129,005 used machines on RESALE, but how to find them? Machine Search
Viewing by appointment Auction-ID: A1-40262-38
groove width:40 mm x-travel:1300 mm throat:- mm y-travel:150 mm z-travel:200 mm tool taper:SK40 spindle speed::350 ? 4000 upm table clamping surface::1300 x 300 mm weight of the machine ca.:3,5 t Coolant system Dimensions: 1600 mm x 1500 mm x 1800 mm (L x W x H) Hydraulic system Partially overhauled
groove width:- mm x-travel:1300 mm throat:- mm y-travel:150 mm z-travel:150 mm spindle speed::50/6000 upr tool taper:SK 40 numbers of positions in the tool changer:8-fach weight:2.500 kg Operating hours: 2,100 h Clamping hydraulics Pendulum operation possible 8-position tool changer
pressure:100 t distance between columns:1180 mm stroke:1 - 120 mm no. of strokes:90 /min distance table/ram, stroke up:470 mm table surface area:1100 x 700 mm table height over floor:800 mm side window:400 mm ram surface:740 x 350 mm ram adjustment:100 mm power requirement:37,0 kW weight:11,0 t dimensions (WxDxH):2,3 x 2,0 x 3,5 m knuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich
Mykator Feinmesszeugfabrik Suhl in wooden box Dimensions: 255 x 125 x 75 mm
CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial
Extensive retrofit 2018/2019, approx. 500,000 € Connected load: 40kW. Air pressure required: 6 bar. Control modernization with the following scope: - Renew the control cabinet - Replace the main control panel - Replace the terminal boxes - Replace the servo drive of the C and Y axes - Modernize the feeder and the alignment station - And renew the wiring of the machine Expenses for the control system conversion: Electr. Circumference of punch 1. Punch 2 and Linear Automatic Control - PLC control Siemens S7 - Security technology and standard automation integrated into an overall system - Safety-related communication easily via standard fieldbuses - Simple and practical handling, thus high acceptance by the operating personnel - Effective, fast diagnostic functions, for maximum availability of machines and systems - NC sequence control Siemens SIMOTION - Servo drives Sinamics drive syst ...
Pressure capacity: 35,000 kg Plunger strokes: 110 1/min Throat: 220 mm Plunger adjustable: 50 mm Stroke adjustable: 0 - 70 mm Motor power: 3 hp Voltage: 220/380V Table dimensions: 550 x 460 mm
Machine number: 896471 Pressure capacity: 5000 kg Throat: 115 mm Plunger strokes: 165 1/min Adjustable plunger: 40 mm Stroke adjustable: 0 - 50 mm Motor power: 0.75 hp Table dimensions: approx. 280 x 220 mm with pneumatic punching tool installed
Press force: 25 t Throat depth: 190 mm Slide strokes: 80/min Slide displacement: 50 mm Stroke adjustable: 8 - 80 mm Operating voltage: 380 V Connection: 3 hp Table dimensions: 570 x 430 mm
Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm
Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm
Machine number: 6750296 max. load: 450 kN Throat: 230 mm Plunger strokes: 80 1/min Plunger adjustable: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 kW Voltage: 380 V Table dimensions: 700 x 520 mm
Müller Elektronik Comfort Terminal – ISOBUS – functional Universal terminal for agricultural applications ISOBUS-capable with activations for: ISOBUS-TC Tractor ECU Section Control / Track Leader Operation via keypad and colour display Features: Control of attachments (ISOBUS) Documentation / Task Controller Track Guidance (Track Leader) Machine control Condition: Used Display functional (menu visible) Normal signs of wear on the case Year of manufacture 2005 Auction-ID: A7-46606-1007
Machine number: 6750296 max. load: 450 kN Throat: 230 mm Plunger strokes: 80 1/min Plunger adjustable: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 kW Voltage: 380 V Table dimensions: 700 x 520 mm Auction-ID: A7-46287-30
Machine number: 896471 Pressure capacity: 5000 kg Throat: 115 mm Plunger strokes: 165 1/min Adjustable plunger: 40 mm Stroke adjustable: 0 - 50 mm Motor power: 0.75 hp Table dimensions: approx. 280 x 220 mm with pneumatic punching tool installed Auction-ID: A7-46287-199
