We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,436 used machines on RESALE, but how to find them? Machine Search
used
Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,
used
Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,
used
Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm
used
used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to
used
used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to
used
used, kpl. 1 year warranty, built in 1994, plate size 800x800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 5500 x 1500 x 2200 mm, weight approx. 6 to
used
used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, capacity 75 liters, filter area 6.5 m2, pressure max. 10 bar, dimensions 2000 x 800 x 1600 mm, weight approx. 800 kg
used
Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
used, kpl. 1 year warranty, plate size 250 x 250 mm, 15 plates, open outlet, 15 mm cake thickness, pressure max. 15 bar, capacity 10 liters, filter area 1.5 m2, dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feeding pump and Piping
used
Chamber filter pressing rack Netzsch uses benefit length: 3,500 mms record transport unilaterally not available the machine served as a spare part bearer, is entire incl. wheel tins.
used
Year of construction: 1992
used
used chamber filter press / filter press Netzsch 1200 x 1200 record size: 1200x1200mm cake thickness: 30 mms benefit length: 8,200 mms chamber number: 120piece filter pressure: 15 bars record transport: at the side automatically
used
Used eccentric screw pump Type: NM090SY02S12B Machine number: 355339 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages
used
Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
used membrane chamber filter press / filter press Netzsch 800 x 800 mix parcels record size: 800x800 mms cake thickness: 32 mms benefit length: 4,768 mms filter surface: 34m? filter pressure: 15 bars record transport: automatically the arrangement is in a very good state.
used
Used eccentric screw pump Netzsch Type: NM090SY02S12B Machine number: 355338 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages
used
Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...
used
Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft
used
Type: NL 20 A Com.: 70 50 17 02 MaschNr.: 271872 Year of construction: 1996 unused Engine water cooled (0.75 kW) speed controlled transmission Pharmaausfuehrung Dimensions: LWH = 1400x300x450mm Weight: approx. 70 kg
used
Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...
used
Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel
used
Attachment: eccentric screw pump used Manufacturer: Netsch Type: NE 30 A Commissions No.: 305699 Machine number: 115945 Year of construction: 1980 Capacity: 2, 1 m³/h at 6 bar Speed: 355 1/min
used
Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg
used
Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids
used
used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
used
Used filter press made by Netzsch. New 1992. 83 plates with dimensions of 800 x 800 mm. 53 m2 filtration surface structure. Hydraulic pressure. Pressure of 10 bar. Plates made of PP.
used
used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
used
NETZSCH NM076SH01L06F 20m3/h przy 50 Hz 7,5 kW, 116 rpm
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
used
No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)
used
used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths
used
Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)
used
Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.
used
1 x NEZTSCH NE80 1 x NETZSCH NU50B, 1 x PCM 100/10 1 x Manufacturer unknown
used
Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.
used
Material: Regular steel Driving force: 18,5 kW Empty weight: Approx. 300 kg Dimensions: L 2000 mm x W 550 mm x H 1000 mm Speed: 261 1/min Condition: Used Technical documentation: No Message: Delivery pressure is 2 bar
used
Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!
used
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY02512B Machine number: 409232 Year of manufacture: 2009 Output: 200-300-350 l / h Pressure: 4-6-8 bar Motor: Lenze Speed: 1410 RPM. Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready for operation (new stator)
used
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NM031BY Machine number: 321637 Year of construction: 2001 Power: 90-1500 l / h Speed: 24-400 rpm. Pressure: 0-16 BAR Motor: 1,5 kW, 400 V North, Connection suction side: DN 70 Port side: DN 70 Length: 1700 mm Condition: used, ready
used
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 30B Machine number: 235197 Year of construction: 1992 Power: 0.2-1.4 m3/h Pressure: 0-6 BAR Motor: Stöber 1.1 kW, 400 V Inlet connection: DN 50 Port side: DN 50 Length: 1500 mm Miscellaneous: electrical Verstellgetrieb with ventilation Condition: used, ready
used
Excenter screw pump Make: Netzsch Type: NE 20A Speed-controlled gearbox (manufacturer: Stöber) Speed: 64-320 rpm Power: 0.55 kW at 1380 rpm Dimensions LWH: 1200 x 300 x 350 mm Weight: approx. 80 kg
used
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm
used
Mains belt for tunnel furnaces unused -Net belt for tunnel ovens -unused -374cm wide
used
Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm
used
Excenter screw pump Manufacturer: Netzsch Type: NM031BH01L06H N°: 303316 Built: 1999 speed-controlled Mobile Gearbox: Stöber Power: 1.5 kW very good condition LWH: 1400 x 380 x 1120 mm
used
Excenter screw pump Manufacturer: Netzsch Type: NM031BH02512H N°: 322571 Built: 2001 Power: 1.5 kW LWH: 1200 x 230 x 520 mm speed-controlled various spare parts
used
Type: 2NL20A Year: 1979 Capacity: 205 l /min Motor: 0,75 kW Working pressure: 19 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1530 mm Width: 420 mm Height: 1050 mm
used
Excenter screw pump Manufacturer: Netzsch Type: NM0453H02812H N°: 319224 Built: 2000 Power: 3.0 kW very good condition speed-controlled various spare parts LWH: 1800 x 500 x 600 mm
used
Year: 1979 Capacity: 25 l /min Motor: 0,75 kW Working pressure: 13 bar - Input with threaded supports DN 15 DN 25 - Output with threaded supports DN 25 - With friction geared motor for stepless speed control - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1400 mm Width: 410 mm Height: 1020 mm Weight: kg