od used for sale

Cylinder head new with valves mounted . We have a lot of recon engines at stock now.Please contact us... MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany info@miw-zeven

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Unused charging equipment for electric forklifts 48 Volt 120 A Processor-controlled BAE Duo loader with electrolytum woe Price on request More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price Varta Hawker Migatronik Still Linde Wagner

colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Brake: 250 V -Dimensions: 450/300/H250 mm -Weight: 53 kg

gear motor, electric motor, three-phase motor -Manufacturer: Weg, gear motor type ODGM 734 -Speed: 94 rpm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Dimensions: 180/160/H390 mm -Weight: 12.8 kg

Gear motor, electric motor, three-phase motor, feed motor -Manufacturer: Weg, gear motor with attachments -Engine: Type ODG 732 T/372 -Power: 0.55 kW -Gearbox: Type ZB 4824 i= 645 -Drive wheel speed: 30 rpm -Dimensions total: 360/250/H350 mm -Weight: 31.1 kg

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

Monsanto ODR 2000 E Rheometer With manual

Manufacturer: Heesemann Druckbalken war noch eigebaut, Type: MFA 6 oder MFA 8 , FREETEXT1: Hubmagnet 6 mm, FREETEXT2: 24 Volt, FREETEXT3: Länge 1470 mm, FREETEXT4: Bauhöhe 200 mm,

A complete laser processing and marking system SIC-Marking is available. Stations: 3, table type: vacuum clamping table, processing area per station X/Y: 1000mm/1600mm, laser wavelength: 10600nm/1064nm, processes: evaporation/cleaning/structuring/surface processing, overall system dimensions X/Y/Z: approx. 25000mm/3000mm/3000mm, operating hours: approx. 2000h. Station 1: laser type: Synrad CO2 laser, number of lasers: 6, laser power: 100W, pulse frequency range: 0kHz-100kHz, power density: 250kW/cm², processed materials: polyamide/PVB/PET, processes: melting/evaporation. Station 2: laser type: IPG fiber laser, number of lasers: 6, laser power: 250W, pulse frequency range: 20kHz-500kHz, power density: 250MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: structuring/melting/evaporation. Station 3: laser type: IPG fiber laser, number of lasers: 3, laser power: 300W, p ...

An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible.

PLC control, connection module for digital electronic modules, terminal module, repeater, adapter Teleservice, TS adapter, connector, Profibus connector, bus connector, Profibus connector, bus connector -Manufacturer: VIPA, Profibus plug orig -Type: 972-ODP10 -Number: 1x Profibus connector available -Price per piece -Cardboard dimensions: 80/55/H30 mm -Weight: 0.1 kg/pc.

PLC controller, connection module for digital electronic modules, terminal module, repeater, teleservice adapter, TS adapter, connector, Profibus connector, bus connector, Profibus connector, bus plug, Profibus plug -Manufacturer: VIPA, Profibus connector, original packaging -Type: 972-ODP30 -Quantity: 1x Profibus connector available -Cardboard dimensions: 80/55/H30 mm -Weight: 0.1 kg

Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar -Clamping: with lashing strap -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece

A total of six Franz Wölfer three-phase asynchronous motors for converter operation are available. 1) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: right, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 2) Franz Wölfer ODRK 225L-4bT, year of manufacture: 2021, moment of inertia: 0.57kgm², rated power: 190kW, power factor: 0.94, rated speed: 3500rpm, duty type 40%: S3, weight: approx. 510kg. Including encoder POG 10. 3) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: left, weight: approx. 2190kg. Including second shaft end for emergency dri ...

Oddy Novatek 2 Pocket Bread Dough roller and moulding machine, comes as 1 with a top weight dividing machine head and the bottom rolling and pinning machine attachment, 2 sets of weight blocks 65g-150g, 3 Drums, selling due to a change in our operation.

Offer 26142 Hydr.- Horizontal - Mitre Band Saw Machine Technical data: - Cutting range at 90° around 350 mm - flat 320 x 460 mm - Mitre adjustable 90 to 30 ° - Cutting range at 45° around 280 mm - flat 350 x 280 mm - Cutting range at 45° around 180 mm - Material replenishment machine - Material support height approx. 740 mm - Saw blade dimensions 4350 x 34 x 1.1 mm - Adjustable cutting speed 25 to 90 m/min - hydr. Lifting – lowering the saw frame - Cutting pressure infinitely adjustable - Material vise - 3 roller conveyors 1400 mm - 1 piece of rolling trestle - Total drive power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Model SP17-5 and SP17-4 in stock, data SP17-5: 3 kw, 3x 380-400-415V, useful frequency: 50 hz, 33 kg, product number: 99284892, pressure port connection: RP2 1/2, pump speed 2900 rpm, nominal volume flow: 17 m³ / h, nominal head: 40 m, number of stages 5, maximum medium temperature: 40° C,