimensions: 350/250/H145 mm -Weight: 17.3 kg

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Schütz power contactor -Type: 3RT1065-6AP36 -Auxiliary switch: Type 3RH1921-1HA22 -Dimensions: 360/150/H210 mm -Weight: 6.4 kg

Pressure filler Krones Mecafill type: VK2V K126-308 with 96 filling valves and 18head crowner with short filling tubes with double pre-evacuation with HDE (hot water injection) complete reconditioned in 2009 by company Krones clockwise direction - from left to right capacity: approx. 35.000 bph by 300 ml softdrinks products: beer, alcohol free beer, long drinks, cocktails, cider, softdrinks, carbonized water, still water with Siemens S7-300 PLC and HMI touchpanel including all available spare parts The filler is still in production until September 2025 and can be inspected during procduction

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Schütz power contactor -Type: 3TF54 -Dimensions: 360/145/H200 mm -Weight: 7.6 kg

Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...

Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Schütz power contactor -Type: 3TF52 -Dimensions: 310/135/H185 mm -Weight: 5.4 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators -Manufacturer: Wago, fieldbus coupler type: 750-323 -End module: 750-600 -Individual components: see photos -Dimensions: 70/60/H100 mm -Weight: 0.2 kg

Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...

AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...

Gear motor, electric motor, three-phase motor, feed motor -Manufacturer: Weg, gear motor with attachments -Engine: Type ODG 732 T/372 -Power: 0.55 kW -Gearbox: Type ZB 4824 i= 645 -Drive wheel speed: 30 rpm -Dimensions total: 360/250/H350 mm -Weight: 31.1 kg

Steam generator, evaporator -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece

Collator tb sprint B 312 VP 12 Station variable pile up to 30 cm formats: max. 35 x 65 cm, min. 6.5 x 10 cm paper weights: 20 to 1000 g/m² speed: up to 3300 cycles/h current: standard 400 V, 50 Hz, 3/N/PE additional equipment: • single sucker- and -blower valves, individually adjustable • controlled blast and separating air • missed sheet detector, photo electric, each station • double sheet detector electromechanical at the delivery • paper jam detector over transport table • lighting of transport table • hand feeding station right • delivery jogger for normal- and criss-cross-delivery, selectable by switch • total- and preselection batch counter • SPS programme control with - Touch Screen - missed sheet repeat without machine stop with the next cycle - ejector, faulty sets are separated while running, max. set thickness 4 mm - programmable, au ...

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Venjakab, belt conveyor on solid base frame, without drive -Webbing: Type H 6.5 m -Belt width: 1985 mm -Conveyor length: 3 m -Transport dimensions: 3060/2430/H940 mm -Weight: 740 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, contactor type 3TF47 -Dimensions: 115/90/H125 mm -Weight: 1.4 kg

push rod -Push rod: hole spacing 288 mm -Mounting: Ø 35 / 22 mm -PipeØ: 60 mm -Dimensions: 360/75/H75 mm -Weight: 5.7 kg

Bezel, steady rest, lynette -Bezel: lower part 2 pieces -Type: 79031/4 -Clamping width: 147 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions each: 340/55/H70 mm -Weight: 9.1 kg/piece

weight: 145 kg engine output: 1,27/1,7 kW : 83 dB speed: 15/30 m/s : 150x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 670 mm, 1500 , 1125

Machine type: EVP-A 350 Manufacturer: ERBA Power kW: 2.2 Total volume: 350 lt. Description: The EVP-A 350 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. ...

Key data: 45 °, 3200 mm, 1200 mm

Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable

Vertical machining center TC-32BN QT :::TECHNICAL SPECIFICATIONS::: CNC Model: Brother - CNC Version: B00 - Tool Holder: BT 30 - Spindle Power: 11Kw - Number of Spindle Revolutions: 12000 Number of tools: 26 - X-axis travel: 550mm - Y-axis travel: 400mm - Z-axis travel: 415mm - Rapid feeds for linear axes X Y Z: 70m/min Guides: roller CNC divider: yes Divider brand and model: No. 2 NIKKEN Rotation: Continuous Pallet change: yes Pallet size: 600 x 425mm Maximum allowable load: 200Kg Round pallet: yes High refrigerant pressure: yes Chip conveyor: belt Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Length: 1890mm Width: 3669mm Height: 2360mm Weight: 4600Kg

USED TETRA PAK TPA 19 330ML PRISMA FILLING LINE FOR SALE YEAR 1998 Item #: Usm-214 Category Tetra Pak TBA 19 TPA 19 330ml Prisma Filling Machine, Version 10v, Working Hour 20500, Year 1998 Tetra Cardboard Packer 70, Year 1998 Easy ride Conveyors and Paper trolly Condition: Good

Motore jenbacher 320 Diane xt4 con container ed ausiliari Revisione delle 60.000 ore effettuata da casa madre

Machine vice, sturdy vice, drill press vice -Machine vice: with MK5 / M20 holder -Type: 36642.M11 -Clamping jaws 80 x 22 mm -Clamping depth: 40 mm -Dimensions: 215/175/H80 mm -Weight: 3.7 kg