my way used for sale

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

The scope of delivery includes: 01x Ceiling Mirror, II. Choice ( New) Outer diameter: 800 mm Total height: approx. 300 mm Material: Plastic Incl. fastening chain: approx. 5,000 mm Weight / piece: approx. 2.10 kg Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or soiling. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Conductivity/MOhm transmitters for inductive and conductive sensors in the field housing. Degree of protection IP 65. Operation with menu navigation and Communication display. Signal outputs: 0/4..20 mA for conduction Ability and temperature, 2 output Contacts. Continuous polarization compensation. Adjustable: Monitoring of the USP limit, concentration measurement of customer-specific media, Characteristic curves for current outputs.

Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

- Auto power-off - Air blower - Chip conveyor - Spindle cooling (oil cooler) - 30 ATCs - Travel (X x Y x Z): 1.020 x 540 x 530 mm - Control: Fanuc 18iMB - Max. spindle speed: 12.000 rpm - Spindle type: BT 40

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Key data: 178 mm, 485 mm, 100 mm

Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg

Frequency-controlled drive motor Drive test bench Power 110 KW Voltage 400 V Speed 1500 to 5000 rpm adjustable motor with -Frequency - Incremental encoder, mains choke, mains filter - External fans Emergency Out Facility Hand control unit Frequency: Type: VCD 4 S 160A AZ/NS Serial Number: BKQ4S160AN20A-1 Output power: 207 KVA Motor power up to 160 KW Total weight approx. 1000 kg

Wrapper

Control, bridge control, loading technology control, dock leveler control, ramp control, gate control -Manufacturer: mydocking, control for folding wedge bridges or similar -Type: TA MS 400V -Voltage: 3Ph 400V AC -Motor power: up to 1.5 kVA -Dimensions: 220/140/H270 mm -Weight: 2.3 kg

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40

Motor protection switch, star-delta switch -Type: MYehb -Price: per piece -Number: 18 available -Weight: 2 kg

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

Manufacturer: MYCRONIC Model: MY100SX-14 Year of Manufacture: 2011 The MY100SX-14 offers proven technology for electronics manufacturing, combining simple operation with consistent quality. It is a solid investment for production lines with medium to high throughput requirements. KEY FEATURES - HYDRA High-Speed Head - • High-speed pick-and-place system for maximum productivity in component placement - Integrated Quality Assurance - • Optical centering and electrical testing ensure the highest placement quality - Flexible Application Options - • Suitable for large components with inline conveyor technology and reliable performance Find more here - / Contact us at -

Automatic cereal humidification equipment Fully overhauled, tested and painted

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Manufacturer: Wuxi Model: MYJ-300TB Year of Manufacture: 2024 Find more here - / Contact us at -

Doosan 3-Axis CNC Vertical Machining Center Heavy-Duty 3-Axis Vertical Machining Center Built for aggressive cutting capacity, this 2018 Doosan Mynx 7500/50 is a robust 3-axis CNC vertical center ideal for heavy part machining and high-productivity workflows. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Doosan Model: Mynx 7500/50 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1525 mm / 762 mm / 625 mm Table size: 1600 x 750 mm Max. workpiece weight: 1500 kg Spindle speed: 60 – 6000 rpm Spindle motor power: 18.5 / 22 kW Max. torque: 452 Nm Spindle taper: DIN 69871 B SK 50 Distance spindle nose to table: 200 – 825 mm Distance spindle center to column: 785 mm Rapid traverse (X, Y / Z): 30 m/min / 24 m/min Feed rate (X, Y, Z): 1 – 12,000 mm/min  ...

This 3-axis Okuma SPACE TURN LB 300 MYW was manufactured in 2004. A robust lathe featuring a CONTROL UNIT: OSP E100L, main spindle speed of 4000 rpm, and a motorized spindle speed of 5000 rpm. It has a turret type of 12 UT VDI with 12 turret tools, enhancing its versatility. Ideal for those looking to buy this Okuma SPACE TURN LB 300 MYW lathe. Contact us for further details regarding this lathe.

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

Excellent Complete Myford Super 7 Metric Lathe Gearbox & Power Cross The lathe also comes with various extras which i will list out below. I may miss some but will do my best 5" 4 jaw self centering chuck (Pratt Burnerd) 3" 4 jaw self centering chuck (Pratt Burnerd) 6" 4 jaw independant chuck (Pratt Burnerd) 3" 3 jaw Self centering chuck (Pratt Burnerd) 4" 3 jaw self centering chuck (Pratt Burnerd) Many of the chucks got internal and external jaws 6 jaw swiss chuck with internal and external jaws Albrecht 0-3mm chuck with morse taper no1 Albrecht 0-6.5mm chuck with morse taper no1 Jacobs 0-3/8" chuck with morse taper no1 9" face plate 7" face plate x 2 6" face plate Jacobs 1/2" tailstock chuck Jacobs 3/8" tailstock chuck Jacobs 3/8" tailsock chuck Jacobs 1/4" tailstock chuck German 1/4" tailstock chuck Myford vertical slide swivel type with dials fitted Myford  ...

