nl used for sale

turning diameter: 420 mm turning length: 3.123 mm control: MORI SEIKI MSX-850III turning dia. over bed: 995 mm swing diameter over slide transversal: 825 mm dist. between centers: 3.200 mm x-travel: 280 mm z-travel: 3.170 mm feeds: X.Z 30.000 mm/min spindle nose: JIS A2-8 turning speeds: 3.000 U/min spindle passage: 105 mm forward bearing diameter: 160 mm spindle drive: 28 kW Torque: 3.365 Nm turret head: pos. 12 tail stock: weg tailstock quill diameter: 150 mm quill stroke: 150 mm tailstock taper MT: MK 5 total power requirement: 54 kVA weight of the machine ca.: 13,5 t dimensions of the machine ca.: 8.147 x 2.58 x 2.390 mm Equipment - Hydraulic 3-jaw chuck Ø 400 mm - Chuck type SCHUNK THW 400-120 - Quick jaw change system for chuck - Hydraulic steady rest SHW type SLU-3.2-ZS - Steady rest capacity 50–200 mm - CNC longitudinal movement of steady rest (A-axis) - Automatic tool me ...

50/60 Hz standalone active noise cancellation system DIGITIMER D400 + NL900D + CED 1401 MICRO3 3701 THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-175

Elegant Christmas mailbox in red lacquered metal with gold finishes. Adorned with the embossed inscription \"SANTA'S MAIL\", it rests on a central stand with a stable base. Auction-ID: A1-51201-138

Cylindrical decorative mailbox, red with snow effect, letter recovery system on the back. Suitable for outdoor Christmas decorations. Auction-ID: A1-51201-135

Cylindrical decorative mailbox, red with snow effect, letter recovery system on the back. Suitable for outdoor Christmas decorations. Auction-ID: A1-51201-136

This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details.

CNC Turning Center manufactured in 2014. This DMG MORI NLX 2500/700 features a maximum turning diameter of 460 mm and a turning length of 795 mm. With a robust machine weight of 4800 kg and a rated power of 25 kVA, it is designed for precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details.

This 3-axis DMG MORI NLX1500MC/500 was manufactured in 2015. It features a spindle output of 11/7.5 kW and a maximum spindle speed of 6,000 min-1. The machine is equipped with a 12-station turret and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX1500MC/500 horizontal turning machine we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NL2500MC was manufactured in 2006, offering robust capabilities for horizontal turning. Ideal for precision machining, this unit ensures reliable performance with its advanced design. If you are looking to get high-quality turning capabilities consider the MORI SEIKI NL2500MC machine we have for sale. Contact us for more information.

This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information.

This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.

This 3-axis MORI SEIKI NLX 2500M was manufactured in 2011. It features a maximum turning diameter of 366 mm and a maximum turning length of 705 mm. The machine is equipped with a powerful spindle motor of 18.5 kW and a turret with 12 positions for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500M horizontal turning machine we have for sale. Contact us for further details.

This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details.

This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details.

Used machine NLX2000SY with loading magazine Machine Type: Turning Center Model No.:NLX2000SY Manufacturer: DMGMORI Control: CELOS Year of construction/IB: 2021/2022 Location:: Germany - Main spindle 15/11 KW - Chuck for main spindle - Automatic path control of the clamping cylinder for the main spindle. - Sub-spindle 11/7.5kw - Chuck for sub-spindle - Automatic path control of the clamping cylinder for the sub-spindle - Double footswitch for HSp and GSp - Coolant shower on lining - Spindle 2 tailstock specification - 20 Station turret - Milling drive for all stations 10,000 min-1 - Direct position measuring system X-Y-Z axis - Y-axis - Chip conveyors - Coolant pump 8bar - Bar feeder IF - Parts catcher conveyor belt for parts - Irco Bar Loading Magazine MUK 7012 III - Workpiece ejector (headstock 2) - Oil separator - Alternating speed - Spindle orientation ...

