128,848 used machines on RESALE, but how to find them? Machine Search
• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz
max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...
NOW IN STOCK: New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: In stock Product Overview: We offer the MB 12 - SH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pre ...
New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: Production machine Product Overview: We offer the MB 12 - KSH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: Closed Cabin Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working ...
Three knife trimmer Feeder (4 x) Stitching unit (0380) Stacker (Rima RS1410 (2011) Cover feeder
6 feeder, type 370, 8 stations chain, type 370, 4 double universal bases, 1 cover feeder, type 1529, stitching unit, type 390, stitching control, 2 stitching heads, type HK 75, three knife trimmer, Type 361
Year of construction 1997/1999 Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Envelope size: max 642 mm; min 203 mm Capacity: max 12,000 c/h Equipment Gathering machine • 18 stations • Investor 3691 • Diverter 3614 Controls • Double and faulty sheet control • ASAC automatic self-adjusting caliper Intermediate building blocks • Set-up element • 3 vibrating element • coupled with Bookbinding • Milling and roughening station • Hotmelt backing glue • Hotmelt side gluing unit • 2 Premelters • SF Shed Envelope Feeder • SF envelope pressing • Plate chain depositing tape Cooling section • approx. 30 m • inline with Three-knife trimmers • Three-knife trimmer MM Zenith 3672 Stacker • Muller Martini compensating stacker Standards • Standard accessories •Operat ...
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
The MF20 diesel forklift with a load capacity of 2 tonnes is not only compact, but also powerful and versatile – perfect for warehouses, industry and construction sites. Equipped with a reliable Kubota diesel engine, it meets the highest efficiency and environmental standards. It also comes with a 12-month warranty or 1000 hours of use, giving you maximum peace of mind. Specifications: - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 60 L - Transmission: 1-1 Powershift - Load capacity: 2000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 100 x 40 mm - Total weight: 3320 kg - Vehicle width: 1170 mm - Total length with fork: 3572 mm - Total length without fork: 2502 mm Tyres: - Front: 7.00-12-12PR - Rear: 6.00 ...
Diesel forklift with 2000 kg load capacity convinces with its stable construction, a powerful Xinchai industrial engine and high flexibility of use. Equipped with 1070 mm forks, 3 m lifting height and precise control, this model is perfect for demanding transport tasks indoors and outdoors. Immediately available and CE certified. We have a wide range of diesel, electric, gas and all-wheel drive forklifts from 1 to 10 tonnes - enquire directly, we will advise you competently and without obligation! Technical details - Load capacity: 2000 kg - Load center of gravity: 500 mm - Free lift: 150 mm - Engine: Xinchai / Quanchai 4D27G31 (490) - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Propulsion: Diesel - Travel speed (loaded/unloaded): 17 / 19 km/h - Lifting speed (loaded/unloaded): 530 / 550 mm/s - Gradeability (loaded/unloaded): 20 / 21 % - Net weight: 3320 kg ...
3 Double Feeders, 1 Hand Feeder, 1 Cover Feeder 1522, Stiching Unit 1528, Three Knife Trimmer, Belt Delivery, Format: Max. 365x305mm, Min. 148x105mm, Max. 360x300mm, Min. 140x75mm, Stiching Thickness: Max. 10mm, Capacity: 9000 Cycles/Hour, Standard Accessories
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Diesel forklift with a load capacity of 2500 kg combines a powerful Xinchai industrial engine with a stable construction - ideal for warehouses, industry and daily continuous use. With 1070 mm long forks, a lifting height of 3 meters and sensitive joystick control, loads can be moved safely and precisely. CE certified and ready to use. In addition, we offer diesel, gas, electric and all-wheel drive forklifts from 1 to 10 tonnes – make a non-binding enquiry now and get personal advice! Specifications - Load capacity: 2500 kg - Load center of gravity: 500 mm - Free lift: 150 mm - Engine: XINCHAI / QUANCHAI 4D27G31 (490) - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Drive type: Diesel engine - Max. travel speed (loaded/unloaded): 17 / 19 km/h - Max. lifting speed (loaded/unloaded): 530 / 550 mm/s - Max. climbing ability (loaded/unloaded): 20 / 21 % - Total w ...
4 feeders 370 1 cover feeder 1529 (year 1998 - s/n 91.07099.50) 1 stitching unit Bravo MM 380 (year 1998 – s/n 91.07099) + 2 x HK75 heads 1 MM 360 (year 1998 – s/n 91.07099) 1 MM Pratico stacker Compressors Counter : 17 602 working hours
pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diesel forklift with a load capacity of 3000 kg combines powerful Xinchai engine power with a stable construction - ideal for use in warehouses, on construction sites or in industry. Thanks to 1070 mm long forks, 3 m lifting height and sensitive joystick control, you can carry out precise lifting and transport tasks effortlessly. CE certified and available for immediate delivery. In addition to this model, we also carry diesel, electric, gas and four-wheel drive forklifts in all size classes from 1 to 10 tonnes. Enquire now – we will advise you individually! Specifications - Load capacity: 3000 kg - Load center of gravity: 500 mm - Free lift: 160 mm - Engine: XINCHAI / QUANCHAI 4D27G31 (490) - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Fuel: Diesel engine - Max. travel speed (loaded/unloaded): 18 / 19 km/h - Max. lifting speed (loaded/unloaded): 440 / 480 ...
