norma used for sale

Screw clamps, pipe clamps, pipe fastening, Hose clamps -Manufacturer: Stedo 7 Norma, hose clamps 25 pieces/ box -Clamping diameter: 110 to 130 mm -Band width: 12mm -Material: steel, galvanized -Number: 4 boxes available -Price: per box -Dimensions cardboard: 325/275/H100 mm -Weight: 1.7 kg/box.

Inlet size: 700 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

Electric motor, three-phase motor -Manufacturer: Normacem TODAY 125 ar6 -Power: 2.6 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Dimensions: 420/275/H330 mm -Weight: 49 kg

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inside: Ø 60.3 mm -From: 59.5 to: 61.0 mm -Pressure: 16 bar -Price: per piece -Number: 10x available -Dimensions: 85/95/H78 mm -Weight: 0.6 kg/piece

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inside: Ø 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14x available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece

2 pieces used MOBILE CEMENT SILO Brand: NORMANN BOCK Type: WS-22,5 YEAR: 1994 Volume: 22m3 Immediate available location: Wittenberg/Germany price on request offer and all price are net and ex stock, without guarantee and/or guarantee, mistakes and/or false representations reserve, subject prior sale selling in current state / how is it – standing or recumbent,

General SKU254S218 LocationBarneveld MakeNormag Labor und Prozesstechnik GmbH (D) TypeMSB DN70/50 Mixer-settler No.A 1601412 Year of construction2017 Main Features MaterialGlass Volume40 Ltr. Specified Features - Varias mezcladoras MaterialGlass Capacity4x 10 Ltr. Information Total height1,6 M Weight240 Kg CEcheck Floor space1,3x1,3 M Extra SpecificationsThis is a laboratory test set-up for aqueous solutions. Consisting of four glass Normag vessels of approximately 10 liters (-1/0.5 bar max 100 degrees C) Thin liquid liquid can be pumped by means of 2 Fink Chem + Tec membrane dosing pumps type R05-120 with a capacity between 0.12 and 120 ml/min. Two double-walled process vessels of approximately 350 ml are placed on top of this skid. These kegs are fed by two speed-controlled pumps / mixers. the whole is mounted in and on a stainless steel frame. This frame is in a pla ...

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

Diaphragm valve set, pneumatically actuated, normally closing PARKER, VERIFLO Normally Closed SD4 - MINI -2534 24XD 4V14-SD4K-15AC-SSV-PP 10 x Valve single 8 x Valve Y-Style 2 x Valve Parker uhp single 4 x Valve Parker uhp Y-Style PST 4 - 7 bar stainless steel Dimensions: 450 x 280 x 100 mm

Hydraulic swivel bending machine make JORNS Norma-Line-125-SH-OP / 2-8Machine -No: 9778-01 built in 1997Technical specifications:Bending length: 8000 mmInsertion depth: 1000 mmmax.sheet thickness steel: 1.25 mmmax.sheet thickness aluminum: 2 mmmax.sheet thickness VA: 0.80 mmmax.operating pressure: 140 barStroke of the upper beam: 200 mmNumber of bending cylinders: 4Drive power: 4.0 kWDimensions: 8500 x 1300 x 1800 mmWeight approx: 4.9 twith- OP 2100 axis control (9 memory locations)- Guide rail with roller shears- 2-pedal foot control- Emergency stop raillittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw Make Pressta Eisele Type Norma LMS D 400 Masch. -No: 222633 Year of construction 1992 Technical specifications Cutting length 4000 mm Saw blade diameter 400 mm Speed 2890 rpm. with - Neig and tiltable - Digital length display Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer: Pressta-Eisele Type: Norma VIS 400 TU/4 Year of construction: 1994 Speed: 2890 rpm

Used flow packing machine FMC type WA120 Super Normal.