CNC control, control panel, LCD, keyboard, touchscreens -electronic handwheel -Manufacturer: NEC -Type: NL10276AC30-03L -Type: 150PW072-C -Dimensions: 400/645/H485 mm -Weight: 22 kg

CNC lathe DMG MORI NLX 2500 SY/700 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of manufacture: 10/2017 Commissioning: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 4500 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Workpiece Conveyors , Workpiece Unloaders Tool presetter manual ( HS ) Removable tool presetter ( GS ) 3 Jaw Chuck Hydraulic Kitagawa BB 210 with Foot Pedal (HS) 3 jaw chuck hydraulic Kitagawa B 208 with foot pedal (GS) IRCO BREUNING ILS Bar Feeder - muk Various tool holders 0 40 mm Direct displacement measuring system X, Y, Z axis Signal lamp 4 ...

Manufacturer MORI SEIKI Model NL3000/3000 Year 2.008 CNC MORI SEIKI MSX-850III Capabilities and advances Max. turning on bed 995 mm. Max. turning on transverse carriage 825 mm. Maximum turnable diameter 420 mm Maximum turnable length 3,123 mm. Distance between points 3,200 mm. X-axis travels 280 Z-axis travel 3,170 mm. Fast Forward X-Axis, Z 30.0000 mm/min Head Nose head JIS A2-8 Maximum head speed 3,000 rpm Rod pitch head 105 mm. Axle diameter in the front bearing 160 mm. Main motor power 28 kW Maximum torque 3,365 Nm Turret No. Turret 12 Positions Maximum square tool size 25 mm Bored bar diameter 50 mm. Turret indexing time 0.3 s Counterpoint Tailstock travel 3,164 mm Tailstock shank diameter 150 mm Tailstock shaft course 150 mm MT5 tailstock cone Equipment 3 Claws Hydraulic Plate Ø 400 mm INCLUDED Chainring type SCHUNK THW 400-120 Quick C ...

DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

Key data: 260 mm, 500 mm

Turning-milling centre Manufacturer: Mori Seiki Type NL1500SY/500 Year of construction 2007 In operation 03/2008 Control MSX-850-III Y and C axis All 12 turret stations are powered Max. turning length 500mm max. turning diameter 260mm Spindle Passage 50mm Speed of the driven tools 6,000 rpm Feeds X Z B 30,000 Y 10,000 with LNS rod loading magazine, length 1000mm, max D 65mm reducer sleeves. Machine is sold with all accessories, steel holders, AGWs (all still very good) collets, chuck, pick-up chuck, documentation, extraction system. Machine only ran in single-shift operation.

Key data: 254 mm, 700 mm

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

Manufacturer: FEHRER Model: NL9/S Year of Manufacture: 1991 Specifications: - Stroke: 60mm / max. 1,200 RPM - Needles: 1x 3,000 N/m - Working width: max. 2,600 mm Including: - Control Panel - Control Cabinet Find more here - .ucymachines/ Contact us at - sales@ucymachines

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Year of construction 2023 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 5000h Machine running time approx. 11,000h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmMax. Turning Length192 mmSwing- Ø, max.755 mmBar diameter max.52 mmSpeed max.6000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle11/15/15 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p High-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmMax. Turning Length705 mmSpindle bore111 mmBar diameter max.102 mmSpeed max.2500 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/795 mmRapid feed X / Z30/30 m/minDrive power main spindle22/18,5 kWDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p Left Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 ad ...

These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler

With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...

CNC Control: Mitsubishi M-720BM(MAPPS 3) Upper turret Tool holder: 12 Main spindle Max. spindle speed rpm: 4000 Spindle drive power kW: 18.5/15 Spindle bore mm: 91 Manufacturer: KITAGAWA Sub-spindle Spindle motor: 6000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Manufacturer: KITAGAWA Equipment Conveyor Signal lamp Tool measuring arm High Pressure Pump Workspace light Common Variables for Custom Macros (100) Year of construction: 2011

Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...

Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6020 mm, 1 mm

used hydraulic Jorns long bending machine, with 5 wide stand units, with SN 1.25 motor scissors, bending beam width 16mm, with emergency/stop rail, foot switch, Control on the swivel bracket OP, with resettable sheet metal supports in the lower beam Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Projection 1000 mm Total power requirement 16 A Dimensions approx. 6800 x 1650 mm Weight 3200 kg Upper beam stroke (opening width) 200 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Color: Blue Machine number 9453-07

Key data: 6020 mm, 1 mm

with motorized scissors, with CNC depth stop, with 4-stop finger (tilt-turn finger), with 5 stand units, the machine is located in good and well-maintained condition Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Back gauge (max.) 1000 mm Color: Blue Total power requirement 16 A Dimensions 6900 x 1580 x 1870 mm Weight 3000 kg Upper beam stroke (opening width) 200 mm Sheet thickness adjustment yes, manual Bending angle (max) 140 degrees Roller shears yes, motorized Number of stands 5 pieces Machine number 9538-10

Mori Seiki NL2500Y/700 CNC Drehmaschine (02/2008) Hersteller: Mori Seiki Typ: NL2500Y/700 Baujahr: 02/2008 Zustand: gebraucht, sehr gut, in Produktion Drehdurchmesser 275 mm Drehlänge 705 mm Steuerung MAPPS II MSX 850 Umlaufdurchmesser über Bett 923,8 mm Umlaufdurchmesser über Planschlitten 755 mm max. Drehdurchmesser 356 mm max. Stangendurchmesser 80 mm Hauptspindel Drehzahlbereich ? Hauptspindel 4.000 U/min Antriebsleistung ? Hauptspindel 26 / 22 kW Spindelnase JIS A2-8 Spindelbohrung 91 mm Spindellagerdurchmesser 140 mm C-Achse 0,001 ° Verfahrweg x-Achse 260 mm z-Achse 795 mm y-Achse 100 (+/- 50) mm Revolver Werkzeugplätze 12 Pos. Schafthöhe für Vierkantwerkzeug 25 mm Schaftdurchmesser für Bohrstange max. 50 mm Revolverschaltzeit 0,25 sec. Drehzahlbereich der angetr. Werkzeuge 6.000 min -1 Antriebsleistung ? angetr. Werkzeuge 5,5 / 3,7 kW Vorschub ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length705 mmSpindle bore111 mmBar diameter max.80 mmSpeed max.4000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/795 mmRapid feed X / Z30/30 m/minDrive power main spindle18,5/15 kWDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mWeight approx.6360 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 18.5/18.5/15 kW, 4,000min-1(Spindle 1) Standard Spindle 18.5/18.5/15 kW, 4,000 min-1 Max. spindle speed: 4,000 min-1 Chuck size: 10 inch., 12 inch. (8 inch. also for the 2-a ...

Key data: 6020 mm, 1 mm

used 6-meter Jorns swivel bending machine, foot switch, emergency stop rail, 9-fold bend angle control, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length 6020 Sheet thickness max. steel 1.25 Sheet thickness max. aluminium 2.00 Sheet thickness max. VA 0.80 Projection 1000 Color: Blue Total power requirement 16 A Dimensions 6800 x 1650 x 1700 mm Weight 2350 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Roller scissors yes Number of stands 4 pieces Backgauge (min.) without Insertion depth 1000 mm Machine number 9931-07

Key data: 6020 mm, 1 mm

Used hydr. Jorns bending machine, hydr. Roller shears, emergency stop rail, Control 9-bend angle, foot switch, slide-back sheet metal supports Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Blechdicke Stahl/sheet thickness steel 1,25 mm Blechdicke Alu/sheet thickness Aluminium 2.00 mm Blechdicke VA/sheet thickness Stainless 0.80 mm Backgauge (max.)/Backgage without Auslauf/throat depth 1000 mm Farbe/Colour blau Maschinennummer/machine number 9453-04 Total power requirement/electric power 16 A Space requirement approx. 6800 x 1650 mm Einlegetiefe/insert depth 1000 mm Maschinengewicht/Weight 3200 kg Oberbolenhub/upper beam stroke 200 mm Roller shear/roller shear yes Number of columns: 5 pieces Öffnungsweite/opening width 200 mm Bending angle (max)/bending angle 140 degrees

GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...

