136,284 used machines on RESALE, but how to find them? Machine Search
CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial
Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately
milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately
Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately
Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately
Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Müller Martini 3641, Transfer Element To Binder Müller Martini 3643. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmer: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 Cycles/Hour, Format: Min. 100x140mm, Max. 420x305mm, Book Thickness: Min. 3mm, Max. 60mm, Cover Width (Open): Min. 203mm, Max. 642mm.
Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee
English: Model: MB12 Bucket capacity - 0.022 m³ Chassis width - 930 mm Track length - 1200 mm Chassis ground clearance - 370 mm Gradeability - 30° Track width - 180 mm Tank volume - 5.5 L Transport length - 2870 mm Excavator height - 2285 mm Overall dimension - 2870 x 930 x 2285 mm Engine model - Koop 192F / Kubota D722 Engine power - 7.6 kW / 2400 rpm; 10.2 kW; 10 kW / 420 cc Turning radius - 1490 mm Max. digging height - 2490 mm Max. dumping height - 1745 mm Max. digging depth - 1725 mm Max. digging radius - 3030 mm Max. vertical digging depth - 1655 mm Bucket digging force - 6.5 kN Operating weight - 1200 kg All machines are new and come with a one-year warranty. Additional attachments such as rakes, augers, buckets, or grapples can be added to your order if needed. You can choose from a variety of engines that vary in size and power accor ...
English: The MB 10-B is our most compact and lightweight model—ideal for projects requiring maneuverability in tight urban spaces or residential backyards. With a sturdy build and precise controls, it's a favorite for small-scale landscaping and trenching. Despite its compact frame, it offers impressive digging force and a smooth, reliable experience. Technical Specifications Weight: 1000 kg Dimensions: 2870 x 930 x 2213 mm Standard Bucket Capacity: 0.022 cbm Engine: KOOP 192 / Briggs & Stratton Power Output: 11.7 hp / 8.6 kW or 13.5 hp / 10.07 kW Issue Rating: EURO V Displacement: 0.499 / 0.794 L Cooling Method: Air-cooled Max. Digging Depth: 1720 mm Bucket Digging Force: From 6.5 kN Hydraulics: Permco TJ Gradeability: 30°
used
<br><br><br>Still in operation: Yes<br>Available: immediately
New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request
At the top of the line, the MB 20 is built for professionals who require serious performance. With the highest digging depth and force in the series, it's perfect for commercial applications. Its larger frame provides superior gradeability and traction, making it ideal for varied terrain and extended operations. Weight: 2000 kg Dimensions: 3110 x 1250 x 2280 mm Standard Bucket Capacity: 0.040 cbm Engine: Laidong 385 / Kubota D722 Power Output: 25 hp / 18 kW or 16.4 hp / 12.2 kW Issue Rating: EURO V Displacement: 1.617 / 0.719 L Cooling Method: Water-cooled Max. Digging Depth: 2050 mm Bucket Digging Force: From 10 kN Hydraulics: Permco TJ Gradeability: 35°
Size max 480 x 320 mm Speed max 18,000 c / h Equipment 1 feeder 3681
Built in 2001 Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment o main product feeder (shuttle feeder for perfect bound books) o opening station with sucker and sword o 4 insert feeder o delivery to the right
The MB 25 is where compact design meets elevated performance. With increased digging power and bucket capacity, this machine thrives in both urban projects and light commercial work. Its balanced weight and enhanced gradeability ensure stability and traction even on uneven terrain, while maintaining a compact form ideal for maneuvering in tight spaces. Weight: 2000 kg Dimensions: 3110 x 1250 x 2280 mm Standard Bucket Capacity: 0.040 cbm Engine: Laidong 385 / Kubota D722 Power Output: 25 hp / 18 kW or 16.4 hp / 12.2 kW Issue Rating: EURO V Displacement: 1.617 / 0.719 L Cooling Method: Water-cooled Max. Digging Depth: 2050 mm Bucket Digging Force: From 10 kN Hydraulics: Permco TJ Gradeability: 35°
- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors
The MB 35 takes operator efficiency and machine durability to the next level. With a robust chassis, high torque capacity, and superior arm force, it's tailored for demanding commercial work. From site prep to demolition, this machine handles heavier tasks with ease—offering a professional-grade experience packed into a versatile compact frame. Weight: 3500 kg Dimensions: 4180 x 1500 x 2300 mm Standard Bucket Capacity: 0.100 cbm Engine: Xinchai 490 / Kubota V1505 Power Output: 27.4 hp / 36.8 kW or 33 hp / 26.5 kW Issue Rating: EURO V Displacement: 2.67 / 1.498 L Cooling Method: Water-cooled Max. Digging Depth: 2500 mm Bucket Digging Force: 22 kN Hydraulics: Permco TJ Gradeability: 35°
Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...
