net used for sale

Catalogue number 4339 - replaceable spindle - spindle adjustable up/down hydraulically and pneumatically - milling apparatus adjustable at an angle - vertical spindle stroke 10cm - max distance from the table top to the spindle 18cm - table top dimensions 90x76cm - dimensions of the table top with extension and extension 159x117cm - cast iron worktop - top adjustable up / down - 4kW motor - 2 types of spindle speed 10000, 20000 rpm - with feed - smooth regulation of feed speed - diameter of the extraction connection 8cm Dimensions: - length 159cm - width 198cm - height 170cm - weight 975kg - used milling machine - very good condition - unpainted Net price: 5500 PLN Net price: 1183 EUR Net price calculated according to the exchange rate of 4,65 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

approx. 470 bays shelving system, SSI Schaefer, approx. 4,30m, 300kg / floor – used – : Price for complete acceptance from site: only 35.000.-€ (net), dismantled, packed and loaded = only 74,50 € (net) / field! Price for the purchase of individual fields with approx. 8 shelves / field: only 125.- € (net)! Also for sale are: Gratings: 210 pieces (1.09m x 0.84m x 2.9cm) Particleboard: 187cm x 179cm x 2.9cm As well as 2 elevators! Frames could ev. also be shortened to other heights! Manufacturer: SSI Schaefer Type: R7000 Year of construction: 1991 Shelves: Dimensions: approx. 1m x 0.50m Type: ZB 4533 Load capacity per floor: 300kg Number of shelves: approx. 4,200 Frame: 472 pieces Height approx. 4.30m – the frames come from a system that is approx. 8.69m high! Shelf load: 300kg Load capacity: 6,000kg Condition: used Available: now Location: Co ...

Back wall grille for pallet rack , grid mat , kennel, lattice fence, wire mesh, lattice back wall Dates/ Price: 220 x 200cm = 60 € net, 71,40 € gross 220 x 150cm = 50 € net, 59,50 € gross Mascht : approx. 4 x 10 cm Galvanized Second-hand goods Holder piece. 10€ net --AVAILABLE MULTIPLE TIMES------

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...

CATALOG NUMBER 6631 TECHNICAL DATA - 285x305mm loading hopper inlet - 7.35kW engine - number of knives 3pcs + 2 counter knives - knife size 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the extraction nozzle 100mm - dimensions length / width / height 1070x900x1980mm - weight 613 kg ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5089 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Order No. 6716 TECHNICAL DATA - max planing width 510mm - maximum planing height on both sides 190mm - maximum four-sided planing height 130mm from down: - guide rails - preliminary table, adjustable - smooth skid roller - 510mm planing shaft, 4-knife 5.5kW - 2 smooth, sliding shafts - adjustable rollers in the lower table top in advance: - pulling shaft, toothed - pressure - pulling shaft, toothed 2 pcs - pressure - 520mm planing shaft, 4-knife approximately 7.5kW - pressure - pulling shaft, smooth - pressure in the back: - side spindles 2 pieces - 1.right, vertical 130mm 4kW - 2nd left vertical 130mm 4kW - manual spindle feed - diameter of the spindles 40mm - adjustable spindles up / down, right / left - the axes are positioned alternately - side clamp 2 pcs - locking spindles - 2 types of feed speed + smooth about 3kW - diameter of the extraction conn ...

100 pcs Gitterbox Heson used Used goods, see pictures External dimensions 1000 x 800 x 650 mm (LxWxH) Color: Green Price: € 65,00 net per piece from stock From 10 pcs - Price: € 59,00 net per piece in stock From 40 pieces - Price: € 50,00 net per piece from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

Order No. 6762 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 130mm - 4 spindles: 1) horizontal bottom 220mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 7.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from the top 4 introducing, drawing, toothed rollers - from above, 1 pulling roller, rubber - at the bottom, a pulling shaft, rubber - feed on cardan shafts - smooth regulation of the feed speed - 1.5kW feed motor - lifting motor 0.25kW - electric adjustment of the planing thickness - length of the introductory top 1970mm - central lubrication - diameter of the extraction connector 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3350x1400x1430mm - weight about 1500 kg - German production - unpainted - us ...