\" Baykal BLE PRO 1530 CNC Fiber Laser Cutting Machine Manufacturer: Baykal Makina San. Tic. A.Ş. Model: BLE PRO 1530 Machine type: CNC Fiber Laser Cutting Machine Manufacturing date: 08/2020 Serial number: 26021 Laser source: nLIGHT Fiber Laser, 1 kW Cutting head: Precitec Laser classification: Class 4 Working hours: Approx. 250 h Enclosed industrial fiber laser cutting machine designed for precision sheet-metal cutting. Equipped with a 1 kW nLIGHT laser source and Precitec cutting head. Lantek CAD/CAM nesting software is included. Technical specifications: Laser output power: 1 kW Cutting table: 1,524 × 3,048 mm Nominal electrical power: 10.9 kW Electrical supply: 400 V / 50 Hz / 3-phase Air pressure: 6 bar Oil tank capacity: 60 L Dimensions (L × W × H): 9,000 × 2,300 × 2,200 mm Machine weight: 9,500 kg Included equipment: nLIGHT 1 kW fiber la ...

NUKON EXTREME LASER 25180 12kW fiber laser was built in 2021 in Turkey by NUKON Laser Cutting Machines Co. The machine is designed for precision cutting of large-format sheet metal with maximum dimensions of 12000 x 2500 mm. Thanks to the use of many state-of-the-art technical solutions, it is perfect for both unit and series production, guaranteeing high quality and repeatability of the manufactured parts. The NUKON EXTREME LASER 25180 performs 5-axis laser cutting with the NLCH cutting head, designed for demanding industrial environments. A number of unique features are incorporated inside the aluminium body to ensure the head meets and surpasses current industry standards. The focusing system used, together with the high-end optical system, enables accurate cutting of even very thin workpieces while maintaining high edge quality. In addition, the high energy efficiency optimises en ...

Electronic Components Drilling Rig StankoImport Stanko-Import 2A622/1600 Electronic components from a Stanko Import drilling rig How 3-pulse thyristor amplifier Bosch Siemens Sikostart Bosch PC200 ZE with Bosch Eprom Bosch PC200 E24V Input Bosch PC200 AR/2A Output Bosch PC200 NT5V Gvvrsw Murrelektronik Type NLS 100-220/24 Uprim 110/220 Upc 24V= Mat.Nr. 031447-102401 Mat.Nr. 031447-102303

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Vacuum deaerator Manufacturer: Fryma Type: VE 3 Machine no.: F 703419 very good condition Netzsch pump NL50A Vacuum pump Dimensions LWH: 2800 x 1250 x 2250 mm Weight: approx. 1000 kg

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

gas flow meter KOBOLD MAS-3008-C2 NLPM for nitrogen 24 VDC Dimensions: 140 x 130 x 40 mm

Universal Filling Device Fritsch UFG-EPA-08RHG-NL20 Year of Make: 2008

Description ELKALUB GLG 16/N000 is a lithium-saponified fluid grease with good oxidation resistance and excellent sliding friction behavior. The high load-carrying capacity enables the permanent lubrication of highly loaded gearboxes. ELKALUB GLG 16/N000 can be easily conveyed in central lubrication systems. A typical application of ELKALUB GLG 16/N000 are central lubrication systems of construction machinery or large sheetfed offset printing presses. Base Oil Mineral Oil Thickener Lithium Base Oil Viscosity 145 mm²/s Operating Temperature -20 C to 100 C NLGI Class 000 Machine Element Gearbox Industry Pressure