muhr und bender used for sale

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Control for Mazak Intergrex (new) Technical data see pictures Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Storage tanks, steel tanks without pressure 8,000l Tannk No. 28, 29, 30, 31 UNI-OFF Dimensions and weight: Ges. Height: 3300 mm Zyl. Height: 2230 mm Inner diameter: 2000 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)

Polishing, polishing machine, grinding machine, grinding Bock With 380V connection. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

SCHUNK 2 finger parallel grippers and Rotary unit new Parallel grippers: PFH 40-AS / 302041 Rotary unit: OSE-A34-4 / 354304 Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Zinser LK 110 Photo-optical cutting and plasma cutting system. The system has been upgraded from a control point of view. Cutting is possible via Photokop as well as via Cad / Cam Sytem possible. Optionally, autogen or plasma can be cut. Plasma source : Kjellberg PAS 45 W (cut up to 45mm) suction cutting table: 1.5 x 3m (new) including control PC with Cad/cam system Complete machine bridge available as spare part dispenser. Under electricity to visit .; ready for immediate use

Storage tanks, steel tanks without pressure 20,000l Tannk Nos. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 UNI-OFF Dimensions and weight: Ges. Height: 3830 mm Zyl. Height: 2800 mm Inner diameter: 2780 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with flange - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 5 feet - with residual outlet DN 65 (inclined seat valve)

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

Description: Design : Casting resin transformer Design: Dry Make : SGB Built: 2010 Condition : new Rated power: 1000 KVA Overvoltage: 10 KV +- 2 x 2.5% Undervoltage: 400 V Switching group: Dd6y 5 Frequency: 50 Hz Cooling type: AN Total weight: 2410 Kg If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: M. Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

Loma 6000 checkweigher. Push reject for over- and underweight weighins Maximum weight: 6 kg per product Weight precision: 0,6 gram Speed: 250 products per minute Finish: 304 stainless steel Conveyor width: 140mm Year of production: 1999 Serial number: ACW-40540-010733 Condition: good Dimensions: 1.800mm x 900mm & 1.100mm (LxW&H)

SF WeighStation checkweigher. Double rejects for both under- & overweight weighins. Conveyor width: 600mm Year of production: 2014 Serial number: SF 589314.738 Dimensions: 2.850mm x 1.200mm & 1.800mm (LxW&H)

Eurolux beer tanks / fermentation tanks made of V2A with cone bottom, Test pressure: 1.5 bar, operating pressure: 0.99 bar with cooling jacket - capacity: 1500 litres New Material: V2A (AISI 304) 1.4301 Topsoil: with manhole with 6 screws with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 valve Cylinder tank: Cooling jacket 1000 mm wide with connection 1" AG input and 1 1/4" AG output Underbody: can be underrun with lifting scales and forklifts with residual outlet with forward-drawn outlet pipe, tank flush threaded nozzle DN 50, according to DIN 11851 with cone floor 120 Dimensions and weight: DxH: 1150 x 2400 mm Zyl. Height: 1500 mm Weight: 165 kg On request with: (extra charge - price on request): Fermentation sprout connection DN 50 Tasting tap DN 15 Fermentation s ...

under electricity information on request; ready for immediate use

A roll punching press for stamping is available up to A3. The die is pulled under the roll.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

NEUMASCHINE - Double-sided belt grinding and polishing buck, under- Configurations are possible - grinding / grinding grinding polishing polishing motor 4, 5.5 or 7.5 kW, polishing disc max. 120 x 500 mm, max. Contact disc 400 mm, grinding belt 50 x 3500 mm, - 3 different Speeds can be used: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm-1; NEW MACHINE

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

This vertical lathe was built in 2014 for our customers. At that moment, he lost a contract work for this machine. That's why he wants to sell this machine. This machine is under power. Delivery time: immediately Control: Siemens 840 d Support number: 2 pcs (one is cnc controlled, conventional second) Turning diameter: 2500 mm Height of turning: 2200 mm! Table diameter: 2250 mm Table load: 16 000 kg Max table speed: 120 RPM Main motor power: 55 kW

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

Used Final View Labels-MHD Control Device No. 2TG024887 Year built: 2010 Out of service since 2016 Device specification: Application (B/h) 36,000 Installation location behind the labeling machine Task: Container insection - underfilling and overfilling Container inspection - safety ring Detection in the labeler - hull label Recognition in the labeler - back label Accessories SPECTRUM refrigerator Follow-up error labeling machine takes stop signal to line MHD control in the labeling machine Messbrück container inspection version left Trigger bridge oblique lysread lid inspection of the retaining ring Discharge signal control One-segment Heuft Pusher Pusher PSH BG0109 The device has been stored properly by the manufacturer

Properties < b >: < / b > Used pallet roller conveyor Condition: Excellent condition with light wear Material: Steel (galvanized) Color: grey Expertly disassembled and packed 10 items in stock Specifications < b > < /b > Pallet roller conveyor dimensions approx. Total length of an element: 2000mm Total width: 890 mm Roll width: 760 mm Length: 130mm Rolling cross section: 60 mm 8weyjr3vn Material: Steel, galvanised Frame height: 90mm Pallet roller conveyor < b > < /b > Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination. Tailor-made solutions < b > for your intralogistics < /b > We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! ...

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price

A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Selling complete switch production with know how. Production include: Bflvedy7tb 1. 51 moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 28 stamping tools for steel parts underconstruction of bottom switches and plugs 3. Complete assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 50000 parts on stock to assemblle 5. Packed finished stock of switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information with buyers list , price lists. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company has ISO 9001 AND IT ...

