my way used for sale

Several used ARI 3 – way control valve with Belimo servomotor 24V DN 80 / PN 6

-Three-way cock MWM 12022945 - Suitable for several motors - Please note! Price per piece! - 1202 2945 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new ...

Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Nomina ...

Three-way valve with pneumatic actuator AMG SAF020 F07-17/45 RS20A16A DN25 Flange 115 mm Flanges VA Dimensions: 320 x 240 x 200 mm

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, hydraulic valve -Manufacturer: Herion, hydraulic directional control valve p max 315 bar -Type: S6VH10G15900160V -Dimensions: 155/45/H70 mm -Weight: 1.9 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Manufacturer: Bosch -Type: 0 820 230 001 -Quantity: 1x valve available -Weight: 0.15kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 022 992 -Number: 1x available -Weight: 0.3 kg

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

4/2 way valve, solenoid valve, hydraulic valve, air valve, pressure valve, valve block, control block -Manufacturer: Pister -Type: 0/1013 12V -Type: 6/90 -Number: 22x valves available -Price: per piece -Dimensions: 160/95/H50 mm -Weight: 2.3 kg

Three-way valve with pneumatic actuator MECAFRANCE, MF DN25, PN40 Mounting dimension: 163 mm Flange diameter: Ø 115 / 70 mm , Bolt circle diameter: Ø 85 mm Material: stainless steel pneumatic actuator: AMG SAF020 F07 DBP 1601746 Control pressure: max. 10 bar New !' Dimensions: 185 x 160 x 310 mm

One-way light barrier, optosensor -Item no.: 50081336 -10-30 V DC -Price: per piece -Number: 8x available -Weight: 0.1 kg

One-way light barrier, optosensor -Item no.: 50081336 -10-30 V DC -Price: per piece -Number: 4x available -Weight: 0.1 kg

3/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: PD 37786 Price: per piece -Quantity: 2 available -Weight: 0.3 kg

Stainless Steel 2-Way Ball Valve A+R KH530-33-ETE DN80 PN16 Mat. 1.4408 (V4A) DIN3357 flange Ø 200 mm stainless steel ! Dimensions: 310 x 200 x 240 mm

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmWeight approx.3000 KgDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: MF 04 520-HN -Price: per piece -Quantity: 4 available -Weight: 0.2 kg/piece

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Number: 8 available -Weight: 0.6 kg

Gearbox, bevel gear, worm gear -Manufacturer: DZ transmissioni, double bevel gear -Translation: i = 1:1 -Shafts: Ø 20 x 50 mm -Rotation direction: counter-rotating, see photo -Dimensions: 410/240/H75 mm -Weight: 7.5 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Type: DG4V-3-6C Quantity: 1 piece available -Weight: 2.5 kg

4/2-way valve, solenoid valve, hydraulic valve, air valve, pressure valve, valve block, control block -Type: DG4V-3 2A MU H7 6Q -Weight: 2 kg

3/2-way valve, mini solenoid valve, solenoid valve, pneumatic valve, air valve, pressure valve Valve block, control block -Type: 6012-C-1,2-FB-PA Price: per piece -Quantity: 6x Available -Weight: 0.2 kg

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Quantity: 2 available -Weight: 0.6 kg

3/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 400 004 Price: per piece Quantity: 5 available -Weight: 0.4 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 231 004 -Price: per piece -Quantity: 1x Available -Weight: 0.3 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 015 025 -Number: 1x valve available -Price: per piece -Weight: 0.7 kg

Four-way head spindle, galvanized Four-way head spindle for height-adjustable and tilt-proof connection of shoring and superstructure with one or two H20 formwork girders. 10.4 kg EUR 38,70 per piece 4-way screw-jack head 4 way screw-jack head for height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two H20 beams. 10.4 kg EUR 38,70 per piece

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 235 101 Price: per piece Quantity: 3 available -Weight: 0.3 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 221 012 -Price: per piece -Quantity: 2 available -Weight: 0.5 kg/piece

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 022 503 Price: per piece Quantity: 5 available -Weight: 0.4 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: EB5 DW -Price: per piece -Quantity: 1 available -Weight: 3.6 kg

Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: VL-5-1/2 -Quantity: 1 available -Weight: 1 kg

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax. Turning Length300 mmMax machining diameter320 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmWeight approx.8000 KgMovements X / Z210/810 mmCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

all keys available Auction-ID: A1-47205-465

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar holder, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change tool post, 4-way turning tool post, quadruple tool post, 4-way quick-change tool post -Quick-change tool holder: 4-way quick-change boring bar holder -Recording dimensions: see photos -Clamping height: 59/34 mm -Clamping length: 200 mm -Dimensions: 330/200/H285 mm -Weight: 30.3 kg.

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: ABB ASEA, double hydraulic unit -Hydraulic pump 1: Motor ABB 3 kW 150 bar -Flow rate: 15 l/min, with pressure switch, pressure accumulator and filter -Hydraulic pump 2: ASEA motor 0.37 kw / 100 bar / 0.8 l/min -Hydraulic tank: with temperature/level indicator -Individual components: see photos -Dimensions: 785/570/H785 mm -Weight: 203 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min -Individual components: see photos -Dimensions: 760/435/H825 mm -Weight: 206 kg

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

N.50,000 pieces packaged in bags of 1,000 pieces each; n.50,000 pieces in packs on taped reels Auction-ID: A1-46617-42

Boxes of 30 meters each for a total of 2310 meters Auction-ID: A1-46617-37

Sofa set WAYFAIR red 2-seater, 2 chairs, coffee table, purchased in 2020 for 517,23 EUR net

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Rc-R5FnecB0 - Former Linde full-service device - Valid service until 01/2027 - Valid UVV until 01/2027 - Battery: 04/2020 80V 775 Ah, with very good performance, measured with 83.1V - Full cabin with radio, heater and windshield wipers - 3rd + 4th valve; 4-fold fork adjuster with side shift - Facelift model with tilt angle display (practical for sensitive goods) - Mast position memory via switch in front of the joysticks Auction-ID: A1-45453-147

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-43891-9

Viewing by appointment Extra options : Lighting , Freelift , Spoon adjuster Auction-ID: A1-43891-40