norma used for sale

Max. size of processed sheet (without interception) - 1,250 x 2,500 mm (without repositioning) - 1,250 x 5,000 mm (with interception) Processed sheet thickness 0.5 - 3.2 (6.4) mm Maximum sheet weight – 50 kg (F1 mode) - 150 kg (F4 mode) X-axis travel – 2,500 +/- 10 mm Y-axis travel – 1,270 +/- 10 mm Maximum travel speed: X axis - 100 m/min Y axis - 80 m/min Max. diagonal speed of movement along the X and Y axes - 128 m/min Max. rotation speed of the rotary (index) tool - 60 rpm Drives (motors) for feeds along the X-Y axes, Yaskawa (Japan) Accuracy when punching holes according to the Manufacturers test: Max. deviation of hole positions along the X and Y axes - +/- 0.1 mm Max. hole center distance deviation along the X and Y axes - ± 0.05 mm Max. angular deflection of rotary (index) tool, max. - ± 0.1 deg. Punching force - 200 kN ...

travel -x axis: 6.000 mm travel -y axis: 1.000 mm travel -z axis: 800 mm control: Heidenhain - iTNC530 distance vertical spindle / table: 1.000 mm table-size: 3.300 x 1.050 mm number of T-slots: 7 T-slot - width: 125 Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

Condensing Steam Turbine Peter Brotherhood Ltd. (England) Power Output – 3500 kW Normal Running Speed – 7035 RPM Trip Speed – 7739/8090 RPM Steam Inlet Pressure – 40 bar G Steam Inlet Temperature – 480° C Exhaust Pressure - 0.10 bar A

Description: Serial number: B64T-91203109AB Operating voltage: 400 V Frequency: 50 Hz Control unit: ULTIMAX Tool holder: SK 40 Travel distances: X: 1625 mm Y: 860 mm Z: 760 mm Spindle nose to clamping table: 150 - 910 mm Table clamping surface: 1675 x 890 mm T-slot in the table: 7 Clamping groove width: 18 mm Groove spacing: 125 mm Max. table load: 1800 kg Feed speed in X-, Y- and Z-axis: 3 - 11400 mm/min Speed range: 80 - 8000 rpm Tool diameter with full occupancy of the tool changer: 80 mm Max. tool weight: 7 kg Max. tool length: 300 mm Resolution of measuring system inside the control unit: 0.0005 mm Measuring system: 0.001 mm Accuracy: Positioning accuracy travel distances: +/- 0.01 mm Repeatability of travel distances: +/- 0.005 mm The machine is equipped with a 24-position tool changer Attention: the machine can be driven on a normal truck up to 3000 mm transport width weight appro ...

Description: Carrying capacity: 5000 kg Incl. runway Track dimensions: approx. 17000 mm Dimensions of the bridge: approx. 12000 mm Attention: the bridge crane can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 17,000 x 12,000 x 5,000 mm, weight approx.: 5,000 kg

Description: Consisting of workshop shelves with various articles such as pins, dowel pins, mudguard washers, screws, nuts, Allen screws and other workshop supplies Attention: the articles can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 5,000 x 4,000 x 1,900 mm, weight approx.: 1,500 kg

Description: Consisting of a server cabinet, various workshop shelves with contents consisting of disc dowels, metal dowels, various abrasives such as sanding belts, disc sanders, drum sanders Attention: the articles can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 5,000 x 4,000 x 1,900 mm, weight approx.: 500 kg

x-travel: 500 mm y-travel: 240 mm z-travel: 530 mm Control: SIEMENS 802S base line table-size: 750 x 210 mm spindle taper: ER32 throat: 260 mm spindle turning speed range: 150 - 8.600 U/min feed speeds: 2.000 mm/min total power requirement: 3,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,9 x 1x2 x 1,9 m Machine comes from a university and was used sporadically. including vice including electric Handwheel including work light including coolant pump including machine feet including central lubrication Stable CNC milling machines with professional Siemens 802 S baseline control, ideal for users in mold making Ball screw spindle from HIWIN in all axes Solid, precise cross table, large dimensions and precisely surface-machined. Heavy, solid cast design Adjustable wedge strips Very wide speed range Continuously variable drive Electronic handwheel reduces setup time to  ...

