nauta mix used for sale

Used lifting mixer EBERHARDT for 200 kg dough - Kettle for 200 kg dough or 125 kg flour - Protective grille with shut-off - Machine is mobile - The motor and the agitator run extremely smoothly Visits and test runs are possible by arrangement.

Used spiral mixer KEMPER, type: SPL 125 -in bakery condition- - for 200 kg dough or 125 kg flour - 2 speeds - Forward and reverse gear - Boiler made of stainless steel - 2 Time clocks - Emergency stop switch - Back from the bakery - Technically tested, immediately ready for use The kneader is in good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Extendable spiral mixer PIETRO BERTO, type: Pegaso 340L - Machine suitable for up to 340 kg dough or approx. 200 kg flour - Including 3 tank cars - Including lifting tipper - EL. Connection: 3x 400 V, 50 Hz, 9.3 kW, 19 A - Net weight: 1,185 kg - Machine technically tested and ready for immediate use Visits and test runs are possible by arrangement.

Equipment: Insulation, Agitator, Overpressure,Manufacturer: Bertsch,Condition: used,Volume: 118,000,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Insulation: available,Insulating sheath: riveted,Insulation thickness: 90,Diameter inside: 4,000,Cylindrical height: 8,400,Total height: 13,100,Wall thickness underbody: 12,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: Drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet : 100,Note: light

Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.

Used Spiraslkneader W&P, Type: SF 75 -In good bakery condition- - for 120 kg dough or 75 kg flour - Everything technically checked - Ready for immediate use - El. Connection: 3 Ph, 50 Hz, 380 V, 19.6 A, 35 A Visits and test runs are possible by arrangement.

YSTRAL InLine Mixer Conti TDS-3, Power 15 kw, 3000 rpm, max. liquid temp. for mixing 135C, PTB 98 ATEX 1106 electric motor, including power cabinet, frequency control and operation control. Machine is in working condition, used for cosmetics production. At a reduced price compared to new. Ready for shipping. You are welcome to inspect the machine in Tallinn. Detailed information available on request.

9 litre, Stock number: T1024, Litre: 9, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Top: Open top, with lid, Bottom: Dished bottom, Agitator: Yes, Agitator type: Vertical frame agitator, Inner diameter: Ø 220 mm., Dimensions: L 220 x H 325 mm., Other: Excl. motor

Drive Unit AE 6e complete with stand with double electromagnetic safety shutdown and restart protection after power failure, incl. stainless steel socket Ø 62 and quick-release lock, three-phase gear motor with integrated motor protection switch, 2 speeds 140 / 280 rpm; Additional on-off button Planetary stirring and kneading unit as UP 15 (15l) With electromagnetic safety circuit complete with planetary stirrer head, dough hook, whisk and whisk, incl. cover and 15 litre kettle. WITHOUT MOBILE UNDERCARRIAGE

Laska Mixer ME 250 meat mixer, known for its exceptional durability, reliability and high efficiency in demanding production environments. This model has a 250 liter bowl and a maximum mixing capacity of up to approximately 200 kg, making it an ideal choice for professional use. It is made of heavy industrial stainless steel, which ensures a long service life and easy maintenance. With installed motor power from 5.5 kW to 8.5 kW, the Laska ME 250 guarantees homogeneous mixing of various meat mixtures while preserving the structure and integrity of the product particles. Choose a reliable partner for efficient production!

General SKU237S136 MakeCollette (BE) TypeVactron GRAL 75 Mach.No.84 MG7527 Year of construction1997 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume50 Ltr. Motor10 KW Specified Features - Universal mixer Gral-granulatorVactron Capacity75ltr (nett 50 ltr.) Vessel sizesdia.525x400mm With covercheck Inletdia. 50mm (1x) with funnel, Dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 140mm With motor10 kW, 415 Volt With variable speed drive frequency control (variable) With lump breakercheck Rotor speed1500 & 3000 rpm MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgear(as is ) Floorspace1,8x1,0 M Total height2,0 M Weight1200 Kg Extra SpecificationsA mixer-granulator with microwave drying including: vacuum pump Busch type Huckepack 425013 2001 microwave generator thermal oil heater Conair Churchill t ...

General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200  ...