Stable shelves, total approx. 1,500 to 1,800 fields, Gemac, without clamping crosses, frame height: 2.48m, shelves: 1.20m x 1.30m, 130kg / level – used - : Construction site price: Price per field ex location: only 95.-€ (net), dismantled, packed and loaded! Price from at least 100 fields: Per field from location: only 85.- € (net), dismantled, packed and loaded! More intermediate floors for an extra charge! We reserve the right to take a minimum order! Manufacturer: Gemac Type: should be Normaflex Year of construction: 2006 Frame height: approx. 2,48m Field depth: 1,20m Field width: approx. 1.31m Shelves: Professional load per floor: 120kg Field load: 850kg Floors per field: 6 incl. lid on which can also be stored The 6 floors / levels consist of 3 large continuous floors and 3 levels consisting of narrower floors (which then also make up a large ...

machine measurements: 1500 x 2400 x 1150 mm machine weight: -- kg power capacity: 12 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 Torque: 200 Nm turning speed range: 1800 U/min drive motor: 3,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 22 kW tool adaptor: ISO 50 Torque: 1000 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 5,5 kW tool adaptor: ISO 40 Torque: 290 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 14,7 kW tool adaptor: ISO 50 Torque: 780 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drive motor: 7,4 kW tool adaptor: ISO 40 turning speed range: 1800 U/min Torque: 400 Nm Technical specifications Bodies arranged at 45° with respect to each other. Maximum transmissible torque from 550 Nm to 3.180 Nm. Maximum speed from 1.800 rpm to 3.000 rpm. Automatic clamping of the tool, driven by a hydro-mechanical system. Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). Spindles and gears are made of case-hardened and tempered chrome-nickel. High-precision angular contact ball bearings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm Minimum quantity spraying device Pneumatic material clamps Miter cuts possible on both sides 2-hand operation

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 26x package available -Price: per package -Weight complete: 15.6 kg/package

Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader,, Quinto Software Version 4.3 b 10 for milling cutters, drills, step drills, profile tools, groove simulation, Kennametal Hertel,, hydraulic workpiece clamping,, automatic Renishaw measuring probe,, automatic fire extinguishing system,, automatic central lubrication,, Glass scales on the linear axes, 1 clamping claw, 1 automatic chuck, 1 collet D:32mm, 2 loader pallets,, 2 grinding wheel holders., X-axis longitudinal movement: 380mm, Y-axis transverse movement: 280 mm, Z-axis vertical movement: 280 mm, C-axis swivel range: 340°, A-axis rotation range: 360 °, Center height: 210 mm, Workpiece holder: ISO 50, Grinding wheel diameter: Max. 200 mm, Drive power grinding lockers: 7,5 kW, Grinding spindle speed: stepless 0 - 9000 rpm, Connected load: 29 kW (400 V / 50 Hz), Dimensions W x ...

saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Saw blade diameter 400 mm Cutting length max. 4000 mm Cutting area flat 140 x 190 mm Speed 2890 rpm Motor power 2.2 kW each Connected power 4.5 kW Machine weight approx. 0.75 t Dimensions LxWxH 5.0 x 1.0 x 1.7 m a pneumatic cylinder must be retrofitted. Approx. Onsite Dimension. (l x w x h): 5,000 x 1,000 x 1,700 mm, weight approx.: 750 kg

Key data: 6000 mm, 1 mm

Hydr. Long bending machine JORNS 6m x 1.25 mm Insertion depth 1000 mm, sheet metal supports 9-fold angle control OP 9 manual and automatic, double-foot switch hydr. Roller Shears approx. 2500 kg

Description: Technical data: Cutting width 150 mm Cutting height 120 mm Saw blade dimensions 350 mm Motor power 4.5 kW Cutting length 4000 mm Speeds 2890 rpm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,200 x 1,650 mm, weight approx.: 650 kg

Center distance: 0 mm Grinding head Z-axis: 280 mm Center height: 0 mm CNC Brand: Fanuc MAKE   Schneeberger TYPE     NORMA CFG YEAR    2007 SPECIFICATIONS Controll    Fanuc Cylindical / Surface / Other   5 Axis Tool grinder Grinding length   C = 340 Gr mm X - Travel    X = 380 mm Y - Travel    Y = 280 mm Z - Travel     Z = 280 mm Electro magnetic table      A = 360 Gr mm Grinding wheel size           HSK 50 - 200 mm mm kW power on spindle        7.5 kW kW Spindle speeds / ranges     9000 Rpm DIMENSIONS Length     2400 mm Width      2400 mm Height     2200 mm Schneeberger Gemini DMR 5 Axis cnc Tool grinder

