127,367 used machines on RESALE, but how to find them? Machine Search
General SKU327X676 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity7.5 KW Temp.140 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity7,5 kW Temperature—25 / 140 °C Tank capacity50 l. With pumpcheck(2x) Capacity4 m3/h Motor2x 3 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR350HT Mach.No.HKS08078 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,00 x 1,50 m Total height2,00 m Weight1500 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destin ...
General SKU327X677 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Water glycol Capacity4.5 KW Temp.45 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:water/glykol Electric capacity4,5 kW With coolingcheck Temperature-25°C/+45°C Tank capacity80 l With pumpcheck 3x Capacity1,4 m3/h Motor3 x 1,1 kW (400 V, 2900 rpm) With temperature controllercheck Information TypeTR400T Mach.No.HKS08079 Year of construction2008 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,30x1,90 m Total height2,00 m Weight2000 kgTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...
General SKU394U1128 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Heating medium:Therminol D12 Heating capacity300 kW Electric capacity306,45 kW, 400Volt Temperature-40°C/+200°C With pumpcheck Capacityunknown. Motor5,5kw, 400/690 volt, 2880rpm (ex) Information TypeTR400 HHKT-EX Mach.No.HKS08019 Year of construction2008 Floorspace2,15x1,00 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...
General SKU394U1111 LocationBarneveld CEcheck MakeLauda Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt, , (Ex) Temperature-35/130 ºC With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information TypeTR400HK/K-EX Mach.No.HSK13074 Year of construction2013 With switchcheck Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
General SKU278N326 LocationBarneveld MakeLAUDA TypeSUK 400 W-EX Main Features Heating (medium)Electric Capacity27 KW Temp.20 °C Specified Features - Temperature control unit Temperating machineProcesscoolingsystem Heating medium:Downtherm J With coolingCoolingmedium R404 A Temperature-40 /20 gr.C. With pumpcheck Motor37 KW, 400 Volt (Ex) With temperature controllercheck Information Mach.No.HKS08013 Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace1,3x1,9 M Total height2 M Weight2300 KG ATEX compatiblecheck Technical specs Extra informationheatingsystem 8 bar, coolingsystem 28 barTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...
General SKU327X678 LocationBarneveld CEcheck MakeLauda Pressure Working pressure28 Bar Main Features Heating (medium)Water glycol Capacity15.5 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating capacity15.5 kW With coolingcheck R404a Temperature—30 / 120 °C With pumpcheck Capacity67 l./min With temperature controllercheck Information TypeT 10000 W Mach.No.LWP210-08-0005 Year of construction2007 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace0,85 x 0,80 m Total height0,97 m Weight242 kg Extra SpecificationsWorking temperature range: —30 / 120 °CTemperature control unitsNew arrivalsLaudaHeat exchangers > Temperature control unitsNew arrivalsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready fo ...
diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500
vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100
vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125
bushing cut-off , PKO diameter range 2-6 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 95 mm shaft length under head 75 mm output - pieces/min 80-200
Key data: 90 mm, 1250 mm, 900 mm
Inv. Num. : 9038 Type: W 9 Producer: TOS Generated: Parameters: Work table length: 950 mm Work table width: 950 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Equipment: DRO (3 axes) Rear support column Clamping angle Tools
General SKU437X1383 LocationBarneveld Pressure Working pressure shell45 Bar Vacuum possible shellcheck Working pressure tubes25 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface30 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface30 m² Tube capacity190 l. Number of tubes:40 Tube diameter25 mm Tube length10 600 mm Wall thickness tubes2 mm Max. temperature250 Shell capacity420 l. Shell diameter400 mm Shell length6 400 mm Max. temperature250 Shell connectionsDN80 Cover connectionsDN80 Information MakeK.ley Eiterfeld Serial5654 Magento base g_extra_specificationsPressure -1/25 bar, volume 190 l., allowable temperature 250°C, jacket volume 420 l., pressure -1/45 bar, 30 m2, own weight 1800 kg, drawin ...