Order No. 6752 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm - number of spindles 5: 1) horizontal lower 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (spindle 2 and 3) 11kW - 3 spindle electrically adjustable front / rear 4) horizontal top 230mm 11kW - 4 electrically adjustable spindle up / down 5) horizontal bottom 230mm 11kW - all spindles adjustable up / down, right left - all spindles equipped with electric brakes - diameter of the spindles 40mm - from above, introducing rollers, pulling, toothed 4 pcs, including 1 double - top pulling roller, rubber, double - metal pulling shaft at the bottom - pressure on the side - pneumatically pressed rollers - length of the introductory top 1960mm - adjustable top / bottom top - central lubrication - electric adjustment of the planing thickness - lifting motor about ...

Catalog No. 6804 TECHNICAL DATA - max width of the workpiece 240mm - max height of the workpiece 130mm - spindle diameter 40mm 4 spindles: 1) horizontal bottom 240mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 5.5kW 4) horizontal top 240mm 4kW - all heads adjustable up / down, right / left - all spindles equipped with an electric brake - from above, 4 metal, toothed introductory rollers - rubber, smooth, pulling roller from above - rubber, sliding roller at the bottom - 2 types of feed speed - feed motor 1.25kW - feed on cardan shafts - rollers pressed pneumatically - length of the introductory tabletop 2500mm - electric planing thickness setting - diameter of the exhaust connection 3x120mm, 150mm - dimensions length/width/height 3900x1650x1600mm - weight 1640 kg – Italian production – technical documentation – unpainted - ...

200 pcs Euro-Pool Grid Box Purple used Used goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Load capacity 1000 kg Weight 98 kg Load 5,000 kg Color: Purple The front side is foldable. One half can be opened from the top, the other half can be opened from the bottom (see pictures). Price: € 89,00 net per piece from stock From 10 pcs - Price: € 85,00 net per piece ex stock From 40 pcs - Price: € 79,00 net per piece ex stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices  ...

Catalog No. 6822 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 5 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) universal spindle 230mm, right/left rotation adjustment 5.5kW - all spindles adjustable up / down, right / left - all spindles equipped with an electric brake - spindle diameter 40mm - from above, 4 metal, toothed introductory rollers - 3 pulling rollers from above, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - side pressure from below - 2 types of feed speed - feed motor 1.2 kW - electric setting of planing thickness - length of the introductory tabletop 2500mm - locked in the cabin - central lubrication of the countertop - diameters of the extraction spigot 150mm, 4x120mm - ...

Catalog No. 6832 TECHNICAL DATA piston cylinders 5 pcs: - 3 vertical - 2 horizontal - max length of glued elements 3630mm - max width of glued elements 2270mm - engine power 0.75 kW - hydraulic piston cylinders - dimensions length/width/height 4450x880x2880mm - weight about 1000 kg ADVANTAGES – German production – unpainted - a hydraulic press – used press, very good condition Net price: PLN 13900 Net price: EUR 2989 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

CATALOG NO. 6878 TECHNICAL DATA - length of the workpiece 2600mm - workpiece width 890mm - main engine 4kW - width of the sanding belt 160mm - fan - 4 types of rotation speeds + right / left - diameter of the exhaust connection 2x120mm - overall dimensions length/width/height 3750x1300x1450mm - weight about 800 kg ADVANTAGES – Polish production – with a fan – used grinder, very good condition Net price: PLN 6900 Net price: 1484EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Net price: 4.400 € (excl. VAT) gross price: €5,236 (incl. VAT) - - - - - PTO generator 22 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 20 / 22 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 80 x 60 x 98 cm (L/W/H) - Weight: 175 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 40 hp - - - - - Sockets: - 1x 400V 32A socket - 1x 1-phase socket 230V 16A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home operation ...