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Storage tank/ stainless steel tank pressureless, standing Content: 20,000 litres UNI-FIN-FOR B. No. 20-009 GL Dimensions and weight: Diameter approx. 2,600 mm Zyl. Height approx. 3,750 mm Total height with feet approx. 5,370 mm Built: 1992 Material: Stainless steel 1.4301 Wall thicknesses: underbody 3 mm, cylinder + top 2.5 mm Containers with cone bottoms Topsoil: 2 crane eyelets 1 flange nozzle DN 65 1 Vent ingesride DN 100 with bow Tank cylinder: 1 manhole 440 x 340 mm at the top: 1 3/4 Underbody: 1 outlet nozzle with bow pulled forward NW 65 in the outlet pipe there is still a outlet DN 40 otherwise according to photos

RECON - complete ground to 1st level undersize 204,5 mm - pn. X11.02001-9047 - incl. counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Knife Corta K 1500 / 2000 Photooptic cutting machine working area 1500mm x 3000mm cutting with propane or aceethylene under current.; ready to use

Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres Available: 4 pieces UNI-SCHLI-FOR B. No. 18-086 A-D GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 2 crane eyelets 2 Threaded nozzles DN 50 1 elbow NW 40 cut off 1 nipples 1" 1 nipples 1/2" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos The containers additionally have 1 slanted seat flange NW 150 for agitator without agitator A container has a slight vacuum damage at the top

continuous grilling line all stainless steel bottom contact grilling + hot air steam injection belt width 1.000 mm nett length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm

See pictures under electricity with accessories immediately available

Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres UNI-SCHLI-FOR B. No. 18-087 A-F GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 3 crane eyelets 2 Threaded nozzles DN 50 1 nipples 3" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos Three of the containers have an additional 1 agitator flange DN 200 A container has a slight vacuum damage at the top

Horizontal 5-axes CNC lathe Quick tech DT 42 DUO Year 2012 Control: Mitsubishi M70 Machine number: 3264 Weight: 3,400 KG 380 V, 60 HZ 15 KVA S1, S3, X, Y, Z, X 1, Z1 Maximum turning diameter: 42 mm Maximum turning length: 100 mm Spindle bore: 44 mm Speed: 4,000 rpm. Procedures: X: 200 mm Y: 250 mm Z: 235 mm X-1: 235 mm Z-1: 235 mm Bar feeder quick tech BFG 42 with LED display the rod length / position of the rod Year 2012 Machine number: 1154 Weight: 1800 KG 220 V, 60 HZ The machine can be visited at any time under power and is in a good condition. We love to hear from you.

with (wide) swivelling vertical head table size 300 x 1,430 mm table paths: laengs (X-axis) 1,000 mm persive (Z-axis) 520 mm quer (Y-axis) 360 mm installation height under fraes spindle approx. 500 mm Extension of the fraesspindle min./max. 350 mm spindle holder SK 40 spindle speeds 25 - 1,200 rpm feed/rapid speed 12-900 mm/min spindle drive approx. 3 kW Total drive 3.4 kW - 380 V - 50 Hz weight 2,400 as kg;

Underscore 5,158:1

Used low-pressure flame pipe boiler from LOOS from Gunzenhausen in good condition. The plant was in operation until the demo days and was shut down due to general plant changeover. Manufacturer LOOS Gunzenhausen Type: UN-D 2600 53.0 m2 x 1 bar Built in 1999 Ab. Steam generation 3200 kg / h Ab. Pressure 1 bar Water content 2560 l Brenner Weisshaupt Type L7T Heating oil burner Power 320 - 1957 kW Used last TÜV exam 2018 Dimensions: 4000 x 1900 x 2400 mm Also visit our website. We have a wide range of products in stock for the industry. A visit is worthwhile. The information about our company and the link to our website can be found in the dealer list under Brand GmbH.

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price

see data sheet available under electricity immediately

Solid pump sewage sludge pump Saxlund with double hydraulic aggregate 90Kw + 18.5 Kw used Solid pumping system consisting of 2 x solid piston pumps (duplex pump) oil-hydraulic drive/hydraulic unit. For reliable conveying of sludge of all kinds. Manufacturer: Saxlund 2 cylinder solid piston pump / double pump: Type: 119083 Komm.Nr. 2925-30/59410/2 Operating pressure: max. 280 bar 100/63/1000 Outer diameter: 140 mm Inner diameter: 13 mm Dimensions: 1x approx. 3,700 x 700 x 1,300 mm Dimensions: 1x approx. 3,750 x 850 x 1,800 mm Drive hydraulic unit: Square Bosch Hydraulics Saxlund 9710026 HA1-0 4069 No. SAX.2925-30 Built: 1998 V = 1200 P = 90 kW P = 18.5 kW Dimensions: approx. 2,400 x 1,700 x 1,900 mm ---------------------------------------------------------------------- ---------------------------------------------------------------------- ----------------  ...

EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...

Plasma and cutting machine Promotec Ector 30 / 170 Working range: 3000mm x 17000mm 1 x Plasma Ht 2000 Hypertherm cutting up to 25mm 1 x Autogen support up to 100mm machine to visit under power . Without table and filter assembly and commissioning on request; ready for use

See pictures under current with accessories now available

52,000 litres KZE tanks/storage tanks/ sterile tanks 4 pieces UNI-BAR B. No. 19-091 A-D GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap 1 slanted seat flange DN 350 for agitator - without agitator - Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional