multi spindle lathe used for sale

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Holzher feeder, Motor 380 volt, 0.7 Kw Three rubber feed rollers 120 mm x 60 mm 8 different speeds. Auction-ID: A1-48994-27

Equipped with emergency stop button, bottom and top top extraction 80 mm, milling guide with left and right fine adjustment of the guides, milling spindle speed 3800 – 5400 – 7200 – 9000 rpm. With thermal motor protection. Auction-ID: A1-48994-9

Technical data Manufacturer: KUKA Type: KR 125/1 Product no.: 0001490176 Serial Number: 721142 Date of manufacture: 1996-09 Weight: 975 kg Axles: 6 Nominal payload: 125 kg Repeatability: 0.2 mm (Source: Online Research) Working radius: 2,400 mm (Source: Online Research) Degree of protection: IP64 (Source: Online research) Working space volume: approx. 39 m³ (source: online research) Configuration Control: KUKA KR C2 MP5 Control panel: KUKA KCP2 Software: KUKA System Software (KSS) Release 5.2 Machining spindle: HSD, liquid-cooled, 380 V, 400 Hz, 12,000 min⁻¹, S1 6.5 kW, 15 A, IP64, 4-pole, 29 kg Accessories: Tool/clamping holders, connection and supply components as well as KUKA documentation and data carriers. Note Some of the technical information has been supplemented on the basis of verified online sources and marked accordingly in each  ...

Equipped with manual spindle lock, Top blade extraction 120 mm. Auction-ID: A1-48994-13

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left with table top extension of 500 mm per side. The total tabletop width is then 1530 mm. With automatic star triangle start switch and with motor brake. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. Both with thermal motor protection. With manual pin for spindle locking. This cutter is fully equipped for milling round work and has an extra Aigner milling cap. Equipped with a SUF pressure protection standard with different pressure rings and guides. Steff feeder type 38,  ...

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left and right with table top extension of 500 mm per side. The total table top width is then 2030 mm. With automatic star triangle start switch and with motor brake. At the front a pull-out support guide, which is 540 mm extendable. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Univer supply device, type 508, 380 volt and Motor 0.75 Kw equi ...

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left with table top extension of 500 mm, right with a narrower table extension of 670 mm. The total table top width is then 2200 mm With automatic star triangle start switch and with motor brake. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Univer supply device type 508, built in 1996, Motor 380 volts 0.75 Kw. three rubber feed rollers D= 10 ...

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Auction-ID: A1-48994-3

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Feeder type SK32FD, Motor 380 volt, 0.25hp, Year of construction 1994, 8 feed speeds, Rubber feed rollers 80 x 55 mm. Auction-ID: A1-48994-19

1.5kw, 1420 rpm. With two abrasive hedgehogs, one piece D = 150 mm H = 120 mm, and one piece D = 100 mm H = 120 mm. Auction-ID: A1-48994-47

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left and right with table top extension of 500 mm per side. The total table top width is then 2030 mm. With automatic star triangle start switch and with motor brake. The milling spindle can be tilted from -10 to + 45 degrees. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Holzher feeder type ETX, 380 volt, Motor 0.75 Kw, heavy version with 3 ...

Martin T25 tilting table spindel moulder with 2-axl electric positioning Manufacturer: Martin Type: T25 M-Nr.: V172604 Year: 1990 Motor: 5/6 kW (2 RPM drive motor) Tilting: -5° – +45° Spindle diameter: 30 mm Spindle elevation: 150 mm (electrical adjustment) Rotation speed: 3000/4500/6000/9000 U/min (2 RPM drive motor) Spindel pick-up: MK5 Table: Table extension 2.500mm with extendable support (pull-out for wide workpieces) Softstarter: Automatic spindel softstart/- braking Control panel: Eye-level with digital read-out Spindel elevation: 150 mm elelvation electric with digital read-out Spindle tilting: ‘-5° – +45° Electric with digital read-out Feeder: Five-pole socket via central control Condition: Fully functional Optional: Aanvoerapparaat: Not included Aigneraanslag: Not included

CASADEI F114 spindle moulder Manufacturer: Casadei Type: F114 M-Nr.: 01-66-183 Year: 2001 Control: Spindelhoogte: handwiel verstelbaar met digitaal-analoge uitlezing Freesaanslag: handwiel met digital-analoge uitlezing Frees aanlag invoerzijde: handwiel verstelling met digitaal-analoge uitlezing (spaanafname)

Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM Manufacturer: Martin Type: T26 with 7.5 kW frequency controlled spindle RPM Machine Nr.: 20000 Year: V415216

Martin T26 tilting table spindel moulder with 2-ax electric control and 7.5/9.5 kW 2-speed motor Manufacturer: Martin Type: T26 M-Nr.: 2005 Year: V453599 Control: electrical spindel-elevation, -tilting,-feeder elevation, manual fence positioning with digital reading Control panel: machine stand Motor: 7.5/9.5 KW 2-speed motor rpm Spindel : ø40 mmSK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: 2-speed motor 7.5/9.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: 1255 x 900 x 95 mm from cast iron Ax-control: 1. Digital-electric controlled spindle height setting, with automatic milling dept. Compensation when spinlde is tilted 2. Digital-electric controlled spi ...

Martin T21 Manufacturer: Martin Type: T21 Year: Motor: 4 KW Table: 1.000930 Table height: 850 mm Konus spindle: MK5 Spindel height adjustment: 150 mm RPM: 3000/4500/6000/9000 U/min Spindle: 40 mm Max. tool diam.: 250 mm Weight: 700 KG Brake: Footbrake Dust collection: ø120 ø100 mm

Martin T25 tilting table spindel moulder with 5-axl CNC control Manufacturer: Martin Type: T25 M-Nr.: V252368 Year: 1998 Motor: 7.5/9.5 kW oder 10/13 BHP, 2 RPM Dalander motor Tilting: -5° till +45° Spindel diam.: 30 mm Spindel pick-up: ISO-quick change Spindel elevation: Spindle height adjustment: 150 mm Rotation speed: 3000/4500/6000/9000 U/min Table: Table extension 2.400mm with extendable support (pull-out for wide workpieces) Control panel: CNC control at eyes height with LCD screen Spindel elevation: CNC-controlled with electric elevation (programm controlled of hand switch setting) Spindel tilting: CNC-controlled with electric tilting, angle: -5° +45° (programm controlled of hand switch setting) Fences: CNC-controlled with electric positioning vs. spindel position (programm controlled of hand switch setting) CNC-controlled with electric positioning infeed vs. outfeed fence (pr ...

MARTIN T27 FleX with 4-ax CNC control + 5-ax manual controlled but integrated in central control + electric feeder elevation Year: 2007 Tilting: from -46° to +46° T27FX/1-a: T27 FleX tilting spindle moulder CE-norm with 7,5KW/10 HP motor and variable speed – frequency controlled CNC controlledspindle elevation CNC controlled tilting with automatic height adjustment when tilted T2704-a: Motor 9,5KW/13 HP motor and variable speed – frequency controlled rpm 1.000 – 12.000 tpm., incl. collission control T2711-a: Infeed fence manually controlled with digital counter, whereas position is integrated in central control linked T2712-a: CNC controlled fence positioning (left& right hand-side combined) T2714-a: CNC controlled table opening (programm integrated for tools Ø70 upto 250 mm T2715-a: Electric controlled feeder elevation-product thickness T2731-a: Table extension at infeed-outfee ...

Martin T26 tilting table spindle moulder with CNC 4-ax control Manufacturer: Martin Type: T26 CNC Year: 2002 Control: 4-ax CNC Control Control panel: eye-level Remark: Special paint Martin 75 Years Ral 7035& 6004 Motor: 7.5/9.5 kW – twin-speed motor Tilting: -45 tot + 45° Spindel diam.: ø40 mm spindel SK40 – Dornfix-quick change Spindel elevation: Electric spindel elevation 150mm (2 speed) Spindel elevation Electric-pneumatic spindel lock (Tool changing) Central greasing Rotation speed: Twin-speed 3000-6000 rpm or 4.500-9000 rpm, electronic display, electric -automatic brake Spindel pick-up: Dornfix-quick change spindel Table: Table extension, infeed and outfeed 2405mm long, frontside support 3000mm long, frontside extension 700mm Control panel: 1. CNC-controlled spindel elevation, with automatic dept and height control when spindle is tilted 2. CNC-controlled spindel tilting, with ...