Net price: 4.800 € (excl. VAT) gross price: €5,712 (incl. VAT) - - - - - PTO generator 33 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 30 / 33 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 80 x 60 x 98 cm (L/W/H) - Weight: 220 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 60 hp - - - - - Sockets: - 1x 400V 32A socket - 1x 1-phase socket 230V 16A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home operation ...

Net price: 5.850 € (excl. VAT) gross price: €6,961.50 (incl. VAT) - - - - - PTO generator 50 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 42.5 / 50 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 115 x 75 x 110 cm (L/W/H) - Weight: 360 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 80 hp - - - - - Sockets: - 1x 400V 63A socket - 1x 1-phase socket 230V 32A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home op ...

Net price: 6.650 € (excl. VAT) gross price: €7,913.50 (incl. VAT) - - - - - PTO generator 66 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 60 / 66 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 115 x 75 x 110 cm (L/W/H) - Weight: 440 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 120 hp - - - - - Sockets: - 1x 400V 125A socket - 1x 1-phase socket 230V 32A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home op ...

Net price: 7.250 € (excl. VAT) gross price: €8,627.50 (incl. VAT) - - - - - PTO generator 80 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 75 / 80 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 115 x 75 x 110 cm (L/W/H) - Weight: 450 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 150 hp - - - - - Sockets: - 1x 400V 125A socket - 1x 1-phase socket 230V 32A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home op ...

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

CATALOG NO. 6904 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up / down, right / left - spindle 1,2,3,4,5 equipped with an electric brake - spindle diameter 40mm - 5 introductory, toothed, pulling rollers from above - from above, 4 rollers, pulling, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed - feed motor 4kW - working pressure 6-10 bar - electric setting of planing thickness - motor lifting the body of about 0.55 kW - central lubrication of the co ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

CATALOG NO. 6956 TECHNICAL SPECIFICATIONS - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindle) 11kW - spindle 3 electrically adjustable right / left 4) horizontal top 230mm 11kW - 4 electrically adjustable spindle up/down 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable at an angle of 360° 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - from above 5 insertion shafts pulling metal, toothed including 3 double - from above 5 pulling shafts, smooth, rubber including 2 double - from the bottom 2 rubber rollers, pulling - 2 side clamps from the bottom - smooth regulation of feed speed - pneumatically pressed shafts - feed motor 3kW - electrical setting of planing thickness Bvzmbmkp - body lifting ...

We offer 76 x Doka lowering head, gebr. á 13,50€ net 75 x Doka fork head, gebr. á 11,50€ net 4 x Doka reusable containers, gebr. á 85,00€ net If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6926 TECHNICAL SPECIFICATIONS - loading hopper inlet 1200x1000mm - outlet for shredded wood + viper fi 200mm - rotor working width 980mm - main motor 30kW - pump motor 0,75kW - viper motor 0,55kW - number of knives 24pcs - knife size 30x30mm - sieve 10mm, 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2470x2130x1720mm - weight about 3000kg ADVANTAGES C0fhenux8o – German production – autorewers – pressure drawer – viper – very good condition – used chipper Net price: 122900 PLN Net price: 27311EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

Timber rafters, construction timber, wooden beams, construction timber, solid timber -Height: 270 mm -Width: 210 mm -Length: 6300 mm Price: 105 euros net / piece Number: 10 pieces -Length: 7300 mm Price: 115 euros net / piece Number: 117 pieces -Length: 8000 mm Price: 125 euros net / piece Number: 12 pieces

