oerlikon 3 used for sale

cutting diameter: 355 mm dimensions of saw-band: 3770 x 34 x 1,1 mm cutting speed: 20 - 80 m/min cutting width: 490 x 280 mm : 290 mm Impact energy: 250 mm : 230 mm : 180 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions: 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 3400; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

Original Jenbacher 320 Container Gas line Oil tanks Control panels Circuit breakers Alternators Multiple containers available for sale Now. Price: Please Apply Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange .

Key data: 526 KW, 910 kVA, 400 V

Jenbacher JMS 312 GS-B.LC - Container Design Number: F866 Year of construction: 2009 Country: Switzerland Site Name: Aarberg Module number: 803588 Engine number: 6128071 Serial number: 323762 Engine type: 312 Engine version: C225 Gas type 1: Biogas Control System: Dia.ne XT Power Output: 544 kW Electrical Output: 526 kW Thermal output: 505 kW Alternator: NEWAGE Type: HCI 634 H2 Type Rating: 910kVA Voltage 400V Frequency: 50Hz Turbocharger: PBST Type: TCR12-42516 Actual OH: 126,000 Starts: 5543 Service: Equipment was serviced by IWK (authorized Service Partner of INNIO for Switzerland). At 60k OH the Longblock was exchanged, at 105k OH the Minor Overhaul (40k) was done. Till next Major Overhaul the engine has approx. 15k OH left.

- Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning Dimensions : - Length : 1800 mm - Width : 850 mm - Height : 2000 mm

Refrigeration system in two versions! You can purchase both or individually. Year of construction :2005 Power : 51,8kW Voltage : 400V 50Hz For further information, please refer to the type plate.

WEGENER BM 301 plastic bending machine was built in Germany by Wegener International GmbH. The machine was regularly maintained and upgraded throughout its service life. In 2022, a general overhaul was carried out at the machine manufacturer. WEGENER BM 301 is the perfect choice for precision forming of thermoplastic sheets made of, among others, PVC, PC/ABS and PMMA with a maximum thickness of 15 mm and a width of 3050 mm. The machining process is performed by means of heating elements in the form of a lower flat strip and an upper V-shaped strip, which heat the material at a controlled temperature to a plastic state. The material is then bent to the desired angle between 0° and 110°. The use of the highest-quality heating elements ensures efficient and even heating of the material along the bending line. They are moved manually along hardened steel rollers. Repeatable positioni ...

; Gross weight [kg]: 1055; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 87

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

turning diameter: 200 mm turning length: 0,0 mm control: Siemens 810 D working spindle speed range: 4200 U/min travel -x axis: 210 mm travel -z axis: 610 mm spindle passage: 65 mm total power requirement: 0,0 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Riveting machine (1 head) Make Hang Model 84 HS 350 Year 1992 Distance till frame 300 mm Rivet transport Automatic rivet transport

Control Other GDW Spindle Passage [mm] 43 Rotary diameter. [mm] 300 Turning length [mm] 650 Main spindle: Belt spindle technology Speed 4,500 rpm Power (max.) 7.5 kW Torque (max.) 80 Nm Spindle Passage 43 mm Workpiece clamping 3-jaw chuck, Röhm ZS ø160 mm Tool carrier (X/Z): Technology slide with 4-cavity turret Tool holder ready size 1 Travel in X/Z 170/650 mm Rapid traverse in X/Z 6 m/min Tailstock: Technology Manual tailstock with handwheel Quill stroke 110 mm Quill ø 50 mm Quill Cone MK3 Equipment/accessories: Chip disposal chip tray Coolant Management KSS Pump Tool holder Div. gebr. Parat Holder Further accessories 4-jaw chuck ø160 mm, various used Baking

The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

For sale is a functional, reliable Rehsler industrial cooler of the type TAE EVO tech 381. Ideally suited for machine cooling, industrial processes or production plants. Until recently, the chiller was used in an industrial company as part of a production plant. Technical data: Manufacturer: Rehsler - Model: TAE EVO tech 381 - Year of construction: 2018 - Refrigerant: R410A - Refrigerant capacity: 17.5 kg - Power: 42.0 kW - Max. current consumption: 75.0 A - Protection class: IP54 - Max. operating temperature: 35 °C - Ambient temperature: -20 °C to +43 °C - Weight: approx. 995 kg - Pump Type: P3 More information about the cooling unit: - Robust industrial design - CE certified - Maintenance documents/documentation available If you have any questions, please feel free to contact us at any time.

