muhr und bender used for sale

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Mubea Hole Punch Model KL 750 Optima Year of manufacture 1990 fully functional Hebqowr Dk Rjxim Iqsfb Max. punching force 750 kn Triggering stroke via foot switch With very extensive tools, see photos

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand lever scissors, mounted on concrete base, see pictures Sheet width - max. 200 mm Sheet thickness 6 mm Jxdh33 Flat steel 70 x 7 mm Round steel 13 mm

connected load frequency: 220 V rated current: 263/152 : 01516 81 663 694 weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 200 mm plate thickness: 6 mm flat steel: 70 x 7 mm round bar steel: 13 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 800 x 500 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

Inv. Num. : 7529 Type: CNC BENDER EB-30 Producer: EHRT Created: 2005 Parameters: Control system: MICRO computer Maximum power: 300 kN

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

Offer 26085 Technical data: - Bending performance pipe at 45 kg / mm² to Ø 60 X 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - 8 bending tools - 1/2" R 46 mm, 25 R 56 mm, 30 R 67 mm, 3/4" R 56 mm - 1" R 67 mm , 1 1/4" R 100 mm , 11/2" R 130 mm , 2" R 150 mm

Defective. Auction-ID: A1-45188-144

Output: 610mm, Stroke: 60mm, Capacity: Ø 30mm in 15mm, Ø 50mm in 9mm, Ø 100mm in 4.5mm steel, including 1 case with various punch accessories.

Defective.

Output: 610mm, Stroke: 60mm, Capacity: Ø 30mm in 15mm, Ø 50mm in 9mm, Ø 100mm in 4.5mm steel, including 1 case with various punch accessories. Auction-ID: A1-44726-6

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

S13 - used approx. 10 m³ / 10,000 litres underground tank, steel tank, firefighting water tank, cistern. technical details: capacity: approx. 10 m³ / 10,000 litres material: steel tank weight: approx. 3 tons dimensions: approx. Ø 1.6 m x 5.20 m Used steel tank in good condition, coated in bituminous insulation or bitumen paint, underground storage tank, lid and connections on the top. The tank has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport or the excavation may be present on the outside. This container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it  ...

S07 - used approx. 20 m³ / 20,000 litres steel tank, double-walled, underground tank, fire-fighting water tank, water cistern. In good condition, double-walled steel tank, lying horizontally, underground storage tank, water tank, diesel fuel tank, heating oil tank. volume: approx. 20 m³ / 20.000 litres material: steel tank length: approx. 6.00 m diameter: approx. Ø 2.00 m weight: approx. 4,0 t Outer side with bituminous insulation or bitumen coating. Used storage container, emptied and professionally cleaned inside. According to the age traces of use are present. Lightest damage and small dents to the insulation due to the excavation process. The tank is fully functional. This steel tank can be used as a storage container for many different media. On demand we can also modify it as a fire-fighting water tank, just ask us. Price upon request. Transport c ...

DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,8 x 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

J 212 GS

J 208 GS

J 612 C

The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

P404 - used approx. 50 m³ / 50,000 L polyester silo, GRP silo, with undercarriage. Technical details: Capacity: approx. 50 m³ / 50,000 litres Material: Polyester / GRP silo Manufacturer: Reich Tank Year of construction: 2.000 Specific gravity: min. 1.2 kg/L Test mark: Z-10.2-163, DIBT is supplied. Dimensions: approx. Ø 3.00 m × H total 12.00 m / frame approx. W 3.00 m × D 3.30 m × H 3.00 m Miscellaneous: Used polyester silo in good condition, former salt silo. Standing silo made of GRP, dome on top of the roof, several inlets and outlets. Incl. load-bearing steel construction / undercarriage. Cleaned inside and out, roof repainted. The silo is sold, as you can see in the pictures. Attachments such as pipes, fittings and accessories are not included in the purchase price. We leave the parts at the silo, but during transport and dismantling, something can break in the ...

P393 - used approx. 45 m³ / 45.000 L polyester silo, GRP silo, with undercarriage, completely repainted. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Polyester / GRP Silo Manufacturer: Theodor Vanck GmbH Density DIN 1055: max. 1.4 Kn/m³ DIBT: Z-10.2.2-22 Dimensions: approx. Ø 3.00 m × H total 14.00 m / H GRP cylinder 9.00 m Undercarriage measured externally, i.e. incl. steel girder approx. D 2.56 m × W 3.96 m Undercarriage measured inside, i.e. without steel beam approx. D 2.16 m × W 3.46 m × H 3.70 m Other: Silo and undercarriage were repainted by us, see photos. All parts fit on a truck. Used polyester silo, cleaned, in good condition, former salt silo. Standing silo made of GRP, on load-bearing steel structure / undercarriage, dome on top of the roof, several inlets and outlets. Incl. ladder and railing on top of the silo, see photos. Th ...

Electric heating, electric radiator, heating coil, electric tubular heating element, floor convector -Length: 3900 mm -Width (depth): 260 mm -Height: 145 mm -Price: per piece -Number: 2 pieces -Weight: 41 kg/piece

Gray cast iron underfloor box -Manufacturer: Bethmann lightning protection and lightning protection Kransteiner -Opening: 115 x 170 mm -Number: 3x available -Price: per piece -Dimensions: 272/195/H115 mm -Weight: 5.2 kg

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm -Flange outer diameter: 250 mm -Flange inner diameter: 130 mm -Pump diameter: 175 mm -Weight: 235 kg