Reamers, twist drills, drill bits -Twist drill: different sizes on request -different producers -Price: Ø 10 - 30 mm EUR 0.50/mm (drill Ø 20 mm = EUR 10 net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two knife trimmers -Diameter: 10-80 mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Furniture trolleys, furniture and plastic rollers, furniture trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trucks, table trolleys, assembly trolleys -MDF block board: 19 mm -Castors: 4 -Heavy load transport trolley -Load capacity: 200 kg -Number: 1430 pieces available -Price for purchasing 10 pieces: 15 EUR net/piece -Price for purchase of 50 pieces: 13 EUR net/piece -Price for a purchase of 100 pieces: 11 EUR net/piece -Price: per piece -Dimensions: 910/425/H145 mm -Weight: 8.4 kg/piece

grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shelf leg protector Used goods, good condition, see pictures. + The plastic crash guard protects rack stands in your storage rooms or outdoors. It has a very high impact absorption and is so easy to handle: Simply clip the rack collision protection to the shelf stand. + Shelf protection made of sturdy polyethylene + Elastic, springy and dimensionally stable + Absorbs an impact force of up to 2.4 t + Withstands temperatures down to -40 °C + In the colour signal yellow for very good visibility Rack Armour shelf leg protector made of plastic for a long-lasting storage system Specifications: Field of application: Indoor, outdoor Height 600mm Color: Yellow Thickness 7mm Weight approx. 1.7 kg Temperature resistant -40°C Price per unit: € 18,-- net from stock From 50 pcs: € 16,-- net from stock From 100 pcs: € 14,-- net from stock Goods are in stock. N ...

VakuuCar+ Assembly table Modern mobile workstation with vacuum clamping device and height adjustment. Adjust your workstation to your workpiece. Size 1200 x 800 mm Height 850 - 1050 mm Flat suction cup, round, dia. 190 mm Flat vacuum cleaner 280 x 80 mm Weight 115 kg Integrated power strip for additional devices G&BAR-BV-11 relkm23 Special price: net 2690,-€ Options at extra cost: Plate swivel frame, additional suction cups, vice, Renewals Drawers G&BAR-BV-08-74 Net 190,-€ Accessory tray G&BAR-BV-08-78 net 75,-€

VakuuCar3 Slicer Modern mobile workstation with vacuum clamping device and height adjustment. Adjust your workstation to your workpiece. Vacuum Flat Cup; d = 190 mm Flat suction cup 250 mm x 80 mm Flat suction cup 240 mm x 45 mm Integrated power strip for additional devices Size 1800 x 800 mm Height adjustable 874 - 1074 mm G&FE-VACUUCAR-3 RELM23 Special price: net 2900,-€ Options at extra cost: Plate swivel frame, additional suction cups, vice, Renewals Drawers G&BAR-BV-08-74 Net 190,-€ Accessory tray G&BAR-BV-08-78 net 75,-€

CATALOG NO. 7223 TECHNICAL DATA - max planing width 770mm - max planing height on both sides 200mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - 2 rows of pressure - pulling shaft, toothed - pressure - planing shaft 770mm, 4-knife 7.5kW - pressure - pulling, smooth, output shaft from down: - guide strip - introduction table with a divided sliding shaft - introductory tabletop adjustable up/down - planing shaft 770mm, 4-knife 5.5kW - 2 smooth, pulling, adjustable shafts in the back: - 2 side spindles + clamps 1) vertical right 100mm 4kW 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - electric setting of planing thickness - 4 types of feed speeds 6;9;12.5;18 m/min - 2kW feed motor - diameters of the exhaust pipe: 2x120mm, 2x180mm - dimensions length/width/heigh ...

CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed building material under 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400,  ...

ProJet 2500 Plus in very good condition, last maintenance 03/2024. Accessories: 3DS-MJP-ECS 93902324 consisting of MJP EasyClean System 230V and post-processing system, originally packaged particle filter 93902710, Installation: 2020, Print modes: HD - High Definition, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, resolution (xyz) resolution (xyz) hd mode: 800 x 900 x 790 DPI; 32μ (0.0012 in) layers, Support materials: VisiJet® M2 SUP, Building material build material: VisiJet® Armor M2G-CL – Tough,clear ABS-likeVisiJet® M2R-CL    – Rigid clear, clear polypropylene-likeVisiJet® M2R-GRY – Rigid grayVisiJet® M2R-WT   – Rigid whiteVisiJet® M2R-BK    †...