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Orsta, pneumatic cylinder A125-32x320 TGL 20744 -Stroke: 230 mm -Piston rod: Ø 32 mm, M20 x 1.5 -Dimensions: 610/155/H155 mm -Weight: 15.7 kg

Solenoid valve, directional control valve, valve manifold, control valve -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas HDMF 50/36x550 -Type: HDMF 50/36x550/VORM HS 3750 -Stroke: 550 mm -Piston rod: Ø 36 mm/M22 x 1.5 -Total length retracted: 805 mm -Dimension: 805/160/H160 mm -Weight: 22.3 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Cavazzuti, pneumatic stamp -Stroke: 360 mm -Cylinder: Ø 85 mm -Piston rod: Ø 18 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 230/120/H540 mm -Weight: 10.3 kg/piece

Round table, round dividing table, dividing head, dividing head -Table: Ø 300 mm -Bore center: Ø 62 mm -Height: 115 mm -Groove: 16 mm -Dimensions: 460/420/H115 mm -Weight: 61 kg

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 320 mm -Bore center: Ø 25/40 mm -Height: 110 mm -Groove width: 14 mm -without transport hook -Dimensions: 540/470/H200 mm -Weight: 64 kg

TIG welding rod, welding wire -Manufacturer: Avesta -Type: 316L-Si/SKR-Si Ø 1.6 x 1000 mm -Mat.no.: 1.4430 W 19 12 3L Si -Dimension package: Ø 42 x 1010 mm -Weight: 5.1 kg

Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg

TIG welding rod, welding wire -Manufacturer: Avesta -Type: 316L-Si/SKR-Si Ø 2.0 x 1000 mm -Mat. no.: 1.4430 W 19 12 3L Si -Package dimensions: Ø 44 x 1010 mm -Weight: 5.1 kg

Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg

Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg

Wire-O punching machine Make Bomco Model EPS-330 Year Working width 330 mm Tools 3:1 Wire-O tool with round holes Details Electric, other tools can be purchased Available direct

turning diameter: 820 mm turning length: 300 mm turning diameter over slide: 465 mm control: max. torque on the spindle: 3000 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: mm steady: mm main drive motor: 50 kW diameter of main spindle: 170 mm spindle passage: 128 mm tailstock quill diameter: 125 mm tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm total power requirement: 52 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Manufacturer: Fischer, pressure booster cylinder from Fischer DHS 12 / 3000 guillotine shears -Shaft: Ø 65 mm -Dimensions: 1125/340 / H580 mm -Weight: 326 kg

Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

We have a revised 3412 integral motor unit available to be used as a generator or converted into a motorcycle pump. Manufacturer: CATERPILLAR Model: 3412 Arrangement: 2385363 Serial Number: 41202591 Power: 682 KW Type: Stationary Diesel Manufacture: 2004 Rated rotation: 1,800 RPM

Technical data for the pallet rack beam: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack traverse, used Material color: blue Box profile: 127 x 50 mm Truss type: PT36.127SN Agraffe: 3 HK (hook) clear width: 3,600 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Sirius type 3RV1031-4DB10 -Current strength: 18 - 25 A. -Dimensions: 150/60/H160 mm -Weight: 1.1 kg

Technical data for the pallet rack beam: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack traverse, used Material color: sendz. galvanized Box profile: 120 x 50 mm Truss type: SLB 120|15 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 2,700 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens power supply unit -Type: 3RX9307-1AAOO -Input: 102-132 V AC/195-253 V AC -Output: 30 V DC/4 A -Price: per piece -Number: 5 pieces -Dimensions: 110/75/H135 mm -Weight: 1.2 kg/piece

Technical data for the pallet rack beam: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack traverse, used Material color: light blue Box profile: 100 x 50 mm Truss type: SLO 102|2 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 1,300 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 330 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Dimensions: 485/53/H53 mm -Weight: 1.9 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 10.FO.R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm -Weight: 4.1 kg

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...