Press force: 25 t Throat depth: 190 mm Slide strokes: 80/min Slide displacement: 50 mm Stroke adjustable: 8 - 80 mm Operating voltage: 380 V Connection: 3 hp Table dimensions: 570 x 430 mm Auction-ID: A7-46287-150
Machine number: 3140295 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 10 - 100 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-21
Machine number: 24141278 largest stroke: 250 mm Max. compressive force: 1000 kN Drive power: 15 kW Operating voltage: 380 V Table dimensions: 645 x 695 mm Auction-ID: A7-46287-20
Machine number: 0820592 max. load: 25 kN Throat: 90 mm Plunger strokes: 75 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Motor power: 0.25 kW Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-215
Machine number: 473678 Delay time: 69 ms Safety distance for hand control tool: 110 mm Table dimensions: 700 x 525 mm Auction-ID: A7-46287-17
Machine number: 4801178 max. load: 450 kN Throat: 230 mm Lifts: 110 1/min Lifts adjustable: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 3 kW Table dimensions at the bottom: approx. 700 x 460 mm Table dimensions at the top: approx. 380 x 180 mm with a feed device Auction-ID: A7-46287-182
Pressure capacity: 35,000 kg Plunger strokes: 110 1/min Throat: 220 mm Plunger adjustable: 50 mm Stroke adjustable: 0 - 70 mm Motor power: 3 hp Voltage: 220/380V Table dimensions: 550 x 460 mm Auction-ID: A7-46287-23
Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm Auction-ID: A7-46287-28
Machine number: 2810292 Operating voltage: 380 V Connection: 1.5 kW Max. pressing force: 250 kN Projection: 190 mm Plunger strokes: 120/min Plunger adjustable: 5 mm Stroke adjustable: 4 - 60 mm Table dimensions: 550 x 430 mm incl. straightening device from the manufacturer REBENDER Auction-ID: A7-46287-156
Machine number: 2561290 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 8 - 80 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-22
max. load: 25 kN Projection: 90 mm Plunger strokes: 220 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-210
Built-in shelf , Max. shelf load: 2800Kg Max bay load: 5600 kg Multipal-S Pallet Racking Auction-ID: A7-46802-7
Consisting of NORAXON Desktop DTS with sensor package, 1x NORAXON MyoMotion Research Pro module incl. High Speed 16 system, incl. 1x force plate, 1x laboratory computer tower PC, 1x SAMSUNG S27D390H monitor, 1x keyboard, 1x mouse and 1x LG 43UK6400PLF TV with LOGITECH HD camera, software applications available, without SPORT VOSS tapping test device Auction-ID: A7-46661-3
Projection: 220 mm Clamping surface: 580 x 440 mm Width and depth Ram strokes: 110 1/min Stroke adjustable: 4-70 mm Table adjustable: 180 mm with double table spindle, including new built-in control from Müller and 1 x Kemeric type: 4 VAEK decoiler + double tool holder for original Trumpf tools. Auction-ID: A1-46862-22
Masonry scaffolding trestles MÜBA K3 galvanized, load 1,500 kg, 2 pcs., with 4 booms BAUMANN
An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example.
Accessories for Müba wooden fence stands, consisting of: 40 pieces Attachment, Holding Profile, Slider, long (L90 x W20 x D8cm) 8 pieces Attachment, Holding Profile, Slider, short (L57 x W20 x D8cm) Item price SO000403 Auction-ID: A1-46973-201
2 pieces of Müba multi-purpose pallets, stacking barels, stacking racks for e.g. masonry scaffolding trestles, etc. Clear dimension between the spars 0.66m long x 0.52m wide x 0.94m high, 1 piece painted and 1 piece galvanized. Manufacturer's article number: - Galvanized: 15409 - Painted: 15400 Condition: see pictures. SO001349 Auction-ID: A1-46973-115
approx. 30 pieces Müba Bracket Scaffold Hook-in Shoes, Hook-in Pockets, galvanised SO001039 Auction-ID: A1-46973-318
maximum number of results exceeded
please refine your search
7.500 € 