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 220-240 Volt / 50/60 Hz /1 A Year of construction: 2016 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original Bizerba knife sharpener with normal carriage for sausage or cheese Luminous flux / 230V Schuko plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call. 03423-706493

Used vertical packaging machine made by Velteko model HSV 101S1. New 2002. The machine is equipped with auger dispenser and a date dispenser + receiving conveyor + PRISMA 08D3 checkweigher. TECHNICAL PARAMETERS: The HSV 101S machine is designed for packing loose and small goods into bags, which the machine forms from a roll of packing material. The machine is designed for normal working environment protected from the influence of atmospheric agents with temperature regulation (-5 to +40°C) -AB5, AC1, AD1, AE1, BA4, BOI, BE1, CA1, CD1 - according to HD CENELEC 384.3 S 1 The parts of the machine coming into contact with foodstuffs are made of stainless steel (17 240 Cr-Ni) suitable for contact with foodstuffs. The capacity of the machine depends on the grade of packaging material, the goods being packed, and the capacity of the dispenser. - Performance of the machine (layered  ...

Manufacturer: GEA Westfalia separator Model : ca 220-110 Year : 1985 - 2004 Type : Gas-tight centrifuge / decanter, for operation under normal atmospheric pressure : low cone bowl.   Atex : (Ex) d3nG4 Electrical cabinet : year 2004 Danfoss frequency controller (prod + CIP use) Automatic lubrication Hydraulic flow: 7,000 litres/h Bowl diameter: 220 mm Bowl length to diameter ratio L/D: 2.65 Bowl rotation speed: maximum 5,500 min-1 Centrifugal acceleration z: maximum 3,700 g Bowl moment of inertia GD2: 1.0 kg/m2 ADF motor power: 11 KW Motor speed: 3,000 rpm Net weight of machine (without motor and accessories): 650kg

Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw Tamping screw Compaction zone with pressure rollers Granulation area with star rotor and screen Force: 1 - 20 KN/cm Gap width: 1.0 - 6.0 mm Pressure roller speed: 1 - 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 - 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical and safety control cabinet not available . These elements can be quoted separately.

Description: Serial number: 20510020 Working hours according to the counter: 4139 Working table: 3050x1526 mm , CNC Control LC20 Travels: , X-axis: 3050 mm Y-axis: 1526 mm Cutting capacity: , Normal steel ST 44: 20 mm Stainless steel (1.4301) with N2: 12 mm Aluminium 5052: 10 mm Cutting speed: 0-30 m/min Traverse speed: , X-axis: 85 m/min , Y-axis: 85 m/min Z-axis: 60m/min Installed power: 71 kva Installed chiller power: 25kva Automatic pallet changeover: , Max. sheet size: 3000x1500 mm , Max. plate weight: 730 kg Standard pallet changeover No. of pallets 2 (2007) Pallet changeover time 15sec Resonator: , Model 40CFX , Max. continuous power: hp 4000watt Peak Power: 5000watt Polishing Frequency: 5-3000 hz The machine was working till february 2024,  ,was dismantled by AMADA and now is stored laser capacity: 4 k ...

Description: Consisting of approx. 92 pieces Partly shrink-wrapped, partly normal Stored in a transport trolley Approx. Onsite Dimension. (l x w x h): 1,000 x 650 x 1,100 mm, weight approx.: 200 kg

Description: Operating voltage: 400 V Frequency: 50 Hz Rated current: 16 A Pneumatic connection: 120 mm Air connection: min. 5 max. 7 bar Control unit: SOYER MA-400S Travel distances: X: 800 mm Y: 750 mm Z: 150 mm The machine is equipped with 3 vibration pots from the manufacturer SOYER (type: UVR-300) and 4 stud welding machines also from the manufacturer SOYER (type: BMS-10P) Technical data of the stud welding machine: Standard gun, PS-3 stud welding gun Power source: capacitor battery Charging capacity: 88000 müF Charging voltage: 60 - 200 V continuously adjustable Welding time: 0.001 - 0.003 s Welding sequence: up to 30 studs/min Also various suitable machine accessories and spare parts and documentation Note : the machine ran perfectly until it was dismantled, the first pictures show the machine still in the assembled state. Further pictures can be seen in disassembled condition w ...