TECHNICAL SPECIFICATIONS Manufacturer: ADREBA Description: Floating suction dredger Type: Type III Design: Floating on pontoon construction Year of construction: 2000 Excavation depth: 53 m Slurry pump: PK 350-185U Number of mooring winches: 4 pcs. Submersible motor Manufacturer: Marotechniek Unterwasser E-Motor Type: MTOWA-355-4-0691 (400 kW) Jet Pump Manufacturer: IDRECO Type: Norma VdK1 100-250.2 Power/pressure: 77.4 kW / 8 bar BOOSTER PUMP Manufacturer: ANDRITZ Standard Pump Type: ES 100-250.2 Power/pressure: 59.4 kW / 16 bar SPECIFIC COMMENT - Technically very good condition, fully functional - Incl. 20 kV cable with buoys, 300 m - Incl. spare engine (400 kW), Newly overhauled - Incl. spare mooring winch with motor

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

Pivot pin clamp, pipe clamp, 13 pieces NORMA ND156 W2 Pipe diameter: Ø 150 - 162 mm Belt width: 30 mm spanner width clamping screw: 17 mm Material: stainless steel ( AISI 439 ), clamping screw: galvanized steel New ! Dimensions ( single pipe clamp ): 180 x 170 x 30 mm Dimensions ( packaging ): 400 x 200 x 200 mm

Pivot pin clamp, pipe clamp, 7 pieces NORMA ND108 W2 pipe diameter: Ø 104 - 112 mm belt width: 25 mm spanner width clamping screw: 13 mm Material: stainless steel ( AISI 439 ), clamping screw: galvanized steel New ! Dimensions ( single pipe clamp ): 130 x 120 x 25 mm Dimensions ( packaging ): 200 x 140 x 140 mm

TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Y.O.M. 1985, Pneumatic pressure conveying vessel for operating pressure 1 bar with 600 l usable capacity in normal steel., With built-in container scale BW3 for 250 kg/batch, shake, swivel valve, rotary valve DK 4 /200, load cell and ventilation. Without control cabinet.

Material: Normal steel Fan percussion More information and price on request The machine is extensively overhauled and then is as new as new.

Workspace tip height 102 mm centre distance - with normal headstock with 450 mm - reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm spindle poles spindle nose for collets type Schaublin W25 spindle bore 25 mm collets passage 20 mm reduction ratio of 1:5 Raedergetriebes cheek height x width x length 168 x 130 x 1000 mm cheek from cast iron, trapezoidal profile as lathe 102 N and dovetail, hardened and ground. Sledge greatest way on the cheek width 400 mm runner - length 90 mm top runner above 80 194 mm way manual adjustment 20 mm shank of tools 12 x 12 mm cross slide width length 94 300 mm way manual adjustment 100 mm bed slide length of leadership on the cheek 250 mm screw lead screw for longitudinal turning and threading, Ø 40 mm screw hardened, Ground thread, slope 4 mm speed range RPM 270 3000 rpm turning 0.02 0.3 mm / Rev. Tapping largest slope  ...

Band conveyor 14 cm wide - 2.00 m long use as a stack table behind filling arrangements possibly nevertheless, height of the stack level (normally 0.75m) is changeable on 0.95 m. the band conveyor can be put about a Poti in the speed.

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

C33 D5 Enclosed A044B089 Genset Model C33 D5, 33kVA Standby, 30kVA Prime, X3.3G1, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X3.3G1 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144G, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% W ...

C38 D5 Enclosed A044B090 Genset Model C38 D5, 38kVA Standby, 35kVA Prime, X3.3G1, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X3.3G1 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144H, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% W ...

Normal steel, length. 9.00 m, Diameter: 420 mm, outlet: round D = 300 mm Drive: Gear motor 4.0 kW with max. 100 UPM

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

Normal steel Volume: 25 litres, drive: 3 kW

KRONES Canmatic Running direction: left Continuous linear/normal Performance about 40,000 bottles / HR Including format sets for 1.5 liter, 1.0 liter, 50cl. and 33cl PET bottle Spray system by ROBATEC The machine is in good condition and is available from November 2015.

C44 D5 Enclosed A041C003 Genset Model C44 D5, 44kVA Standby, 40kVA Prime, S3.8G4, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire ENGINE S3.8G4 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator UC224C, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical, Flange On Connection Inlet 3 Inch, Outlet  ...

C66 D5 Enclosed A041C011 Genset Model C66 D5, 66kVA Standby, 60kVA Prime, S3.8G7, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire ENGINE S3.8G7 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator UC224F, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical, Flange On Connection Inlet 3 Inch, Outlet  ...