netz used for sale

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.

Excenter screw pump Manufacturer: Netzsch Type: NM0453H02812H N°: 319224 Built: 2000 Power: 3.0 kW very good condition speed-controlled various spare parts LWH: 1800 x 500 x 600 mm

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY02512B Machine number: 409232 Year of manufacture: 2009 Output: 200-300-350 l / h Pressure: 4-6-8 bar Motor: Lenze Speed: 1410 RPM. Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready for operation (new stator)

Excenter screw pump Manufacturer: Netzsch Type: NM053BH02S12H Item #: 330886 Year of construction: 2001 Power: 3.0 kW Speed: 1400 rpm very good condition with spare parts LWH: 1800 x 270 x 300 mm

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY Machine number: 321637 Year of construction: 2001 Power: 90-1500 l / h Speed: 24-400 rpm. Pressure: 0-16 BAR Motor: 1,5 kW, 400 V North, Connection suction side: DN 70 Port side: DN 70 Length: 1700 mm Condition: used, ready

Excenter screw pump Manufacturer: Netzsch Type: NMNL50871184 Power: 2.2 kW with spare parts very good condition LWH: 2000 x 500 x 400 mm

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 30B Machine number: 235197 Year of construction: 1992 Power: 0.2-1.4 m3/h Pressure: 0-6 BAR Motor: Stöber 1.1 kW, 400 V Inlet connection: DN 50 Port side: DN 50 Length: 1500 mm Miscellaneous: electrical Verstellgetrieb with ventilation Condition: used, ready

Excenter screw pumps Manufacturer: Netzsch Type: 1) NM NE 40A - 595 376 2) NM NE 40A - 869 334 Power: 3.7 kW / 4.4 kW speed-controlled Speed: 1420/2860 rpm very good condition LWH: 2000 x 400 x 450 mm two items in stock

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Type: 2NL20A Year: 1979 Capacity: 205 l /min Motor: 0,75 kW Working pressure: 19 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1530 mm Width: 420 mm Height: 1050 mm

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Year: 1979 Capacity: 25 l /min Motor: 0,75 kW Working pressure: 13 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg

Year: 1979 Capacity: 20 l /min Motor: 0,75 kW Working pressure: 19 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg

Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C87 TE1PV/Stage 3A Engine No.: in production Power: 259 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L1D D41 Gene. No.: C221374934 Generator power: 310 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation IG 500 Switch: Generator switch 4 poles with motor drive Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NMO45BY04S18B Year of construction: 2007 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h operating pressure: 16 bar Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request

Name: Netzsch Nemo pump used Manufacturer: Netzsch Type: NM031BY04S24B Year of construction: 2006 Material: Normal steel Drive motor: 3 kW operating temperature: 20 C Dimensions: L 1700 x W 300 x H 500mm Empty weight: 150 kg Speed: 79-262-719 rpm Flow rate: 0.2 - 1-3 m3/h Operating voltage: 400 / 690 V Protection class: 55 Flanges: DN 65 Condition: Used Tech. Documentation: No Price: On request

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Machine name: Macerator Manufacturer: Netzsch Type: NBI200 Year of Make: 2001 Speed: 1440 rpm Contents: Steel Drive motor: 5.5 kW Dimensions: L 470 x W 660 x H 1,270 mm Curb weight: 150 kg

Mohno pump, progressing cavity pump Netzsch NL 30 A, for the promotion of various media from the food sector, Pipe connection size DN50, El. Connection 400V, 1.1 kW; Year of manufacture 1991 Dimensions LxWxH approx. 153x40x90cm, weight approx. 115kg, used, functional

Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

Sigma mixer with a gross trough volume of 8 l., drive via Bauer gear motor with 1.1 kW, trough manually tiltable for emptying. Parts in contact with the product made of stainless steel. Very good condition.

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

General SKU323T842 MakeNetzsch TypeLME 60 LocationBarneveld Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor55 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 ltr Housing dimensions Dia 410x1100 mm InletDia: 25 mm OutletDia: 60 mm With mechanical sealcheck With jacketcheck Motor55kW, 380 Volt, 1480 rpm (EX) Without ballscheck MaterialMild steel, Stainless steel With jacketcheck General No.204768 Year of construction1980 Mounted on framecheck With switch(as is) Floorspace2,35x1,6 mtr Total height2,3 mtr Weight2500 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand mills ...

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4