EUROMELANGE Homogenizer Mixer Coalmix Type 50 liters Tank dimensions: 450mm diameter / 450mm depth Equipped with an emulsifier and a scraper agitator

MANESTY ACCELACOTA laboratory coating turbine Perforated turbine with counter blades Spray arm For batch sizes around 10kg, Dimensions (mm): 1300x860 H 1650mm, Inner diameter (mm): 600, Depth (mm): 440, Perforated impeller: Yes, Perforated turbine: Yes, Batch size: 15kg, Weight (kg): 386

Useful capacity of the product tank: 50 litres Total capacity up to the edge of the tank: 80 litres Operating overpressure in the product tank: -1/+2.0 bar Maximum temperature in the product tank: 125 °C Operating overpressure in the double jacket: 4.0 bar Maximum temperature in the double jacket: 140 °C Stainless steel: 1.4435 1350 Kg Variable motor speed: Outer mixer arm: 11-44 rpm Inner mixer arm: 21-84 rpm Homogeniser: 1150-4350 rpm, Volume: 80 liters , Useful volume: 50 liters , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 liters , Double envelope pressure: 4.0 bar , Weight (kg): 1350

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

Mischturm, Fabr. Liebherr, type Betomat 235 Aggregate silo size 290 m³ / chambers Cement silo: 3 silos (2x60 to + 1 divided with 2 x 30 tons) Forced Action Mixer: BHS Twin Shaft Trough Mixer = Type: DKX 1,67 / refurbished - 1 x Control: BENNINGHOVEN (latest version) Year of construction 89', the system was completely overhauled 5 years ago with control electrical conveyor belt - 1 x Kroll oil heater for winter operation The price of 65,000 euros is intended as a basis for negotiation, as the customer needs the space.

We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or ...

Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Scraper plant Type: SW CRS 150 Year of Make: 1993 Theoretical flow rate: 150 cbm/h Current: 115 A Voltage: 220/380 V Cabin weight: 4,400 kg

Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells

Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells

Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.

Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.

TECHNICAL SPECIFICATIONS Manufacturer: ELBA Description: Radial Scraper Machine Type: Stationary Type: RSA 70D Year of Make: 1996 Boom length: 20 m Connected load: 65 kW Operating voltage 380V Weight: approx. 5,000 kg

Belt spiral mixer with 1,000 l. gross capacity, equipped with 2 cutter heads (4.0 kW / 2,885 rpm each). Drive belt coil via roller chain. Incl. base frame, without motor and chain (necessary data can be provided). Neat condition.

Two identical Artofex planetary mixers with a total of 7 mixing bowls are available. Stirring capacity: 100l, container volume: 100l/120l, machine dimensions X/Y/Z: approx. 800mm/1550mm/2250mm, weight: approx. 1350kg. Including 6x bowl trolleys, mass whisk, whisk, agitator blades used and new. Machine overhaul: electrics in 2021, mechanics in 2024 and oil change. On-site inspection is possible.

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

Equipment: Heatable/coolable, Overpressure,Manufacturer: FrymaKoruma AG,Condition: used,Other: Manufacturer: Fryma Type: VME-12/C ,Volume: 22,Max. overpressure: 2.5,Max. permissible Operating temperature : 100,Design: upright,Stand shape: mobile on castors,Heating/cooling (filter bar): available,Volume double jacket: 3.3,Max. permissible Operating overpressure: 4.0,Year of construction: 2000,Technical documents: various documents,Type plate: Yes,Remarks: Due to transport damage, one of the engines broke off (see detail photos) System could be overhauled by a specialist company for homogenization technology at an additional cost

Equipment: heatable/coolable, insulation, agitator,Manufacturer: Mühlfellner Tankbau,Condition: used,Volume: 11,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Temperature control cylinder: half pipe coil,Temperature control underbody: half pipe coil,Insulation: present,Insulating jacket: hermetically welded,Material insulation jacket: stainless steel,Diameter inside: 1,880,Cylindrical height: 4,600,Total height: 5,660,Manhole / dome: in cylinder,nameplate: yes,equipment: crane eyelets,outlet: available,outlet : 50,last purpose:

