mwm engine used for sale

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

JPC HT18 mini excavator with KUBOTA 3-cylinder MOD D722 engine, liquid-cooled, equipped with extendable undercarriage, boom swing, zero tail swing rotation, control joystick, hammer attachment, digital controls, year 2024, never used - 0 hours Overall dimensions: 2500 x 1100 x 2500 mm Weight: 1700 kg Auction-ID: A7-50066-383

JPC HT18 mini excavator with KUBOTA 3-cylinder MOD D722 engine, liquid-cooled, equipped with extendable undercarriage, boom swing, zero tail swing rotation, control joystick, hammer attachment, digital controls, year 2024, never used - 0 hours Overall dimensions: 2500 x 1100 x 2500 mm Weight: 1700 kg Auction-ID: A7-50066-398

engine lathe, year 2007, CNC 840 D. Used machine. More info & price on IndustrialBuyer.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of Manufacturing: presumable 2018

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm. • centre distance over bed: 300 mm • centre distance over support: 200 mm

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters. Additional technical specifications: • Center height over bed: 200 mm • Center height over support: approx. 110 mm • Center height over cross support: approx. 90 mm

• centre length: 1000 mm • centre height over bed: approx. 250 mm • centre height over support: 150 mm • Incl. steady rest.

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of manufacturing: presumable 2018

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONES ...

Technical data: Suitable for cable drums with Ø 150–850 mm Gripper function Tilt range forward/backward: 0–90° Rotation range left/right: +90° / -90° Electro-hydraulic operation Used condition with signs of wear due to age. Battery: HOPPECKE trak bloc 70, 12 V, 70 Ah Auction-ID: A1-50529-81082

engine lathe, year 2007, CNC 8055 TC. Used machine. More info & price on IndustrialBuyer.

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 205 mm, 410 mm

1 gebr. LZS Lathe, TOS SN40B x 1000 mm Technical data (TOS SN 40 B) Center width: approx. 1,000 mm Center height: approx. 205 mm Circumferential diameter over bed: approx. 420 mm (hence the designation "SN 40") Circumferential diameter over flat lower saddle: approx. 225 mm Circumferential diameter in the offset: approx. 600 mm (if equipped with removable bridge) Bed width: approx. 400 mm ⚙️ Spindle & Feeds Spindle bore: approx. 52 mm (ideal for common rod diameters) Spindle mount: DIN 55027 Gr. 6 (with bayonet lock) Speed range: Steps graded, usually from approx. 11 to 2,240 rpm (in several steps via gearbox) Power of the main motor: approx. 6.6 kW (powerful industrial drive) Dimensions & Weight Machine weight: approx. 1,800 kg to 2,100 kg (depending on tip width) Space requirement (L x W x H): approx. 2,500 x 1,000 x 1,350 mm (with 1,000 ...

Key data: 4700 , 600

For sale complete installation 2x diesel generator set 1x Generator set Brand: MAN Type: 8L 40/45 Year: 1998 Power: 5832 KVA Alternator: Leroy Somer 1x Generator set Brand: MAN Type: 6L 40/45 Year: 1994 Power: 4265 KVA Alternator: AVK The equipment included with this installation can be seen in the photo More photos on request

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Never used / sold in original carton Auction-ID: A1-50556-274

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

Mint condition, unused Engine Type: Kubota D1105 Diesel Engine 3 cylinders, water-cooled Power: 25 hp Starter System: Electric Start Details: - Nominal load capacity: 300KG - Maximum load capacity: 600KG - Bucket volume 0.16 m³ - Gradeability 28 % - Maximum dumping height: 1550 mm - Maximum loading height: 2530 mm - Travel speed: 3 - 6.5 km/h - Flow rate (hydraulics) max. 112.5 L/min Equipment / Features: - Built-in tank, can be filled from the outside - 3 additional hydraulic lines (e.g. for hydr. sweeper, chisel hammer, etc.) - Front loader with bolts and bushings Auction-ID: A1-50625-2

1.3 operating hours Details: - Chain drive - Joystick control - Maximum loading height: 2260 mm - Maximum dumping height: 1725 mm - Travel speed: 0–8 km/h Engine Type: - Kubota D1105 diesel engine - 3 cylinders, water-cooled - Power: 25 hp Auction-ID: A1-50625-4

With a total width of only 88 cm, this machine is particularly suitable for gardens, renovation projects, narrow passages and other locations where larger excavators are difficult to use. The machine is equipped with a swivel stick (side swing), which allows the boom to be hydraulically placed sideways. This makes it possible to work closer to walls, fences, foundations and other obstacles. The DLM950 is powered by a 7.0 kW KOOP motor - maximum digging depth: 1,715 mm, maximum digging height: 2,600 mm and maximum digging reach: 3,065 mm - supplied with a 400 mm wide digging bucket with a capacity of 0.022 m³. The rubber tracks are 180 mm wide and combine good stability with limited loads on paved surfaces. At the front there is an 840 × 240 mm dozer/stabilizer blade, suitable for grading, pushing back soil and extra stability during operation - The machine also has joystick control, ho ...

