multilift used for sale

Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 520C 1600-350 with Multilift Control Selogica Year of manufacture: 2001 operating hours: 55400 h constantly maintained (until 2022 by Arburg) Special features/extras: -Multilift Robot Closing side: Clamping force: 1600 kN/ 160 tons tie bar size hxv 520 x 520 mm platen size hxv: 728 x 728 mm Installation height min: 250 mm platen distance max: 900 mm opening stroke: 650 mm ejector stroke: 225 mm ejector force: 66 kN Injection side screw diameter 45 mm Stroke volume 230 ccm injection weight: 210 gr./hp injection pressure: 1670 bar dimensions: 5750 x 1950 x 2350 mm (L x W x H) Weight: 6.500 kg. - from week 48 2022 immediately available in our warehouse Hannover/Germany - Function tested (guaranteed function until first start-up)

This ARBURG 320 C 500-100 + Multilift H with B-Axis Injection moulding machine was manufactured in 2003 in Germany. It has a clamping force of 500 kN and a screw diameter of 30 mm. The distance between platens is 550 mm and the opening stroke is 350 mm. In total it operated 64000 pump hours. The injection moulding machine comes with a Multilift H with B-Axis, featuring a handling weight gripper plus part weight of max. 5 kg and a swivel range B-axis of 90 degrees. See original tech specs (DE) attached as PDF below.

Arburg 270C-400-250 + robot Multilift and conveyor belt (3) Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 97 Injection Pressure [bar]: 2470 Clamping Force [kN]: 400 Tie Bar Distance [mm]: 270x270 Platen Size [mm]: 446x446 Mould Height min. [mm]: 200 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 18,4 Workinghours [h]: 75000 Dimensions [m]: 4 x 2,2 Weight [kg]: 1980kg + 300kg robot CR - CORE PULL R - ROBOT

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. The machine has a clamping force of 3200 kN and a srew diameter of 60 mm.

Stock No.: 503129 Manufacturer: ARBURG Type: Allrounder 370 C 800-350 Control: Selogica Year of construction: 2002 Operating hours: 65000 h Technical data closing page Clamping force: 800 kN Holmass v: 370 mm Holmass h: 370 mm Panel size h: 570 mm Panel size v: 570 mm Installation height min.: 250 mm Plate pitch max.: 750 mm Opening distance: 500 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 139 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 min Screw torque: 560 N Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dimensions LxWxH: 4.24m x 2.45m x 2.1m Total weight: 3460KG Equipment On-screen text german Compact Flash Drive Core pull hydraulic 2x Air ...

Manufacturer: Arburg Type: 470 C 1500 - 350 Year of construction: 2005 Control: Selogica Closing type: Hydraulic Closing force: 1500 kN Tie bar spacing: 470 mm x 470 mm Plate size: 650 mm x 650 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 ccm / 210 gram PS Injection pressure: 1670 bar general Engine: 30 kW Heating: 10,2 kW Dimensions: 4.9 m x 1.7 m x 2 m Weight: 4600 kg Screen text: German Optional extras Robot Arburg Multilift + 100mm column extension El. Dosing + LGS 6 heating control points Robot interface Core train x1

Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.

Key data: 2500 , 60

warehouse no.: 503407 manufacturer: ARBURG type: Allrounder 630 H 2500-1300 controller: Selogica direct year of construction: 2019 operation hours: 5186 h clamping force: 2500 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 900 mm min. mould height: 400 mm max. mould height: 950 mm max. open daylight: 1500 mm opening stroke: 550 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing technical data robot-system handling type: Linear manufacture: ARBURG controller: MULTILIFT V year of construction: 2019 Z axis: 2000 mm measures of machine lxbxh: 7.2m x 2.1m x 2.2m total weight: 14000KG

Injection moulding machine ARBURG Allrounder 630 H 2500-1300 Stock No.: 503408 Manufacturer: ARBURG Type: Allrounder 630 H 2500-1300 Control: Selogica direct Year of construction: 2019 Hours: 3517 h Technical Data Closing Page Clamping force: 2500 kN Holm v: 630 mm Holm h: 630 mm Plate size h: 900 mm Plate size v: 900 mm Min. installation height: 400 mm Installation height max.: 950 mm Plate spacing max.: 1500 mm Aperture travel: 550 mm Ejector stroke: 225 mm Ejection force: 86 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 60 mm Displacement: 678 ccm Spray pressure: 2000 bar Auger length: 20 l/d Auger stroke: 235 mm Screw speed: 60 min Worm torque: 1640 N Number of heating zones: 8 Nozzle travel: 550 mm Dimensions & Weight Machine dimensions LxWxH: 7.2m x 2.1m x 2.2m Total Weight: 1 ...

Key data: 2200 kN, 60 mm

warehouse no.: 503302 manufacturer: ARBURG type: Allrounder 570 S 2200-1300 controller: Selogica year of construction: 2009 operation hours: 25044 h clamping force: 2200 kN distance between tie bars h:: 570 mm distance between tie bars v:: 570 mm size of mould plates h: 795 mm size of mould plates v: 795 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 60 mm swept volume: 664 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 3x machine incl. hopper loader machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system handling type: Linearhandling manufacture: Arburg controller: Multilift year of construction: 2009 handling weight: 15 kg X axis: 700 mm Y axis: 1000 mm Z  ...

Key data: 700 kN

Arburg 320K 700-250 with the Arburg Multilift H lateral robot Year of construction: 2005 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air valve x 3 Control with hot runners Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On req ...

Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.