my way used for sale

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

Capacity 20.000 kg Wingspan approx. 9,450 mm Hook way approx. 23,000 mm Make HEIMANN/SWF Year of production/workshop review 2006/2016 Crane radio control equipped with SWF double girder trolley, Working speeds: Hoist approximately 0.67/4.0 m / min Katz LG 5.0/20,0 m / min Crane chassis up to 30.0 m / min

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

Sideloader ICEM GTE 20/502-4 d Four way forklift Strength 12500 kg Forks 800 mm Masch. No. 17346 Lifting height mm 5020 Height 2300 mm Free stroke 1200 mm Electric motor Batteries good Battery charger available Built in 2005 Weight without battery 2000 kg L x W x H: 240 x 180 x 220 cm The machine is in perfect condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Roles of the guide way must be replaced under current; ready for immediate use

Heavy Duty Lathe POREBA Model: TCA 160 /12000 Condition: Excellent, ready to work Year of manufacture: 1963 Complete Offer includes a lot of equipment Technical details : Control: Manual High of centrem over the flat way: 800 mm High of centres over the floor: 1 600 mm Swing over carriage: 1 280 mm Diametre of 4-jaws chuck: 1 600 mm Distance between centres: 12 000 mm Load carrying capacity without steady: 30 000 kg Load carrying capacity with 1 steady: 35 000 kg Load carrying capacity with 2 steady: 40 000 kg Equipment: - head for grinding 2 psc. - constant's lunette 3 psc. - mobile lunette: 1 psc. - milling head 1 psc. - carriages 2 psc. - change gear set, etc

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the desired size to be output and have milling paths calculated. This created file is therefore opened in the KinetiC-NC control software of the machine and is therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned m ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

Hand roller spreader with wheel drive, capacity approx. 60 ltr., spreading width approx. 70 cm. scattering way: salt about 5-6 km, Sand 1 km. Condition: Super See more winter maintenance technology from A to Z stock - photos!

The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

Stock number U802V-5 Used stainless steel centrifugal pump by INOXPA (Spain) type S-26E. Pump is driven by el. motor 4 kW, 3000 rpm, 220/380 V, 50 hz. Inlet has a diameter 65 mm and outlet has a diameter 45 mm. Inlet is equipped with one way valve. Rotor has a diameter 145 mm. Pump has a working output up to 50 m3/h and delivery up to 35 m.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

1 factory-tested, well-preserved pillar jib crane Payload 500 kg RADIUS approx. 2,300 mm Overall height approx. 2,600 mm Bottom bracket approx. 2,350 mm Hook way approx. 4,000 mm make SWF Workshop inspection, 2017 equipped with an electric chain hoist, floor operation on the chain hoist movable working speeds: Hoist around 4.0/16.0 m / min Trolley gear by hand rotation by hand

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

Te Koop: Koltek manifold: Three-way valve met air motor. Type 50 DH-53 2 duims met 3 aansluitingen.

Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency tin: INnen sechskant Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Marcel Spiedo 1200 Machine Spiedo 1200 produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with two drums to load meat, receiving the tape (200 mm) trolley for example: the additional tools (1750 x 690 x 620 mm) Specification: Brand: Marcel Spiedo Model: 1200 Unit size: 1490 x 1050 x 2600 (mm) Weight: 500 kg Power supply: 400V 50 Hz 3N Total power: 0.5 kW Made of stainless steel

Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency actuation: inner hexagon Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Emsens Tradition Emsens Tradition produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with a tape for loading meat Specification: Category used machines " Subcategory other machines Type of other meat Height 1900 mm Width: 3500 mm Length 2300 mm Electric power supply The main material stainless steel, acid-proof

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

Horizontal Lathe POREBA TCA 160 x 12 m Condition: very good, complete Technical details: Max. swing over bed 1600 mm Max. swing over carriage 1280 mm Max. swing over gap 1600 mm Turning length (between centers) 12000 mm spindle turning speed (min) 0.85 rpm spindle turning speed (max) 170 rpm The width of guide way 1100 mm Dia. of spindle bore 105 mm Taper of center sleeve 120/80 Feeds: bed slide/longitudinal 0,19-5, 0 mm/1 spindle rotation Feeds cross slide 0,095-2, 5 mm/1 spindle rotation Rapid travel-longitudinal/face 4000 mm/min Max work piece weight centre this centre 30000kg Max work piece weight with 2 steady rest 40000kg Faceplate diameter 1600 mm Metric thread 35 strokes-1-50 mm Whitworth thread 35 strokes-24-1/2 " Module thread Diametrical pitch thread Section of tool shank 70x70mm Travel of the top slide 0,095-2, 5 mm/1 spindle rotation Max.travel o ...

Private sale Item condition: maintained Availability: immediately Coating band: yes ChocoTemper is part of the product line of the ICB Tecnologie chocolate temperature control device, with a tub capacity of 24 kg. Both machines can be equipped with vibrating table, while the coat straps for Chocotemper 24 are available • Stable stainless steel frame • Two independent motors, one for the screw and one for the agitator, for a longer life • Standard, removeable screw for easy cleaning and a quick change of chocolate • Control of the chocolate flow with pedal possible • Touchscreen control panel with various options: - Automatic dosages for a good way to do the right chocolate. - Night mode to keep the chocolate dissolved and reduce consumption during downtimes. - Counter-rotation of the screw, which is useful during cleaning The Chocotemper 24 chocolate temperature contro ...

Food Pack machinery / flow pack machine. The machine is designed for wrapping various products for food industry products or other non-food products in film. Manufacturer: Food Pack Machinery SRL Italy Type: Leonardo 700 Year of production: 2010 Control from the color touch screen panel Max film width 700 mm Dimensions: Length 6160 mm, Width 1390 mm, Height 1860 mm Weight: 600 kg Electricity: 380 v., 50 Hz, 6.4 kW Without need: 6 bar Packaging film: Polyethylene The width of the machine's packaging tunnel can be changed according to the width of the wrapper (film) with a handwheel and a digital display. The height adjustment works the same way. The machine is in good condition and clean.

Internal circular grinding machine with plan grinding equipment, second-hand internal and face grinding machine, used Type / type: SI 6/1 x 315 Manufacturer / make: WMW Year / year of make: 1983 schleifbarer the protection of workpiece diameter / grinding diameter: inner / internal 20... 400 mm; outside / external 500 mm maximum workpiece diameter workpiece protection /. maximum diameter of work piece: 500 mm Max grinding depth / maximum grinding length: 315 mm schleifbarer angle of cone / cone grinding: 60 ° Internal grinding motor power / power drive motor grinding of internal: 7,5 kW Internal grinding spindle speeds / rev's of internal grinding spindle: 2640... 16500 RPM Power cylindrical grinding device / power drive of face grinding attachment: 4 kW Power work-piece motor / power drive of workpiece engine: 1.5 kW Workpiece spindle speeds / rev's piece of work s ...

Immediately available from stock: Used, plug-in AHT Miami freezers, freezers or switchable freezers/freezers in different Sizes (185, 210, 250cm). The refrigerated and freezer chests of the leading brand manufacturer AHT convince by quality, durability, optimal product presentation and low operating costs. No wonder AHT chests are THE fridge stake of most major supermarket chains and discounters. Our refrigeration and freezerunits are all equipped with interior lighting and panoramic glass sliding lids and can be assembled into sales-effective and space-saving cooling islands. We would be happy to advise you on your personal cooling island composition. The used refrigeration equipment is all checked for functionality, cleaned and reconditioned if required. This results in different price categories (see prices below). Depending on your wishes and your individual budget, we offer ...