Features: - As good as new - Swivel arm (side boom) - Hydraulic front control - Built-in tank - 1 additional hydraulic circuit - Hoses protected in the excavator arm Details: Year of production: 2026/02 Net weight: 790 KG Machine width: 747mm Machine height 1594mm Digging depth: 1001mm Bucket Radius: 2565mm Dumping height: 1569mm Engine Type: Kubota Z482 2 cylinders, water-cooled Power: 11.2 hp Starter System: Electric Start Auction-ID: A1-50625-3

Recently received maintenance and knives have been sharpened. Ready to use without papers. Auction-ID: A3-46130-17006

Key data: 1025 KW, 1800 1/min

In very good condition Rotating Removed due to scrapping of ship The engine has made an overhaul of the piston liners and head at 72,000 hours of rotation

Features: - As good as new - Swivel arm (side boom) - Adjustable landing gear 92cm - 121cm - Hydraulic pilot control - Built-in tank - 2 additional hydraulic circuits - Hoses protected in the excavator arm Details: Year of production: 2026 Digging depth: 1980mm Bucket radius: 3233mm Dumping height: 2247mm Engine Type: Kubota Z482 2 cylinders, water-cooled Power: 11.2 hp Starter System: Electric Start Auction-ID: A1-50625-7

KNUTH Basic Plus L&Z Lathe /Year 2011 -Tip height 150mm -Max turning diameter 300mm -Max turning diameter over support 178mm -Max. turning diameter without bridge 430mm -Tip width: 810 mm -Spindle bore: Ø 38 mm -Spindle speed: 60–1,550 rpm, 9 steps -Automatic longitudinal/plane feeds -Spindle mount: Camlock D1-4" -Tailstock cone: MK 3 -Quill stroke: 100 mm -Bed width: 180 mm -3-axis digital display -Multifix quick-change holder with insert -Electric lining protection -Work light -Rotating center punch tip -3-jaw chuck -2x bezels -Documentation Dimensions: LxWxH 1.6x0.7x1.2 meters / Weight 520Kg

With a total width of only 88 cm, this machine is particularly suitable for gardens, renovation projects, narrow passages and other locations where larger excavators are difficult to use. The machine is equipped with a swivel stick (side swing), which allows the boom to be hydraulically placed sideways. This makes it possible to work closer to walls, fences, foundations and other obstacles. The DLM950 is powered by a 7.0 kW KOOP motor - maximum digging depth: 1,715 mm, maximum digging height: 2,600 mm and maximum digging reach: 3,065 mm - supplied with a 400 mm wide digging bucket with a capacity of 0.022 m³. The rubber tracks are 180 mm wide and combine good stability with limited loads on paved surfaces. At the front there is an 840 × 240 mm dozer/stabilizer blade, suitable for grading, pushing back soil and extra stability during operation - The machine also has joystick control, ho ...

Features: - As good as new - Swivel arm (side boom) - Adjustable landing gear 92cm - 121cm - Hydraulic pilot control - Built-in tank - 2 additional hydraulic circuits - Hoses protected in the excavator arm - 30cm tooth shovel - Hydraulic thumb - Quick coupler with eyelet Details: Year of production: 2026 Digging depth: 1980mm Bucket radius: 3233mm Dumping height: 2247mm Engine Type: Yoop (Co-op) 192F 1 cylinder, air-cooled Power: 10.2 hp Starter System: Electric Start Auction-ID: A1-50625-8

Sale used table cooler Cooler was built up for 3 months.

Mint condition, unused Engine Type: Kubota Z482 Diesel Engine 2 cylinders, water-cooled Power: 11.1 hp Starter System: Electric Start - 2.5 additional hydraulic lines (e.g. for hydr. sweeper, chisel hammer, etc.) - Front loader with bolts and bushings Technical data / details: - Net weight: 890 KG - Nominal load capacity: 175 KG - Maximum load capacity: 400 KG - Climbing ability 25 % - Maximum dumping height: 1553 mm - Maximum loading height: 2080 mm - Flow rate (hydraulics) max. 72 L/min Auction-ID: A1-50625-1

In fully functional condition. With registration certificate. It has already been restored, repainted + new forks. Auction-ID: A3-46133-17234

225x127x155 No keys available for shutters No coc present Trailer 750kg Auction-ID: A3-46132-11445

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

- Toyota Forklift / Forklift - Propulsion: Gas / LPG - Engine: Toyota 4P gas engine - Engine number: 4P0004697 - Serial number: 11045 - Operating weight: approx. 2.6 t - Equipped with Kaup lifting device - Lift mast with hydraulic lifting function - Fork carriage with two forks - Pneumatic tyres - Overhead guard - Driver's seat with seat belt - Lighting and exterior mirrors available - Manual control levers for travel and hydraulic functions - Rear-mounted gas cylinder - Classic Toyota instrumentation - Paintwork: Red - Visible signs of wear due to age and service life - Paint chips, scratches and corrosion build-up, especially on the lift mast, forks and bodywork - Forks with clear superficial traces of rust and wear - Engine compartment and aggregates with age-appropriate soiling - Tires optically used - Seat and controls with signs of wear - Year of construction and ...

