129,247 used machines on RESALE, but how to find them? Machine Search
pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure:800 t distance between columns:3250 mm stroke:1100 mm Distance table/ram, stroke up:1900 mm Table surface area:3100 x 1900 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:300 mm Die cushion area in table:2500 x 1800 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:200 mm Die cushion area in ram:2200 x 1000 mm Ram surface:3100 x 1900 mm Side window:900 mm Oil volume:4700 l Power capacity:200,0 kW Dimensions (WxDxH):4,95 x 3,3 x 10,2 m Height above floor:7,05 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic
Pressure:800 t distance between columns:2560 mm stroke:1050 mm Distance table/ram, stroke up:1870 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:300 t Die cushion stroke in table:395 mm Die cushion area in table:2300 x 1300 mm Ram surface:2500 x 1730 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:150 mm Side window:1000 mm Oil volume:4300 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 10,0 m Height above floor:7,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable
Pressure:800 t distance between columns:3550 mm stroke:1100 mm Distance table/ram, max. stroke up, adjustment up:1900 mm Table surface area:3500 x 1800 mm pressure of drawing cushion in table:350 t Die cushion stroke in table:280 mm Die cushion pressure in ram:80 t Die cushion stroke in ram:160 mm Ram surface:3500 x 1800 mm Side window:1900 mm Weight:100,0 t Floor Space (WxD):5,3 x 4,3 m Height above floor:7,3 m Height below floor:5,0 - 6,0 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic sliding table:without rails for moving table
Muller Martini Presto – Saddle Stitcher SN: 91.06986 – 400 V The Muller Martini Presto is a highly reliable and efficient saddle-stitching system designed for medium-to-high-volume production. Renowned for precision, flexibility, and user-friendly operation, it is ideal for producing magazines, catalogs, brochures, and a wide variety of stitched print products. This complete production line includes stitching, gathering, cover feeding, trimming, and product transport—perfect for high-quality book and booklet finishing. System Configuration Stitching Machine – Type 1550 A robust stitching unit engineered for consistent and accurate wire stitching performance. 4 Double Stations – Type 1551 Which make 8 Stations Four dual feeding/processing stations that ensure continuous, efficient workflow and increased production capacity. Cover Feeder – Type 1528.0417 Automated cov ...
pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T
Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible.
Mobile 150L vessel with passiv-doubleflap. In M4V steel.
Neuweriger Doppelkopf make W. Müller. With WDS and filter
General SKU409X1231 MakeDrM LocationBarneveld CEcheck TypeTSD 316 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck (Laboratory Filter) Filter surface0,012 m² Information No.1002561 Year of construction2017 Floor space0,9 x 0,5 m Total height1,65 m Extra SpecificationsTechnical specifications Filtration area: 0.012 m² Filling volume: 0.95 L Max. operating pressure: –1 / +20 barg Max. operating temperature: 250 °C Filter element: Stainless steel candle Gasket materials: FKM / PTFE / FEP Miscellaneous filtersDrM - Dr Müller AGFilters > Miscellaneous filtersBrand > DrM - Dr Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
Offered is a surface grinding machine (cup wheel grinder): Table surface X/Y: approx. 175mm/450mm, max. grinding length: approx. 200-250mm, max. grinding width: approx. 175mm, speed: approx. 2800rpm, weight: approx. 450kg, inspection possible by appointment.
Numbering and book printing unit 16" for Muller Martini Grapha
Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee
Technical data according to Muller Martini
5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro
Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pd-MU 3x690 V 50 Hz 2000/1 A-1-0-+3 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece
Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece
Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg
max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
Stacking tongs, box lifter, bundle clamp, gripper -Manufacturer: Müller Martini, pneumatic stacking tongs type 0277.0401 -Load load: max. 250 kg -Clamping range: 850 to 1350 mm -Quantity: 2x grippers available -Price per piece -Transport dimensions: 940/250/H530 mm -Town weight: 87 kg/pc.
Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V
Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knife Year 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Überleitstation / Transfer-Unit Müller Martini Überleitstation Müller Martini von der Zusammentragmaschine zum Klebebinder Von der ZTM MM Z1 / MM 201 zum Klebebinder Pony 246 - 3020 Transfer-Unit Müller Martini from Gatherer to Perfect Binder From the Gatherer MM Z1 / MM 201 to Perfect Binder Pony 246 - 3020 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm
Split nut, TR375x12, 924399, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr375x12, 560x560x435mm high. 700kg Nut for automatic SZ F./PI. GDK/3800/4100 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg
Furniture trolleys, furniture and plastic rollers, furniture transport trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trucks, table trolleys, assembly trolleys -Manufacturer: Eder Muller -Allocation: 25 storage rows on both sides -Intermediate dimension: 80 mm -Version: 4x swivel castors -Price per piece -Quantity: 3 pieces -Dimensions: 2545/1160 / H1860 mm -Weight: 176 kg / piece
Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately
milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately
Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately
Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately
used
<br><br><br>Still in operation: Yes<br>Available: immediately
New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request
maximum number of results exceeded
please refine your search