This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information.

This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details.

Manufacturer: Cesare Quaranta Model: Mya Pro Year of Manufacture: 2023 Accessories: 16 pads + mat Applications: Weight loss, circumference reduction, skin tightening, cellulite treatment Technology: Combination of ultrasound, EMS (electrical muscle stimulation), and heat Condition: Well-maintained and fully functional Find more here - / Contact us at -

This 4-axis Kitamura Mycenter HX500iG was manufactured in 2015. It features a maximum workpiece diameter of 800 mm and a maximum workpiece height of 1,100 mm. The machine includes a robust pallet size of 500 x 500 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter HX500iG horizontal machining centre we have for sale. Contact us for further details.

This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details.

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

horizontal machining center, year 2007, CNC 16i-MB. Used machine in good condition. More info & price on IndustrialBuyer.

I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key

Key data: 480 mm, 785 mm, 45 1/min

Control OKUMA ... OSP-P300LA Turning diameter... 480mm Turning length... 785mm Inclined bed Axis Y ... 115mm Sub-spindle Spindle bore ... 80mm Tool turret ... 12/12 Bar Feeder Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 45-5000 rpm. Speed of the driven tools ... 45-6000 rpm Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power ... 22kW L x W x H ... 3330 x 1800 x 2250 mm Machine weight ... 5250kg Chip conveyor

This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details.

horizontal machining center, year 2004, CNC 16i-MB. Used machine in good condition. More info & price on IndustrialBuyer.

Manufacturer: Mycronic Model: SMD TOWER 6150-7 The SMD Tower is an automated and flexible storage unit designed for positioning near the production line. The SMD Tower provide a controlled environment with the right components in the right place at all times, enabling quick and smooth changeovers in your SMT line. You can even store your most frequently used components with an Agilis feeder attached. The SMD Tower 6150-7 has a max capacity of 980 and a footprint of 1.46m². The key benefits of the SMD Tower: • 75% reduction of labour cost • 50% reduction in P&P downtime • 90% reduction of retrieval time • It keeps track of all stored reels and component quantities • A unique identification code ensures the right component is always provided or storage making mix-ups almost impossible • Needs barely one square meter of space to store up to 658 reels, and can be integr ...

Used plate heat exchanger made by MYSAK GROUP, model PSR 3500. Used for heating juices. Technical specifications: - Electrical power of the circulation pump: 180 W - Capacity: 3,500 l/h - Saturated steam requirement: 600 kg/h - Saturated steam pressure: 2 bar - Process water requirement: 35 l - Air pressure: 8 bar - Net weight of the unit: approx. 650 kg

Manufacturer: MYCRONIC Model: My600 JP Year of Manufacture: 2024 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. Holder Units Not included Ejector Not included Auto Repair YES Glue option/SMT adhesive Can be upgraded (ejector variant) High speed Can be upgraded Shared databases Yes Board indexing Can be upgraded Fine pitch Can be upgraded Software: Latest version, which can be installed during setup FLE or Jpcam FLE can be provided My Center Can be provided Find more here - / Contact us at -

This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details.

Myizaki shot blaster that was used with a combined drawing line for 7mm - 24mm bar diameters. 60 m/min through put speed. 3 x 22Kw motors. Machine is in great condition. YOM 1982

Manufacturer: Mydata Model: MY12 Year of Manufacture: 2006 Type of Machine : Pick and Place Machine Condition: Good running condition Software Version: 2.9.14c Heads and Tools - Hydra Head - 21,000 placements - Midas Head - Mount Tools - DVC Camera - 9 Magazine Positions - Tray Wagon Magazine - capacity for 5 JEDEC Trays Active Options - Optical centering - Electrical two pole test - Electrical transistor test - Z High speed - Conveyor HYDRA - HYDRA High Speed - Autoteach - Linescan for Z MYSpeed Included Feeders and Magazines - 7x Mydata L-014-000IC - Tape Magazine TM8C (Original, Tested) - 1x Mydata L-014-0002C - Tape Magazine TM12C (Original, Tested) - 1x Mydata L-014-0400C - Tape Magazine TMC Flex (Original, Tested) - 2x Mydata L-014-0418 - Flex Feeder 2 x 16 mm (Original, Tested) - 1x Mydata L-014-0419 - Flex Feeder 1 x 24 mm (Original, Tested) - 1x Mydata L-014-0016 - Vi ...