Lazer self-propelled ride-on mower equipped with a Briggs & Stratton 344 cc petrol engine and grass collection container. The bike is EU Stage II compliant and has a production date of December 2013. The ride-on mower starts, but currently no longer goes into gear and therefore cannot drive. The engine is working. Repair/inspection of the drive is required. See photos for a further impression of the execution and condition. Auction-ID: A3-46134-22113

Mobile Hydraulic Engine Crane – 1,000 kg Mobile folding workshop crane with wheeled steel frame, hydraulic lifting ram, adjustable boom, chain and hook. Power: Manual hydraulic Maximum lifting capacity: 1,000 kg Rated boom positions: 1,000 / 750 / 500 / 250 kg Configuration: Folding wheeled frame with hydraulic ram, adjustable boom, chain and hook Certification: CE marked Application: Lifting and handling engines, machinery components and similar loads Condition: Used Approximate dimensions: 1,500 × 1,000 × 1,600 mm Approximate weight: 75 kg All descriptions are indicative only. Auction-ID: A1-50546-83

General Description Conventional geared engine lathe designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces. The machine is equipped with a geared headstock, manual carriage and tailstock for general machining applications. Technical Details Machine type: Geared engine lathe 3-jaw chuck Tailstock Drill chuck mounted in tailstock 4-way toolpost Threading gearbox Feed gearbox Working carriage assembly Condition Used industrial condition. The machine appears complete with chuck, tailstock, toolpost, carriage and gearbox assemblies. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-30

- Manufacturer: Renault - Model: Trafic - Vehicle type: Panel van / van - Year of manufacture / first registration: 2003 - Fuel: Diesel - Displacement: 1,870 cm³ - Power: 60 kW / approx. 82 hp - Transmission: Manual - Drive: Front-wheel drive - Trailer hitch available - Mileage currently not readable - Last documented oil change according to the trailer: 05/2023 at approx. 183,871 km - Used, age-appropriate condition - Various traces of use, scratches, rust and bodywork available - Damage / deformation visible in the area of the front fender - Driver's seat clearly damaged - Interior with strong signs of wear - Cargo space with wood paneling and clear signs of wear - Vehicle condition see pictures - Functional and driving readiness Engine does not start. Engine damage Auction-ID: A1-50785-3

Delta Technics Engineering cold room with MCS-17 cooling installation, built in 2011. Equipped with digital ALFA 735 temperature control, interior lighting and separate control for cooling operation. The installation works at 230 V / 50 Hz. The cold store is working and cools properly. A cold store temperature of 3°C is indicated on the control. Rating plate data: serial number 02943, test pressure 33 bar and pre-pressure 4 bar. See photos for a further impression of the execution and condition. Auction-ID: A3-46133-22107

KESSER SY-320 Inflatable Boat with Hangkai 3.6 Engine Very nice set composed of a KESSER SY-320 inflatable boat and its Hangkai 3.6 outboard motor, ideal for outings on the water, fishing or family leisure. The boat has a nice grey and orange suit and has a rigid floor, offering more stability and comfort on board. It is equipped with two benches, two oars with their supports, carrying handles and a rope around them. The boat is approved in category C and designed to accommodate up to 4 people. The manufacturer's plate indicates a maximum load of 505 kg and a maximum permissible engine power of 11.2 kW / 15 HP. The set is offered here with a Hangkai 3.6 outboard motor, installed on the transom. Control directly from the handle for simple and practical use. Highlights: KESSER inflatable boat Model SY-320 Length: approx. 3.20 m Capacity: 4 people Maximum load: 505 kg Categ ...

AKM/Laskar BSM-1500-1000G-1K-1 automated spot welding installation, year of construction 2023, suitable for professional spot welding applications. The installation is in very neat condition, has only been used to a very limited extent and works perfectly properly. The last maintenance was carried out in March 2025. All accompanying manuals are present and are included. In addition, various important accessories and parts for the welding equipment are included, as shown in the photos. These parts are part of the lot. See photos for a further impression of the machine, the supplied accessories and the general condition. Auction-ID: A3-46133-22119

With a total width of only 88 cm, this machine is particularly suitable for gardens, renovation projects, narrow passages and other locations where larger excavators are difficult to use. The machine is equipped with a swivel stick (side swing), which allows the boom to be hydraulically placed sideways. This makes it possible to work closer to walls, fences, foundations and other obstacles. The DLM950 is powered by a 7.0 kW KOOP motor - maximum digging depth: 1,715 mm, maximum digging height: 2,600 mm and maximum digging reach: 3,065 mm - supplied with a 400 mm wide digging bucket with a capacity of 0.022 m³. The rubber tracks are 180 mm wide and combine good stability with limited loads on paved surfaces. At the front there is an 840 × 240 mm dozer/stabilizer blade, suitable for grading, pushing back soil and extra stability during operation - The machine also has joystick control, ho ...