134,821 used machines on RESALE, but how to find them? Machine Search
A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.
Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1) ...
turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.
A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.
WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool ...
Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 € : 2623.32 € : 1020 mm : 2000 mm : 510 mm : 358 mm : 770 mm : 560 mm : 361 MK : 12 : 6,3 - 315 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 505 mm : 270 mm : 105 mm : 6 MK : 225 mm : 18.5 kW : 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amest ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113720 € : 2149.31 € : 800 mm : 2000 mm : 400 mm : 315 mm : 560 mm : 560 mm : 318 MK : 12 : 8 - 400 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 11 kW : 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra ty ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 € : 2147.42 € : 800 mm : 2000 mm : 400 mm : 260 mm : 560 mm : 560 mm : 318 MK : 12 : 8 - 400 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 11 kW : 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra ty ...
Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 20 A Tip length: 1000 mm Center height above bed: 250 mm Turning diameter over bed: 500 mm Center height over support: 150 mm Turning diameter over support: approx. 300 mm Spindle passage: approx. 58 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck FORKARDT, diameter: 200 mm also a two-axis digital display from the manufacturer HEIDENHAIN Speed: up to 2500 rpm Auction-ID: A7-49089-410
Incl. accessories, consisting of: a.o. Extensive collection of clamping devices 1 storage rack with contents, dimensions (LxWxH) approx: 1350x880x1100 mm Approx. 11 tool holders (quick couplers) 1 cabinet with contents, dimensions (LxWxH) approx: 920x460x1080 mm Auction-ID: A1-49926-6
Conventional lead and tension spindle lathe from the German manufacturer Heidenreich & Harbeck (VDF), Hamburg, classic toolmaker lathe with hardened bed and mechanical feed and thread cutting gear. The machine is equipped with a Multifix quick-change holder (type B) and has a wide range of accessories including tool cabinet and turning holder package. Electrics: Operating voltage: 380 V Control current: 220 V Frequency: 50 Hz Total current: approx. 4 A Equipment: Multifix quick-change holder type B several rotary holders and drill holders Forkardt 3-jaw chuck Ø200 mm Tooling tool cabinet classic VDF feed and threaded gearbox Auction-ID: A7-49942-600
Serial number: 0577 Voltage: 400 V Frequency: 50 Hz Tip height: 280 mm Distance between tips: 2000 mm Circulation diameter over bed: 560 mm Circulation diameter over cross slide: 390 mm Rotation diameter in offset: 810 mm Spindle bore: 80 mm Spindle holder: MK 7 Centering tip holder: MK 5 Spindle speed: 20 - 1600 rpm Motor power: 7.5 kW Bed width: 345 mm Bed length: 2650 mm Travel cross slide: 265 mm travel upper slide: 135 mm Travel tailstock: 180 mm Diameter tailstock quill: 75 mm Diameter lead screw: 35 mm Pitch lead screw: 6 mm incl. two-axis digital display, manufacturer EASSON, type: ES-8, as well as three-jaw chuck, diameter: approx. 400 mm with Multifix base holder and tailstock and an additional steady rest and a side cabinet with stock of turning steels, turning steel holders, reducing sleeves and other clamping jaws Reference: Wowi - Lot 40 Auction-ID: A7-49882-188
Technical data Manufacturer: Harrison Type: V460 Serial Number: 4V0160 Year of Make: 2013 Center width: approx. 1400mm Center height: 230 mm (Source: Online research) Circumferential diameter over bed: 460 mm (Source: Online research) Circulation diameter over face slide: 270 mm (Source: Online research) Circumferential diameter in the bed drawer: 730 mm (Source: Online research) Spindle bore: 76 mm (Source: online research) Spindle Nose: D1-8 Camlock (Source: Online Research) Spindle speed: 20–2,000 min⁻¹ Spindle motor: 11 kW (Source: Online research) Tailstock: Quill Ø 95 mm, MK 6 (Source: Online research) Digital display: ACU-RITE 2-axis DRO Connection: 415 V / 3 Ph / 50 Hz / 30 A Configuration Version: Conventional horizontal lathe with variable spindle drive, three-jaw chuck, quick-change tool holder, tailstock, digital display and work li ...
Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor
Control: Siemens 840 D powerline Accessories: Tool holder bar loading magazine Fully functional and still under power, can be visited at any time
Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625
Year of construction 2006 Fanuc Control 16 TC max. turning diameter 210 mm X-axis X1 / X2 mm 200 Z-axis (left side) Z1 mm 200 . Z-axis (right side) Z2 mm 650 Bar diameter 45 mmLongitudinal travel Planweg Spindle head Spindle bore max. turning diameter 210 mm Spindle speed 4500 rpm Spindle power 2 x 11 kW Spindle nose A2-5 Rapid traverse X-Z axis 24 m/min Rapid traverse right spindle 32 m(min 2 x turret (tool carrier) for 15 tools, driven, VDI40 Indexing time 0.25 sec. Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Accessories: Bar feeder (not original to this machine) Chip conveyor, 3 driven tools.
number of spindles: 8 spindle passage: 36 mm turning length: 250 mm spindle bearing diameter: 358,2 mm bar material dia.: 36 mm bar length: 4000 mm longitudinal slide -travel: 145 / 250 mm cross slide - travel: 80 mm spindle turning speed - stepless: 560 - 4000 U/min spindle motor: 28 kW Total weight, approx.: 8500 kg dimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm - Beckhoff CNC control system (Win2000) - IEMCA 4m bar feeder (PRA52/P-Typ42) + Hydraulic catch chute + Mechanical end-piece chute with container + Parts conveyor belt + 3–4 bar oil connection + 100 bar high-pressure connection + 1 HYDAC hydraulic oil cooler + 1 oil cooler for cutting oil + 1 chip conveyor + 1 magnetic roller for sludge removal + 1 new air conditioning unit for control cabinet / year of manufacture 2025 + Feed block: new brass strips fitted in 2023, making the machine as good as new + Spindle coup ...
Used multi-spindle machine INDEX MS36E Year of manufacture 1996 including tons of accessories (collets, synchronizers, interchangeable wheels, various working curves, etc.) The system is virtually ready for dispatch, in a dismantled state for inspection. Photos, technical data and list of accessories see attachments. It has no major defects, is in principle ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessories list MS36E: IEMCA Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronous Pliers (Sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30.5 2x Ø 27.5 Ø 31 Ø 32 div. baking Ø 33 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets ...
Here we have a Weiler DZ 65, 16-fold Duplomatic Stern turret, 2 spindles, collet head for both spindles, driven tool on all Rev places, Chip conveyor, coolant through 2 spindle, spring ejector 2nd spindle, rod feeder connection, parts removal via drip tray, parts conveyor belt, various spindle insert tubes, chip conveyor, material feed Irco Profimat 3m,
Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t
Weibert WJ-F30 Table milling machine 5.5 KW R + L barrel swiveling 3000 to 10000 U/1 Control Panel top Safety rulers WJ 600500
Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI
Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm
Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0
see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high
Main spindle drive, 2AD160C-B35OB1-BS03-A2N1, R911243562, Rexroth, overhauled-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 37,7 - 55,5 KW - 380V / 3 in. - 1500 - 6000 rpm - 240 Nm - 93,5 A - 280kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
various hand spindle presses small More: Foot pendulum press Jantsch
Main spindle drive, 2AD132D-B05OB2-AS03-B2N1, R911238179, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 22 - 33 KW - 380V / 3 pol. - 1500 - 7500 rpm - 140 Nm - 54 A - 162 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
2 squid drilling spindles ROTAX, for conversions etc.
Main spindle drive, 2AD101D-B05OB1-BD03-A2N1, R911250119, Rexroth, refurbished as new Special price Used and refurbished! The part was purchased from a spare parts warehouse of a company. The main spindle has been completely reprocessed by Bosch Rexroth and is therefore in mint condition. - Asynchronous motor, main spindle drive - Power: 9.5 - 14.25 KW - 380V / 3 pol. - 1500 - 9000 rpm - 60 Nm - 42 A - 71 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg
Grinding spindle VOUMARD M60DR, max. 60000 rpm, approx. 160 x 300 mm long Next: grinding spindle VOUMARD C28-9D
FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!
Drill head with 8 spindles and central drive, for conversions or adaptations etc.
maximum number of results exceeded
please refine your search
800 € 