Equipment: Agitator,Condition: used,Volume: 30.000,Design: upright,Base: feet,Number of feet: 3,Diameter outside: 3.200,Cylindrical height: 4.100,Total height: 6.400,Manhole / dome: in the cylinder, in the topbody,Type plate: No,Equipment: crane eyelets,Outlet: available,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Power: 2.2 / 4.4,Speed: 15 / 31,Agitator: Inclined blade stirrer,Voltage: 400,Bottom bearing: Yes,Current interferer: No, Agitator arrangement: eccentric in the topsoil,Bottom bearing: No,Current interferer: No

3-Stage In-Line High Shear Mixer 18,5 kw, max 3000 rpm, inlet DN80 / outlet DN65, three stage multishare in-line mixer, with Eagle Burgmann Thermosiphon TS2000

A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.

Equipment: Agitator,Condition: used,Volume: 40,000,Design: horizontal,Base: feet,Number of feet: 6,Diameter outside: 3,000,Cylindrical length: 5700,Total height: 4,500,Total length: 6,300,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Outlet: pipe end approx. 65mm,Last use: Foodstuffs,Surface outside: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 1.1 / 4,Speed: 480 / 980,Agitator: Propeller,Voltage: 380,Bottom bearing: No,Current interferer: No,Agitator arrangement: on the container,Manufacturer agitator:

Equipment: Insulation, Agitator,Manufacturer: Alfa Laval,Condition: used,Volume: 40,000,Design: upright,Standing form: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: Cork,Material insulating jacket: Stainless steel,Diameter outside: 3,050,Cylindrical height: 6,000,Total height: 8,300,Wall thickness underbody: 3,Wall thickness cylinder: 2.5,Wall thickness upper floor: 4.5,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets, Spout: available,Spout : 100,Remarks: Stand frame reinforced with concrete (see pictures),last use:

We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

The Velati M 2000 twin shaft paddle mixer is a robust and reliable industrial device, specially designed for food processing in commercial kitchens or production facilities. This type of used mixer is characterized by its high capacity and efficiency in mixing a wide variety of ingredients. Thanks to the twin shaft technology, the M 2000 ensures even mixing of the materials while minimizing mixing time. The paddles are designed to ensure optimal mixing without excessive friction, which maintains product quality. The stable construction of the device offers long-lasting performance and lower maintenance requirements. Ideal for use in food processing, this mixer is a valuable addition to any company that requires high-quality and consistent mixes., power: approx.: 1,600 kg mixing volume, Dimensions / weight: Mixer: L x W x H: 4,650 x 1,500 x 1,950 mm, auger: L x W: approx. 5,100 x 2,000 mm ...

Offer 2pcs gas mixers for sale. One gas mixer is complete, the other lacks the servo motor.

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

This machine is a batch butter churn which produces butter from cream obtained in a previous process from raw milk by separation. The cream is beaten and pushed in a rotating cylinder, forming butter granules which separate from the buttermilk during the process. The buttermilk is continuously skimmed until pure butter remains as the final product. Total volume: 550 liter - cream in max: 275 liter - output butter: 137,5 kg per batch. Manhole on the side for filling / emptying. Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz. New simple control panel with frequency converter for speed adjustment by simple button click, forward/reverse switch, emergency stop and main switch., Type of Machine: Butter Churn, Volume: 550 liter, Capacity of butter: ± 137,5 kg/batch, Diameter of the drum: 85 cm, Length of the drum: 100 cm, Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz, Year of Major Service: 2024, Opera ...

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

Aerator (alias whipping machine, foam producer, foam generator, industry mixer) for manufacturing foam for a wide range of different products. The heart of the machine is the mixing head, the „inline axial flow mixer. This mixing head consists of a rotor and a stator, which are equipped with many pins to guarantee a precise rotation. A liquid or pasty medium is transported preciseley through the pump. At the entrance of the mixing head, nitrogen is proportional dosed to the product quantity. Due to the rotation of the mixing head, nitrogen bladders are consistently distributed. The foam can be take from at the exit of the mixing head. The end product is a whipped mass which is now ready for filling. Mixing head type AERO 4.0 / 1368 square pin. For productions up to 4.000 l/h (product-dependent). Motor: 400 V - 19 kW - 39 A - 50 Hz. Stainless steel free standing control panel with Sieme ...

The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...