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece
Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -rotating platform: 3460 x 2700 mm -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 7000 kg -Tires: solid rubber -Trailer hitch -External dimensions: 5530/2700/H590 mm -Own weight: 1410 kg
Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 6800 kg -Tires: solid rubber -Trailer hitch -External dimensions: 4760/2730/H585 mm -Own weight: 1100 kg
Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece
Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -3 roller conveyors, rollers: Ø 900 x 560 mm -Load capacity: max. 7000 kg -Tires: solid rubber -External dimensions: 4520/3375/H580 mm -Own weight: 1130 kg
Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Artec, TIG welding machine -Cooling: Water-cooled -Type: TIG 235 i DC -Welding current: max. 225 A -incl.: ground cable, throttle valve, hose assembly -Dimensions: 880/430/H645 mm -Weight: 87 kg
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg
Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg
TIG welding rod, welding wire Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades. -net weight: 5 kg -Number: 2x package available -Price: per package -Weight complete: 5.2 kg/package
TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece
Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.
Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg
Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg
Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm -Weight: 1.1 kg/pc.
Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: GST Schneider, Transformer Type 13GST108 -Power: 0.384 kW -Technical data: see photo of the nameplate -Motor protection switch: Telemecanique GV2-RT05 -Number: 2x transformer available -Price: per piece -Dimensions: 360/205/H115 mm -Weight: 12.2 kg/pc.
Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system -Manufacturer: SCS Stäfa, temperature sensor control system unused original packaging -Type FT-TH2 -Item no.: 0 873 80-03 -Measurement probe: Screw-in length approx. 75 mm -Dimensions cardboard: 155/80/H55 mm -Weight: 0.3 kg
Tool holders for milling chucks, spindle head holders, modular tool pockets, tool holder sets, assembly trolleys, CNC transport trolleys -Assembly trolley: for 64 pieces of SK50 tool holder -Transport trolley: heavy-duty design -Number: 2 trolleys available, 1 with 2 swivel casters / 1 with 4 swivel casters Price: per piece -Dimensions: 1140/500/H930 mm -Weight: 60 kg / 63 kg
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 ID.No. 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg
Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet
Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg
Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg
Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch, unused, original packaging -Type: TBFR 112 spec. -Temperature range: 18 to 55 °C -Cardboard dimensions: 220/120/H50 mm -Weight: 0.5 kg
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg
PLC control, mains filter, mains filter, Simodrive choke transformer -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Chorus: Type 6SN 1111-0AA00-0BA0 -Transformer: Trasfor TNT BN 2K5/E -Price/Delivery: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg
Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg
Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: Teco, clamping tool clamping bracket, various designs -End terminal: Type 30501 / 30502 / 30503 2 pieces each -Step block: Type 40102 / 40103 / 40104 4 pieces each -Clamping bolt: thread M10, see photos 24 pieces -Price/Delivery: complete -Dimensions: 390/190/H210 mm -Total weight: 6.5 kg
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Dimensions retracted: height 240 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 500 mm, roller spacing 100 mm -Rail spacing: 1554 mm -B. Pressure: 160 bar -Weight: 372 kg
Scissor lift table, scissor lift table, scissor lifting platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 760 mm -Dimensions retracted: height 225 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 510 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1490 mm -Weight: 350 kg
Telecentric lighting, LED lighting, Telecentric lens, Measuring lens, Industrial camera -Manufacturer: Basler Vision Control, industrial camera with telecentric lens -Camera: Basler Type piA2400-17gm -Lens: type vicotar T201/0.15 -Total dimensions: Ø 70 x 345 mm -Weight: 1.2 kg
Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor -Load capacity: 1000 kg -Platforms: 2420 x 710 mm -Dimension retracted: height 230 mm -Extended dimensions: height 1100 mm -Rollers: diameter 40 x 495 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Weight: 360 kg
collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg
hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, triple hydraulic pump -Type: ZZ EP 0012 / 32 AP 0168 / TK11/11/6SF -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 2x pumps available -Price: per piece -Dimensions: 320/90/H115 mm -Weight: 9.1 kg/piece
maximum number of results exceeded
please refine your search
