oerlikon 3 used for sale

Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg

Leybold SV 300 with 5.5 KW AC-motor, 300 m3/h, max. vacuum: x 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Oerlikon Leybold SV 300 B with 5.5 KW AC-motor, 300 m3/h, Final pressure: < - 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Stick electrodes 4.0 x 350 -Type: Overcord -Price: per package -Number: 5 packages available -Weight per package: 5 kg

Stick electrodes 4.0 x 350 -Type: Fincord S -Price: per package -Number: 6 packages available -Weight per package: 4.4 kg

Stick electrodes 4.0 x 350 -Type: Fincord -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Stick electrodes 2.0 x 350 -Type: Special -Weight per package: 3.9 kg

Stack electrode 4.0 x 350 -Type: Cromocord Kb -Weight per package: 4.8 kg

Stick electrodes 2.5 x 350 -Type: Overcord -Price: per package -Number: 5 packages available -Weight per package: 4.8 kg

Stick electrodes 3.2 x 300 -Type: CITOCHROMAX N -Price: per package -Number: 13 packages available -Weight per package: 2.9 kg

Stick electrodes 4.0 x 350 -Type: Overcord -Price: per package -Number: 6 packages available -Weight per package: 4.8 kg

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Oerlikon Leybold Trivac D 8 B with 0.37 KW AC-motor, 8 m3/h, final pressure:

Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW EW engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty

Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW DS engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty

Leybold vacuum pump SV 100 B with 2.2 KW AC-motor, - 0.5 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Oerlikon/Leybold roots vacuum pump WA/WAU 501 with 2.2 KW AC-motor, 500 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Oerlikon/Leybold roots vacuum pump WAU 1001 complete with 4.0 KW AC-motor, 1000 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

Various spare parts for Oerlikon lathes.

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

Nominal diameter 40 mm, angle valve , 24 V , 2.5 W

offer 22629 TIG welding machine - air-cooled equal-alternating current system, mobile - for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - Welding current TIG infinitely adjustable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current indicator - Frequency control of the arc - HF ignition - Pulse device - Hose package 5 m -Reducer - Ground cable - Carriage - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

Arc welder Manufacturer: Oerlikon Type: Minicito

Stick electrodes 4.0 x 450 -Type: Special -Weight per package: 5.3 kg

Stick electrodes 5.0 x 450 -Type: Fincord Price: per package -Number: 4 packages available -Weight per package: 5.5 kg

wire electrode, welding wire, welding wire -Cored wire: Fluxofil: 36 -Diameter: 1.6mm -Dimensions: O 300/100 mm -Weight complete: 15.6 kg

wire electrode, welding wire, welding wire -Cored wire: Fluxofil 31 -Diameter: 1.6mm -Dimensions: O 300/100 mm -Weight complete: 15 kg

wire electrode, welding wire, welding wire -Cored wire: Carbofil 1 -Diameter: 1.6mm -Price: per roll - Quantity: 2 pieces -Dimensions: O 300/100 mm -Weight per roll: 15 kg

Stick electrodes 2.0 x 250 -Type: Fincord -Price: per package -Number: 2 packages available -Weight per package: 1.7 kg

Stick electrodes 5.0 x 450 -Type: Supercito E51 55 B 10 -Price: per package -Number: 13 packages available -Weight per package: 5.5 kg

Stick electrodes 4.0 x 450 -Type: Extra EY 42 53 Mn B -Price: per package -Number: 29 packages available -Weight per package: 5.4 kg

electric motor, three-phase motor -Power: 0.75 kW -Speed: 910 rpm -Shaft diameter: 24 mm -Design: B3 -Protection rating: -Dimensions: 365/255/H215 mm -Weight: 33 kg

Line defrosting transformer, defrosting device, pipe defrosting device -Type: LA125 -Primary: 220 V/13 A -Secondary: 56 V/60-125 A -Dimensions: 430/200/H400 mm -Weight: 40 kg

Welding rectifier, electrode welding machine, electrode welding rectifier -Welding current: max. 220 A -Dimensions: 1200/700/H720 mm -Weight: 280 kg

Machine type: Submerged arc welding machine Manufacturer: Air Liquide / Oerlikon Type: CPQ170126926 / incl. power source, turn-tilt device, container rotation device Year of Make: 2017 Condition: used / very good, few operating hours Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-AIR-0824 DESCRIPTION We offer you a used UP welding machine from the manufacturer Air Liquide / Oerlikon. - Starmatic 1200i AC/DC - Citowave III / 420 - Posimatic PS15 / Tilt and Tilt Device - Container turning device Weight approx. 7t More detailed dates will follow Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact detail ...

current capacity: kVA throat: mm contact pressure capacity: kp volume capacity: Punching capacity: kN punching cross-cut in cmm: stroke: mm weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

turning diameter over bed: 1000 mm turning diameter over slide rest: 640 mm turning length: 6300 mm turning dia. in gap: 1250 mm spindle diameter: 50 mm speed: 6-925 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible.

max. wheel diameter: 500 mm Hypoid adjustment: ±70 mm axial cross angle: 90 ° Distance Y-: 150 - 350 mm Distance Z-axis: 120 - 340 mm turning speed range - stepless: 0 - 5000 U/min max. torque on the spindle: 57 Nm Cone: 99,2 mm Pull-in force Tool clamping: 23000 N Braking torque max.: 93 Nm total connected load: 20 kVA total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,35 x 2,24 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mm gear width: 630 mm max. module: 16 min. module: 1 wheel diameter with counterstay: 800 mm max. number of teeth: 999 clamping length: 1060 mm workpiece weight: 1500 kg max.helical angle: 45 ° grinding spindle drive: ca. 20 kW Control: Opal / Siemens total power requirement: 70 kW weight of the machine ca.: 17,5 t - CNC control Opal / Indramat with Siemens S5 PLC - paperbandfilter - oil mist exhauster - complete covering The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.