126,701 used machines on RESALE, but how to find them? Machine Search
danfoss pressure transmitter mbs 3000
We still have 2 pieces in stock. Price ex stock and per piece
3 phase squirrel cage motor, 90 kW 1007 r/min, 400 V D, 50 Hz, 158,000A, cos.phi 0.810, TCLB, 40 degrees C, 1000 m, price ex works
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 1500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Robot SEPRO en bon état Référence : S900-II type 3041 BZ Année 2002
Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...
An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...
Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...
: 150 t : 3100 mm : 2600 mm : 400 mm : 270 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Max mechanical speed: 190 mpm (630fpm) Max. web width: 370 mm (14"4/8) Flexo Printing repeat range: from 5,5" to 24" Maximum flexo printing width: 360 mm (14"1/8) Maximum die cutting width: 360 mm (14"1/8) Web tension: max. 30 kg Drivers and motors: Emerson - Control Techniques Regulations: "CE" Mark Die cutting repeat range: from 8" to 24" (suggested form 12") Substrate thickness range: min 12 micron (0.5 mil) only PET - max. 250 gr/m² Standard machine voltage: 400 V AC three phase + 50 Hz + Earth - Automatic tension unwinder, for rolls up to 1000 mm(40") diameter,with integrated roll pick up from the floor - Servo driven infeed section,with automatic web tension control - Web guide - DUAL SERVO flexo printing stations with chilled impression cylinder for straight through short web path - Automatic pre-register 360° - Outfeed and rewinding section wi ...
JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...
Key data: 320 mm, 500 mm, 3800 1/min
OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...
grinding wheel diameter: 315 mm grinding wheel width: 40 no. of working stations: 2 Stück speeds: 1745 U/min voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 230 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,05 m S/N: 48817 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...
REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.
dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...
Airport Slopes Runway Runway Winter Service - Spreaders Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" litter body, solids and brine tanks. Contents: gritting agent 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in steps of 1 m Propulsion: Hatz 3M41 diesel engine Operation control by remote control with additional motor remote start/stop and motor monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, NATO towing eye 76 mm! Built in 2002. Hardly used, hardly any corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service technology in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscap ...
Euro supports eco 350 - new Steel prop, galvanized • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight, 17.60kg • Reliable to use due to consistently high load capacity of at least 20kN according to EN 1065 • Easy height adjustment through hole numbering Europrop eco 350, new construction prop made of steel, galvanized - effortless loosening of the adjusting nut due to special thread geometry - less effort required due to low weight, 17.60kg - safe to use thanks to consistently high load-bearing capacity of at least 20kNto EN 1065 - - easy height adjustment thanks to hole numbering
Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters
BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height
NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...
Specifications: - Three-jaw chuck 300 mm - Chuck manually rotatable 360° - Division grid 24 - Peak height approx. 185 mm - Duchgang / passage 55 mm - Total depth without baking approx. 270 mm - Total depth with jaws approx. 310 mm - Flange plate horizontal W 300 x D 145 mm - Flange plate vertical W 300 x H 335 mm - Weight 100 Kg - Space requirement W 320 x D 310 x H 335 mm
Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...
New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
Nederman 30S Industrial Vacuum Cleaner – Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nederman 30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial use. Specifications: • Model: 30S • Year of construction: 2015 • Voltage: 400 V / 3 phases • Power: 3.0 KW, 400 V, 50 Hz, 2800 rpm, 3 phases, 6.8 A, Iso F, S1, IP55 • Container volume: approx. 50 litres • Negative pressure -230 mbar, overpressure 245 mbar • Weight: approx. 90 kg • Condition: used, fully functional Scope of delivery: • Nederman 30S vacuum cleaner •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) • Shipping by forwarding agent possible by arrangement • Locati ...
REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm
SMAG C4R 350 June 1999 Spare parts supplied with the machine: 25 new and used air pressure connectors 5 new control buttons 1 box of 12 used relays 1 box of 12 new relays 4 new aluminum sensor holders plus 7 used ones 6 complete used Keyence for cell adjustment 2 new Keyence cell adjustment 11 bags of screws for adjustments and new cell 1 new INA mandrel holder bearing 4 new mandrel bearing holders 9 boxes of new cell wire 2 used wires 10 different new spare control buttons 7 new J559 belts 5 J864 belts 1 used inverter to be repaired 1 used brake system 1 used joystick Machine equipment: 12 slitting knives 9 slitting blade holders Winding shaft: Ø38-Ø40 -Ø76 Maximum mother reel diameter 650mm Maximum diameter of daughter coil: 350mm
Oven ATA Maxi temperature: 300° C Power: 1,5 kW Voltage: 380 V Internal oven dimensions: Depth 500 x W 295 x H 200 mm External dimensions: L 600 x H 560 x Depth 800 mm Weight: approx 80 kg
Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg
Used labeling machine, sleeve applicator with a shrink tunnel made by Clever Machines, model GS 321. New in 2005.
table length: 910 mm table width: 500 mm table height: 350 - 1300 mm weight max. in kg: 350 kg : 950 mm stroke height: 1300 mm weight of the machine ca.: 110 Kg dimensions of the machine ca.: 100 x 550 x 400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bessler - Wood Milling Machine Speed in 18mm Koskisen Grey consisting of a router table (X-axis), a portal (Y-axis), a Z-axis and a base frame filled with polymer concrete. Mechanics set: consisting of profile guides KPF-S 20 incl. carriage. Ball screw, for the Z-axis. Precision racks, with a gearing quality 8. Profile rails for the installation of limit switches. All sub-elements assembled. Machine feet adjustable. Control set: consisting of planetary gears, with a reduction ratio of 1:5 Stepper motors with 9.2NM, 4A. High-performance power amplifiers with 80V each, a 70V power supply and core transformer, completely pre-assembled in the control cabinet. Sensors for each axis. Protective device CE-compliant due to moving suction device. High-frequency spindle with 2.2KW incl. union nut, frequency converter, mains filter, brake resistor, as well as collet set. 21.5 ...
Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores
Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Originates from prominent pharmaceutical manufacturing in Europe. CE Marked. Excellent used condition. Working Description Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. Wide range of cases and products working sizes Case feeding area safe and free from any mechanical movement Fast and easy change over, with digital indicators and quick fixing o ...
saw-blade dia.: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm saw blade turning speeds: 5000 U/min Motor output: 2,0 kW machine weight ab.: 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