Panhans 245 Easy Tilting spindlemoulder Manufacturer: Panhans Type: 245 Easy M-Nr.: 3003 Year: 2008 Control: 2-ax electrical controlled, spindle elevation and -swivelling, Handwheel controlled rearfences vs. spindel with digital counter reading and handwheel controlled right vs. left fence setting with digital counter. Control panel: Eye level, ergonomic turning Remark:

Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM and tenon table Manufacturer: Martin Type: T26FleX M-Nr.: 2000 Year: V409217 Control: Control at eye level: spindel-elevation, -tilting, infeed fence positioning, rpm-setting Control panel: Panel at eye-level, swivelling for operator comfort Motor: 7.5kW (10 BHP) with frequency controlled motor rpm Spindel : SK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Spindle elevation referencing tool 0-position Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: Frequency controlled 7.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: Table ext6ension infeed side and tenontable outfide, that can also be used as table ext ...

MARTIN T27 FLEX tilting table spindle mouder: +/- 46º plus 2 CNC controlled axes Brand: Martin Type: T27Flex M-Nr.: V528804 Year: 2014 Specifications: Frame: Composite structure: Steel outer walls filled with a steel-concrete composite structure providing the best stability, stiffness ande high vibration absorption capabillities Weight: ca. 1.450 kg Table dimensions: 1255 x 900 x 95 mm., cast-iron Working height: 900 mm Tool opening-table: 255/205/161/106/74 mm. diam. Tools with max diam. Ø 250 mm (max. 150 mm. when tilted 45º) under table level elevation RPM: 3.000, 4.000, 5.000, 6.000, 8.000, 10.000 rpm RPM-adjustement: Frequency controlled Control panel at eye level, turning for highest operator comfort Control: PowerPC-controll industrial controll, equipped with Linux TFT Touchscreen Controll panel with 216 colours), CAN-controlled servo-motoric driven axes for highest repeatabili ...

Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM Manufacturer: Martin Type: T26 M-Nr.: 2000 Year: V415216 Control: Control at eye level: spindel-elevation, -tilting, infeed fence positioning, rpm-setting Control panel: Panel at eye-level, swivelling for operator comfort Motor: 7.5kW (10 BHP) with frequency controlled motor rpm Spindel : SK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Spindle elevation referencing tool 0-position Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: Frequency controlled 7.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: Table length 2.40 mm, width: 700 mm front-side extendable Achs-control: 1. Digital-electric controlled spin ...

Paoloni T140 table spindlemoulder Manufacturer: Paoloni Type: T140 Motor: 5 KW Spindle diameter: 30 mm Spindle elevation: 140 mm Rotation speed: 3000-4500-6000-9000 Spindel elevation: Handwheel with analog clock Feeder: HolzHerr 3 rollen Fence: Aigner integraal aanslag Condition: fully functional

Martin T25 Schwenkspindelfräse mit 2 Achs-elektrische Verstellung Marke: Martin Typ: T25 M-Nr.: V175170 Baujahr: 1990 Motor: 5/6 kW Schwenkung Frässpindel: -5° – +45° Fräsdorn: 30 mm Spindelhöhenverstellung: 150 mm (elektrische Einstellung) Drehzahlen: 3000/4500/6000/9000 U/min (2 Drehzahlmotor) Konus der Frässpindel: MK5 Softstarter: Automatischer Frässpindel-Anlauf/-bremsung per Drehknopf Systemsteuerung: Unteres Spindelverstellung: Elektromotorhöhenverstellung mit Analog-Auslesung Schrägstellung -5° – +45°: -5° – +45° Elektromotorschräge mit digitaler Lesart Fräsanschlag: Aigner Intergraal Anschlag Zustand: Voll funktionsfähig getestet

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included

Auction-ID: A7-50403-82

Komet Adapters / Extensions ABS 25 – ABS 80 – different lengths Number of units 20x Comet Spindles ABS - 1 x Ø 120 – 141 - 1 x Ø 100 – 121 - 2 x Ø 79 – 94 - 1 x Ø 70 – 83 - 1 x Ø 58 – 71 - 2 x Ø 56 – 66 - 1 x Ø 47 – 57 - 1 x Ø 44 – 50 - 1 x Ø 39 – 45 Number of units 11x Komet Double Cutter / Boring Head - 1 x Ø 100 - 157 - 1 x Ø 83 – 121 - 2 x Ø 64 – 91 Comet Drill Bit (Drill Rod) with ISO 50 Mounts - 1 x Ø 58.0 x approx. 180 mm lg. Komet Finely Adjustable Inserts - 6 x different sizes Auction-ID: A1-50529-1023

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manually; Höhenanzeige: digital; Schwenkwinkelanzeige: digital; Fräsanschlaganzeige: mechanical counter; spindle diameter: 30 mm; speed: variable; power consuption: 8 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 1400mm; machine width: 1400mm; weight: 1100kg;