Diesel Industrial Forklift with a payload of 3500 kg combines reliable diesel power with a durable construction – perfect for warehouse work, field work on construction sites and industrial transport tasks. Equipped with 1070 mm long forks, approx. 3 m lifting height and precise joystick control, it masters even complex tasks with ease. CE-compliant and immediately available from stock. Whether diesel, gas, electric or all-wheel drive forklifts – we carry models from 1 to 10 tonnes. Contact us for a personal consultation! Specifications - Load capacity: 3500 kg - Load center of gravity: 500 mm - Free lift: 160 mm - Engine: XINCHAI / QUANCHAI 490 - Power: 40 kW at 2500 rpm - Torque: 157 Nm at 1800 rpm - Fuel: Diesel engine - Max. travel speed (loaded/unloaded): 19 / 19 km/h - Max. lifting speed (loaded/unloaded): 330 / 370 mm/s - Max. climbing ability (loaded/unloade ...
Diesel forklift 4000 kg strong convinces with its powerful Xinchai industrial engine and a particularly stable design - ideal for daily use in industry, logistics or on construction sites. With 1070 mm long forks, about 3 m lifting height and sensitive joystick control, it is the perfect solution for precise work in the toughest conditions. CE certified and immediately available from stock. Whether diesel, electric, gas or all-wheel drive forklifts – you will find a wide range of models from 1 to 10 tonnes. Send an inquiry now – we will advise you individually! Specifications - Load capacity: 4000 kg - Load center of gravity: 500 mm - Free lift: 160 mm - Engine: XINCHAI / QUANCHAI 495 - Power: 48 kW at 2500 rpm - Torque: 187 Nm at 1800 rpm - Fuel: Diesel engine - Max. travel speed (loaded/unloaded): 19 / 19 km/h - Max. lifting speed (loaded/unloaded): 340 / 380 mm/s ...
• Designation:Infeed • Type / Model: 3738.0400 • Year of manufacture: 2019 Find more here - / Contact us at -
Muller Martini Perfect Binding Line, Equipped With: Endsheet Feeder, Perfect Binder: Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Book Block Feeder, Hot-Melt Spine and Side Gluing with Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Trimmer. Three Knife Trimmer: Muller Martini 3670 With Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour.
Muller Martini Presto – Saddle Stitcher SN: 91.06986 – 400 V The Muller Martini Presto is a highly reliable and efficient saddle-stitching system designed for medium-to-high-volume production. Renowned for precision, flexibility, and user-friendly operation, it is ideal for producing magazines, catalogs, brochures, and a wide variety of stitched print products. This complete production line includes stitching, gathering, cover feeding, trimming, and product transport—perfect for high-quality book and booklet finishing. System Configuration Stitching Machine – Type 1550 A robust stitching unit engineered for consistent and accurate wire stitching performance. 4 Double Stations – Type 1551 Which make 8 Stations Four dual feeding/processing stations that ensure continuous, efficient workflow and increased production capacity. Cover Feeder – Type 1528.0417 Automated cov ...
pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V
Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h
Technical data according to Muller Martini
Muller Martini Progress S 24 or 25 inch Year : 1996 Print width: 20" Maximum print speed: 335 m/min 5 printing units, type 2047 UV dryer: yes, see below 2 turning crosses Camera: BST SHS 3000 Pro camera system Cross-cutter: yes, MM 2088 Double-hole punching (24" + 25") Stack delivery: MM UNISTACK 2000 Turning crosses: 2 pcs Cylinder range: convertible to 24" and 25" Additional magnetic cylinder (for die-cutting plates) and one perforating cylinder Numbering tower: yes Color control: overall, manual color zone control UV drying: Baldwin SpecTronic Spiral folding 24" and 25" Double-hole punching (24") + 25") Rubber washing system: no Unwinder 2036/2037 and rewinder 2033
Distribution belt / Deserting system For splitting a shingle stream into two processing lines Condition: overhauled, serviced, fully functional, ready for use
One used Müller Martini Inventa Plus 3212 Year of man. 2001 Max. Size : 320 x 385 mm Min. Size : 80 x 120 mm Mechanical Speed : 20-200 Cycles/Min
Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462 ...
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pd-MU 3x690 V 50 Hz 2000/1 A-1-0-+3 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 600 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with its own drive (attention, currently no own control). Equipped with recessed handle for easy product removal.
pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece
5 feeders 370 1 cover feeder 1529.0416 (s/n NN26787) 1 stitching unit Bravo MM 380.0450 (s/n MMZ01077446) + 2 x HK75 heads 1 MM 449 trimmer 1 Rima stacker 3 x compressors Counter : 10 511 working hours More pictures available upon request.
pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
NH fuse -Type: HLS 00 -50 A 500 VAC -Price: per package of 3 fuses -12x packages: 3 pieces each -Weight: 0.6 kg per package
1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB II Year 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Gear motor, electric motor, electric gear motor -Manufacturer: Müller & Georg, geared motor type ZGO G3 K 4 -Speed: 160 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 22 x 50 mm -Protection rating: IP 54 -Dimension: 450/158/H205 mm -Weight: 14.8 kg
Stacking tongs, box lifter, bundle clamp, gripper -Manufacturer: Müller Martini, pneumatic stacking tongs type 0277.0401 -Load load: max. 250 kg -Clamping range: 850 to 1350 mm -Quantity: 2x grippers available -Price per piece -Transport dimensions: 940/250/H530 mm -Town weight: 87 kg/pc.
NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg
Fadenheftmaschine - Sewing Machine Müller Martini FK II S Size min. 120 x 70mm - max. 280 x 440mm 6 Stitching heads Speed max. 70 Stitching/min. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
maximum number of results exceeded
please refine your search
