129,377 used machines on RESALE, but how to find them? Machine Search
Operating Weight: Approx. 7,000 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP / 2200 rpm Max Torque: 340 Nm / 1400–1700 rpm Displacement: 3.6 L Hydraulics: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 industrial-grade pneumatic tires Drive: 4-wheel drive (optional locking differential) Max. Travel Speed: 28 km/h Max. Digging Depth: ~3,500 mm (depending on arm config) Cabin: Enclosed with heat and ventilation system Swing Speed: ~9 rpm Attachment Compatibility: Standard bucket + quick coupler; Supports Hammers, Augers, Grapples, etc.
Operating Weight: 7,500 kg Engine: Kubota V2607 (EURO-compliant) Power Output: 42.4 kW (56.8 HP) at 2200 rpm Hydraulic Pump: PNM high-performance hydraulic pump Hydraulic Valves: HF & Parker control valves Bucket Capacity: 0.28 m³ Bucket Digging Force: 56 kN Arm Digging Force: 38 kN Swing Speed: 0–11 rpm Travel Speed: 2.8 km/h Gradeability: 70% (35°) Max Digging Depth: 3,898 mm Max Digging Height: 7,023 mm Max Dumping Height: 5,195 mm Tail Swing Radius: 1,730 mm Overall Dimensions (L × W × H): 6,054 mm × 2,216 mm × 2,672 mm
Operating Weight: 9,000 kg Engine: Cummins QSF2.8 (EURO V compliant) Power Output: 53 kW (71 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure pump Hydraulic Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Travel Motor: Eaton or PMP Hydraulic Working Pressure: 28 MPa Bucket Capacity: 0.4 m³ Maximum Digging Force: 58 kN Swing Speed: 0–12 rpm Traveling Speed: 2.8 km/h Gradeability: 70% (35°) Overall Dimensions: Length: 6,410 mm Width: 2,278 mm Height: 2,630 mm Undercarriage Width: 2,200 mm Ground clearance: 800 mm
Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two manual capping machines and a pressure container are available. 1) Alwid capping machine, year of manufacture: 2004, operating pressure: 6bar-8bar, bottle height range: 81mm-257mm. 2) Bausch & Ströbel screwing machine, operating pressure: 4bar-6bar. 3) Müller K94073 pressure tank, year of manufacture: 2004, volume: 100l. On-site inspection is possible.
A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.
bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...
pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
ram capacity: 2000 t return capacity: 150 t table-size: 1015 x 1050 mm ram head dimension: 975 x 1050 mm dist. between pillars (left to right): 975 mm dayligth: 1000 mm distance table/ram: 600 - 1000 mm ram stroke: 400 mm table height over floor: 800 mm height over floor: 3650 mm Table ejector: 63 KN Ram ejector: 650 KN Table ejector stroke: 100 mm Ram ejector stroke: 100 mm Lenght of ram slide guiding: 1400 mm : Idle speed downward: 235 mm/s working feed: max. 20 mm/sec Working speed at 10000 KN: 14 mm/s Working speed at 20000 KN: 5 mm/s Idle speed upward: 250 mm/s overtravel time: 220 ms safety distance: 352 mm total power requirement: 194 kW weight of the machine ca.: 105 t dimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 m Technical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector ...
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included
Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. 0360 4211 9 For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360
Kreuzleger / Compensating Stacker Müller Martini Perfetto Amrys Year 2007 - SN. MMZO 1 306 445 - 60 Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition--
Fadenheftmaschine / Sewing machine Müller Martini FK IV-S
Fadenheftmaschine - Sewing Machine Müller Martini FK III Format / Size max. 570 x 400mm Anzahl Heftstiche / Number of Stitchers 1 - 12 Anzahl Übernähstiche / overstitches 1 - 6 Anzahl Bänder/ Number of Types 1 - 6 Länge der Heftstiche 16, 24 , 32, 40mm Länge der Übernahstiche 8, 16, 24, 32mm Heftungen / Speed max. 50 Stitching/min.
pressure: 62 t distance between columns: . mm stroke: 360 mm Table area: 2500x580 mm dayligth: 400 mm diameter - coniflex cutter: Zilinderdurchmesser 200 mm 0: 200 bar Stud passage: 590 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Video: https://www.youtube.com/watch?v=gkuLoo7ABkc The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial
Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used
Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Muller Martini Graph print inserts 22" with 1/4" pitch.
