net used for sale

Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Mains belt for tunnel furnaces unused -Net belt for tunnel ovens -unused -374cm wide

Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete

Computer cabinet, server cabinet, control cabinet, network server cabinet, computer housing -Manufacturer: apra net -Type -double opening -Dimensions: 600/600/H600 mm -Weight: 54 kg

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907 x 910 Clearance between columns (hxv) [mm] 630 x 630 Min./max. mold height [mm] 460-800 Maximum opening width [mm] 1310 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 456 Injection pressure [bar] 1890 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (L x W x H) [m] 6.95 x 2.075 x 2.48

Clamping force [kN] 5500 Clearance between columns (hxv) [mm] 1020 x 920 Maximum opening width [mm] 2251 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1074 Shot weight [g] 1034 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 39,5

Clamping force [kN] 3500 Clearance between columns (hxv) [mm] 730 x 730 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Shot weight [g] 718 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 23,5

Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 713 x 713 Min./max. mold height [mm] 400-750 Maximum opening width [mm] 1450 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 719 Injection pressure [bar] 2296 Dimensions and weight Net weight with control cabinet [t] 27 Dimensions (L x W x H) [m] 7.825 x 2.15 x 2.599

Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 720x721 Min./max. mold height [mm] 600-950 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 954 Injection weight [g] 916 Injection pressure [bar] 2267 Dimensions and weight Net weight with control cabinet [t] 24.3 Dimensions (L x W x H) [m] 8.57 x 2.15 x 2.6

used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to

used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to

used, kpl. 1 year warranty, built in 1994, plate size 800x800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 5500 x 1500 x 2200 mm, weight approx. 6 to

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, capacity 75 liters, filter area 6.5 m2, pressure max. 10 bar, dimensions 2000 x 800 x 1600 mm, weight approx. 800 kg

used, kpl. 1 year warranty, plate size 250 x 250 mm, 15 plates, open outlet, 15 mm cake thickness, pressure max. 15 bar, capacity 10 liters, filter area 1.5 m2, dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feeding pump and Piping

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Netstal Type: Synergy 900/230 Built: 1997 Closing unit Clamping force t: 90 Opening path mm: 0-350 Holm size mm: 410 x 410 Installation height min/max mm: 450/750 Spraying unit Screw diameter mm: 35 Spray weight gr: 118 Spray volume cm3: 123 Spray pressure bar: 1830 Dimensions and weights Dimensions LxWxH m: 5.4 x 1.8 x 2.2 Machine Weight Kg: 6000 Other Euromap 12 Interface

Chamber filter pressing rack Netzsch uses benefit length: 3,500 mms record transport unilaterally not available the machine served as a spare part bearer, is entire incl. wheel tins.

Netstal Type: Synergy 900/230 Built: 1996 Closing unit Clamping force t: 90 Opening path mm: 0-350 Holm size mm: 410 x 410 Installation height min/max mm: 450/750 Spraying unit Screw diameter mm: 35 Spray weight gr: 118 Spray volume cm3: 123 Spray pressure bar: 1830 Dimensions and weights Dimensions LxWxH m: 5.4 x 1.8 x 2.2 Machine Weight Kg: 6000 Other Euromap 12 Interface

used chamber filter press / filter press Netzsch 1200 x 1200 record size: 1200x1200mm cake thickness: 30 mms benefit length: 8,200 mms chamber number: 120piece filter pressure: 15 bars record transport: at the side automatically

used membrane chamber filter press / filter press Netzsch 800 x 800 mix parcels record size: 800x800 mms cake thickness: 32 mms benefit length: 4,768 mms filter surface: 34m? filter pressure: 15 bars record transport: automatically the arrangement is in a very good state.

Used eccentric screw pump Type: NM090SY02S12B Machine number: 355339 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Netzsch Type: NM090SY02S12B Machine number: 355338 Built: 2004 Flow rate: 18/36 m3/h Pressure: 10 Bar Speed: 125/150 rpm pol switchable in 2 stages

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

Type: NL 20 A Com.: 70 50 17 02 MaschNr.: 271872 Year of construction: 1996 unused Engine water cooled (0.75 kW) speed controlled transmission Pharmaausfuehrung Dimensions: LWH = 1400x300x450mm Weight: approx. 70 kg

Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths

Attachment: eccentric screw pump used Manufacturer: Netsch Type: NE 30 A Commissions No.: 305699 Machine number: 115945 Year of construction: 1980 Capacity: 2, 1 m³/h at 6 bar Speed: 355 1/min

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Year of construction: 1992

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Used filter press made by Netzsch. New 1992. 83 plates with dimensions of 800 x 800 mm. 53 m2 filtration surface structure. Hydraulic pressure. Pressure of 10 bar. Plates made of PP.

Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system

Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg

NETZSCH NM076SH01L06F 20m3/h przy 50 Hz 7,5 kW, 116 rpm

Attachment: eccentric screw pump Manufacturer: Netsch Type: NE 20 B Machine number: 263384 Year of construction: 1995 Power: 1,3 m3/h Pressure: 12 bar Engine: HEW, 0.37 KW, 400 V, 1380 RPM Connection suction side: DN 40 Port side: DN 40 Length: 1200 mm Condition: used, ready for operation, with variable speed gears

Attachment: eccentric screw pump Manufacturer: Netsch Type: A 60B Machine number: 263381 Year of construction: 1995 Performance: 19 m3/h at 2 bar Pressure: 1--8 bar Motor: 4 KW, 400V, speed 1445 RPM Connection suction side: DN 100 Port side: DN 100 Length: approx. 2000 mm Condition: used, ready