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

tilting spindle: Ja -5 bis 45°; height adjustment: elektrisch; tilting adjustment: elektrisch; fence adjustment: manuell; height indicator: digital; tilting indicator: digital; fence indicator: Scala; spindle diameter: 30 mm; speeds: 3000, 4500, 6000, 8000, 10000; motor power: 6 kW; motor brake: Ja, automatisch; sustion connection: 2 x 120mm; machine length: 1200mm; machine wide: 1400mm; weight: 1100kg;

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;

Code: 0488 Brand: GRIGGIO Model: T 45 T-PL - CE Standard Electronically programmed automatic tilting spindle moulder (+ 45° - 30°) with 3 contolled axis with tenoning carriage - CE Standard Technical data: Spindle tilting + 45° - 30° Shaft diameter mm 40 Motor power Hp 10 (Kw 7,5) Rotation speed 3000/4500/6000/8000/10000 rpm Shaft rotation reverser Electronic programmer SIEMENS controlling the sequential movement of the spindle Electronic programming: Spindle working height - Spindle tilting - Spindle moulder fence Electronic spindle moulder fence with spindle support to facilitate table exclusion Table with movable sector with manual adjustment in place of the rings on the table Height of work table mm 920 Extensible front support bar Work table dimensions mm 1800 x 730 Max tool size retractable under work table mm 320 x 140 Tenoning carriage for tenoning ope ...

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

Control: Siemens 840 D powerline Accessories: Tool holder bar loading magazine Fully functional and still under power, can be visited at any time

!bargain price!

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

Year of construction 2006 Fanuc Control 16 TC max. turning diameter 210 mm X-axis X1 / X2 mm 200 Z-axis (left side) Z1 mm 200 . Z-axis (right side) Z2 mm 650 Bar diameter 45 mmLongitudinal travel Planweg Spindle head Spindle bore max. turning diameter 210 mm Spindle speed 4500 rpm Spindle power 2 x 11 kW Spindle nose A2-5 Rapid traverse X-Z axis 24 m/min Rapid traverse right spindle 32 m(min 2 x turret (tool carrier) for 15 tools, driven, VDI40 Indexing time 0.25 sec. Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Accessories: Bar feeder (not original to this machine) Chip conveyor, 3 driven tools.

number of spindles: 8 spindle passage: 36 mm turning length: 250 mm spindle bearing diameter: 358,2 mm bar material dia.: 36 mm bar length: 4000 mm longitudinal slide -travel: 145 / 250 mm cross slide - travel: 80 mm spindle turning speed - stepless: 560 - 4000 U/min spindle motor: 28 kW Total weight, approx.: 8500 kg dimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm - Beckhoff CNC control system (Win2000) - IEMCA 4m bar feeder (PRA52/P-Typ42) + Hydraulic catch chute + Mechanical end-piece chute with container + Parts conveyor belt + 3–4 bar oil connection + 100 bar high-pressure connection + 1 HYDAC hydraulic oil cooler + 1 oil cooler for cutting oil + 1 chip conveyor + 1 magnetic roller for sludge removal + 1 new air conditioning unit for control cabinet / year of manufacture 2025 + Feed block: new brass strips fitted in 2023, making the machine as good as new + Spindle coup ...

Used multi-spindle machine INDEX MS36E Year of manufacture 1996 including tons of accessories (collets, synchronizers, interchangeable wheels, various working curves, etc.) The system is virtually ready for dispatch, in a dismantled state for inspection. Photos, technical data and list of accessories see attachments. It has no major defects, is in principle ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessories list MS36E: IEMCA Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronous Pliers (Sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30.5 2x Ø 27.5 Ø 31 Ø 32 div. baking Ø 33 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets  ...

Here we have a Weiler DZ 65, 16-fold Duplomatic Stern turret, 2 spindles, collet head for both spindles, driven tool on all Rev places, Chip conveyor, coolant through 2 spindle, spring ejector 2nd spindle, rod feeder connection, parts removal via drip tray, parts conveyor belt, various spindle insert tubes, chip conveyor, material feed Irco Profimat 3m,

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Cat. No. 12-1075 in very good condition New price: 2000€ Dimensions and weight: LxWxH: 70 x 48 x 103 cm Weight: 38 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Salva Modular deck oven type: UPV CL model: ST85 Ask for further information

Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.

CTX Toastmaster Pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control