24" printing cassetes for MM Grapha. Gearpits 96. In good condition.
Printing inserts only for Muller Martini model Grapha: 4 x 16" 4 x 20" and 4 x 24"
6 feeders 1555 1 cover feeder 1529 1 stitching unit 380 – 3 stitching heads HK 75Q 1 three knife trimmer 449 MM 1564 belt delivery 1 MM Apollo 1540 stacker Compressors
throat: 350 mm stroke: ca. 400 mm ram diameter: 95 mm press capacity: 25 t table depth: 450 mm table width: 1.500 mm table height: 900 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,0 x 2,0 x 2,3 m Straightening Press - Single Column MÜLLER - CR 25.2.1 - Power-On Hours: 543h - incl. working lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm
MM Grahpa 3 tower , unwinder, process unit and rewinder. The machinery is for spare parts.
Printing inserts for Muller Martini Grapha 16". For more info please inquire.
Switches to Muller Martini saddle stitcher feeder: - 0416.2067.2 Switch, 26 pcs. Original price: CHF 1082.00/pcs. Retail price: CHF 400.00/pc. - 0345.3222.2 Switch, 2 pcs. Original price: CHF 653.50/pc. Retail price: CHF 300.00/pc. - 0345.3216.2 Switch, 1 pc. Original price: CHF 848.25/pcs. Retail price: CHF 400.00/pc. - 0316.3206.2 Switch, 1 pc. Original price: CHF 768.00/pcs. Retail price: CHF 400.00/pc. - 0316.3208.2 Switch, 1 pc. Original price: CHF 800.00/pc. Sales price: CHF 400.00/pc.
2x cross perforation cylinders 16" in good condition. Available immediately
22" Cross perforation cilinders for Muller Martini Grapha. Good condition. Available immediately.
2x Muller Martini Progress cross perforation cylinders: 1. One has gear 72 pitc 1/3” 2. One has gear 96 Pitc 1/4” Good condition, no damages. Available immediately.
Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...
Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, ...
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
1 JAKOB MÜLLER direct warper type MW 650, working width up to 650 mm, maximum flange diameter 600 mm, MÜDATA control, warper supplied without creel
Doppelkopf W. Müller 1 channel Material: PVC Good condition
used
Press force: 1250 KN, Stroke rate: 55 min-1, Plunger adjustment: 75 mm Stroke: 20-120 mm, Motor power: 11 kW, Voltage: 380 V Machine weight: 8.6t Projection: 340 mm, Pusher clamping surface: 620 x 300 mm, Table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, Two-hand control device Demolition at the pestle was professionally repaired.
Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg
General SKU445W1538 LocationBarneveld MakeMüller AG TypeSM 252 No.25213002 Year of construction2013 Main Features Motor3 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Materialstainless steel 1.4721(heat resistant) Granulatorcheck Rotor width250 mm Rotor diameter150 mm Number of rotor knives20 Knives staggeredcheck Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor3,0 kW, 230/400 volt, 1425 rpm Rotor speed100 rpm Capacity50 kg/h Information Mounted on framecheck With switchcheck Weight350 kg CEcheck Floorspace1,20 x 0,60 m Total height1,40 m Extra SpecificationsRotor speed 100 rpm, 20x rotor blades, 2x stator blades, With Colortronic metal seperator, type SF 100GranulatorsMüller AGMills > GranulatorsBrand > Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...
MÜLLER MARTINI 321 Saddle Stitching Line Year: 1992 Configuration: 5 × Feeders 1 × Stitching Unit (Muller Martini 321 Saddle Stitcher) 1 × Three-Knife Trimmer 1 × Stacker 2 × Compressors Including manuals Condition: In good working condition, available directly from our warehouse in 67269 Grünstadt, Germany. A reliable and well-maintained line, ideal for efficient saddle stitching and trimming operations. Ready for inspection and immediate use.
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mm SLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS & ...
Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D
pressure: 1000 t distance between columns: - mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: 8 t multiple images available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