Description: serial number 100463017 capacity 0.8 liter 3 ultrasonic modes: normal, sweep, degas. Approx. Onsite Dimension. (l x w x h): 200 x 100 x 170 mm, weight approx.: 2 kg

Cylindrical Cone Fermenting Tanks CCT 8 x 150hl Cylindrical cone fermenting tanks (CCT) with net capacity 150hl. Tanks are vertical indoor type with 80 mm PU insulation, self-standing on four legs, with three (glycol) cooling zones, two on the side + one in cone. Tanks have cooling control system for each tank and each zone separately, sampling valve on outside on tank skirt, two CIP panels which are connected to tanks, inside tank rotating CIP ball and normal under pressure and overpressure safety valves on top of thanks. Generally, tanks are in good condition, and they have a high hygienic level. These CCTs have a dedicated chiller made by made by Italian Rhoss S.P.A in year 2015. Compressor is a scroll type, rotary, hermetic and with Inverter actuation (1+i) complete with thermal protection and casing heater. Cooling refrigerant is Freon R410R. Chiller is air cooled by two axial f ...

General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: � ...

Key data: 680 mm, 635 mm, 5000 1/min

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 420 is in very good mechanical condition, running in prototype construction with light and small machining (9981 spindle hours). The machine can be viewed in our warehouse under power, probably from the end of May Accessories Machine: - Control SIEMENS 840D Powerline with SHOP TURN - Suction (see picture) -Conveyor - Driven tools and tool holders (used) - 1 cheek lining - 1 collet chuck - Parts catcher with outfeed conveyor - C-axis, X-axis, Z-axis and Y-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 10 swivel holders - 8 pcs. normal angle holders - 6 driven tools (3 brackets and 3 front holders)

Description: Natural gas feeder Efficiency 9.9 kWh/m³ Consumption 35 m³/h Maximum temperature 800°C Maximum coil weight 3 tons Maximum coil diameter 1400 mm Maximum coil height 2000 mm Power 350 kW PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 2 exceptional transports 2 normal trucks Approx. Onsite Dimension. (l x w x h): 12,000 x 6,000 x 4,000 mm, weight approx.: 25,000 kg

automatic switch plate 1x saw unit with saw, head and saw valve 40/80 1x turning unit with turning valve 30/60 with flange 9x units 30/60 with valve normal and flanges 5x units 20/50 with valve normal and flanges 1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500; 1x hydraulic unit 1 Knoll oil filter Without collets and ejectors, without platform and without tool monitoring. supplied tooling may differ from the pictures. We can send you more pictures. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

- fast, reliable, non-contact ink jet printer designed to provide versatile, uninterrupted operation in factory environments. - used to apply sell-by dates, batch codes, logos and other variable information to a wide range of substrates on the production line using ‘continuous ink jet’ printing technology.  - printhead is attached to the rear of the printer cabinet by a flexible conduit. - during operation, the printer is located adjacent to a production line to allow printing onto the product as it passes the printhead. - a product sensor (such as a photocell) is normally used to detect the presence of the product and synchronize printing. - suitable for bottles, eggs, cartons, boxes - easy to use, settings for several products can be saved - thickness, font, inclination, etc. of the letters or numbers can be set on the machine More then 300 machines new and second hand on our seem ...

internal diameter:250 mm swing diameter:455 mm workpiece length - max.:1200 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 mm CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:250 (selbstschließend), 1 Satz harte Backen, 1 Satz weiche Backen, 1 Satz Innen mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:RPM 28.000, diam. 60 mm. Min. diam. cap. 25 mm. x Bohrung 50 mm, Max. diam. cap. 100 mm. x Bohrung 115 mm . internal grinding spindle: ...

internal diameter:300 mm swing diameter:300/350 mm workpiece length - max.:2300 mm table rotating:-2/+6 ° table speeds:0-4000 mm/min max. workpiece weight:400 (fliegend, 150mm von der Spindelnase) kg workhead - center taper:6 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:11 kW coolant pump:2,2 kW CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:350 (selbst zentrierend) mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:auf Anfrage internal grinding spindle:auf Anfrage fixed steady rests:10-100 mm, 100-170 mm PERFORMANCE AND PRECISION DEGREE Robbi grinding machines are according to the international precision normes ...

Including accessories, cutting head, welding head 150mm, setting master for cutting head and welding head, communication interface external periphery, automatic front door with servo motor, support frame, the right side door has an opening for pipe processing, this must be closed with a sheet of metal on both sides, battery from the PC must be replaced, the software must be reset for normal operation, with Laser Trumpf TruDisk 3302, laser power: 3300W, connected load: 20kVA, weight: 850kg and Cooling Device KLH RL 16/0 SK IEC.