pressure: 63 t distance between columns: 0 mm stroke: 160 mm table surface area: 630 x 500 mm dayligth: 400 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The flagship of the lineup, the MB 40 delivers top-tier performance for high-demand job sites. Built for heavy-duty excavation, this model features exceptional digging force, unmatched gradeability, and premium operator comfort. It's ideal for contractors who need the strength of a full-sized excavator in a more compact, easily transportable unit. Weight: 4000 kg Dimensions: 4400 x 1600 x 2300 mm Standard Bucket Capacity: 0.700 cbm Engine: Xinchai 490 / Kubota V1505 Power Output: 27.4 hp / 36.8 kW or 33 hp / 26.5 kW Issue Rating: EURO V Displacement: 2.67 / 1.498 L Cooling Method: Water-cooled Max. Digging Depth: 2650 mm Bucket Digging Force: 55 kN Hydraulics: Permco TJ Gradeability: 35°
High-performance milling spindle, unused high speed milling spindle, unused Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim FS 40-10-30-4- AOW B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40 Power 16 kW Torque: 30 Nm
High-performance milling spindle, unused high speed milling spindle, unused high speed milling spindle, unused/new Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim FS 40-10-30-4- AOW B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40 Power 16 kW Torque: 30 Nm
CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW
With a robust operating weight of 8,500 kg, the RB 85 offers greater lifting capacity and stability while maintaining the speed and efficiency of a road-ready machine. Operating Weight: 8,500 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP at 2200 rpm Max Torque: 340 Nm at 1400–1700 rpm Displacement: 3.6 L Hydraulic System: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 heavy-duty pneumatic tires Drive: 4-wheel drive (with optional differential lock) Max. Travel Speed: 28 km/h Max. Digging Depth: 3556 mm (depending on boom config) Cabin: Fully enclosed with ergonomic seat, climate control, and wide visibility Swing Speed: 9 rpm Attachment Interface: Quick coupler standard; supports hydraulic hammers, augers, grapples, and more
cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: ...
optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener
Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm
cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...
The RB135 and RB 150 are wheeled excavators engineered for high-efficiency digging and utility work in urban and semi-urban environments. Operating Weight: 15,000 kg or 13,500 kg Engine Options: Kubota V5009-T or Yuchai YC4D115 (EURO V) Power Output: Up to 157 HP (Kubota) or Up to 115 HP (Yuchai) Max Torque: Approx. 600 Nm at 1500 rpm (Kubota) or Approx. 380 Nm at 1700–2000 rpm (Yuchai) Displacement: 5.0 L (Kubota) / 4.2 L (Yuchai) Hydraulic Pump: Kawasaki PNM variable axial piston pump Hydraulic Valve: Parker high-performance control valve Swing Engine: Sunjin (South Korea) Tires: 9.00-20 industrial-grade tires Controls: Hydraulic-electric joysticks Cabin: Enclosed with heating, ventilation, and ergonomic seating Hydraulic Flow: High-capacity system for powerful attachments Max Travel Speed: Up to 30 km/h Max Digging Depth: Approx. 4,750 mm (d ...
Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG
6 Feeder Stations, 1x Cover Feeder, Stiching Unit with 2x HK 75, Three Knife Trimmer, Rima RS-10S 9-1/4" Stacking Delivery, M-No. 103403-10, Capacity: 12000 Cycles/Hour
max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three knife trimmer (0360) Feeder (4 x 1555) Stitching unit (0380) Stacker (Rima RS1410 (2011)) Cover feeder (1529)
Year of construction 1997/1999 Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Envelope size: max 642 mm; min 203 mm Capacity: max 12,000 c/h Equipment Gathering machine • 18 stations • Investor 3691 • Diverter 3614 Controls • Double and faulty sheet control • ASAC automatic self-adjusting caliper Intermediate building blocks • Set-up element • 3 vibrating element • coupled with Bookbinding • Milling and roughening station • Hotmelt backing glue • Hotmelt side gluing unit • 2 Premelters • SF Shed Envelope Feeder • SF envelope pressing • Plate chain depositing tape Cooling section • approx. 30 m • inline with Three-knife trimmers • Three-knife trimmer MM Zenith 3672 Stacker • Muller Martini compensating stacker Standards • Standard accessories •Operat ...
The GB 180 crawler excavator is engineered for serious excavation, lifting, and heavy-duty operations. Operating Weight: 18,000 kg Engine: Cummins QSF3.8 (EURO-compliant) Power Output: 93 kW (125 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure hydraulic pump Control Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Traveling Motor: Eaton or PMP Hydraulic System Pressure: 28 MPa Bucket Capacity: 0.8 m³ Bucket Digging Force: 98 kN Arm Digging Force: 68 kN Swing Speed: 0–12 rpm Travel Speed: 2.8–4.2 km/h Gradeability: 30° Overall Length: 8,540 mm Overall Width: 2,720 mm Overall Height: 2,920 mm Undercarriage Width: 2,720 mm Ground clearance: 480 mm Track Width: 600 mm Maximum Digging Radius: 8,985 mm Maximum Digging Depth: 5,975 mm Maximum Digging Height: 9,430 mm Maximum Dumping He ...
6 feeder, type 370, 8 stations chain, type 370, 4 double universal bases, 1 cover feeder, type 1529, stitching unit, type 390, stitching control, 2 stitching heads, type HK 75, three knife trimmer, Type 361
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Operating Weight: 23,000 kg Engine: Cummins QSB7 (EURO V compliant) Power Output: 124 kW (166 HP) at 2050 rpm Hydraulic Pump: PNM high-performance pump Control Valves: Parker hydraulic control valves Swing Engine: Sunjin (Korea) Traveling Motor: Doosan Hydraulic System Pressure: 34 MPa Bucket Capacity: 1.1 m³ Swing Speed: 0–13 rpm Traveling Speed: 3.8–4.2 km/h Gradeability: 30° Maximum Digging Radius: 9.936 mm Maximum Digging Depth: 6,550 mm Maximum Digging Height: 9,680 mm Maximum Dumping Height: 6,730 mm Overall Length: 9,565 mm Overall Width: 2,990 mm Overall Height: 3,000 mm Track Width: 600 mm Track Height: 950 mm
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...
NOW IN STOCK: New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: In stock Product Overview: We offer the MB 12 - SH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pre ...
maximum number of results exceeded
please refine your search
