muhr und bender used for sale

Kat-No 09-1025 New! made of stainless steel Make: Eurolux -very stable experience -Your advantage: can be used as a base frame and as an interlayer frame -All-sided (also with pallet truck) can be underrun Mass and weight: Total height:390 mm Width:760 mm Length:1250 mm Weight:27 kg Price is valid for one item. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

steel plate silo underpassable, volume approx. 8 m3, payload approx. 12 tons, net weight approx. 1,500 kg, outlet height approx. 2,500 mm, outlet flat slider hydraulic, tank open at the top 2,000 x 2,500 mm, footrests pluggable, container underpassable for truck platform, 1 ladder

Bottler for ketchup, majonaise, remoulade, mustard, etc. under protective atmosphere, incl. lid supply and screwing. Bottle feeder incl. set-up from above, lid feed from above. Make: Tölke DSN 1200 - DSN 700, approx. 300 bottles / hrs Y.O.M.: 1995 / 1998

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Hot counter/ hot display case with 5 bays 650x700 (GN2/1) and 2 glass doors front and rear for handling and removal. The display case is in a very good, cleaned and functional condition. Undertable also available on request, can also be used as Bain-Marie. Technical data: -External size: 980x870x1020mm. -Indoor size: 5x650x700mm. -elek. Voltage: 230V -Frequency: 50 Hz -elek. Power: 3.5kW. -Serial Number: 100010826

Cat.-Nr. 11-2920 in a very good condition Manufacturer: Raum Measurements: HxD: 3400 x 2200 mm Material: V2A - AISI 304, 1.4301 Surface: inside 2B=IIIC, outside marbled On the top: with Inlet with 2 x Transport Hooks Tank Body: with Sample Valve with Temperature Indicator with Clap with Manhole Lid 450x330 with Connector for Level Indicator with Outlet DN 80 The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

Cat.-Nr. 09-1020 in a very good condition Standard Features: • with Manhole DN 400 x 300 mm • with Outlet Discharge DN 50 mm (DIN 11851) • with 2 x Connections on Manhole DN 50 mm (DIN 11851) • with Level Indicator DN 10 with Valve • with Connecting Flange for Mixer • with Filling Tube DN 30 mm • with 2 x Transport Hooks • with Connection Thread Measurements and Weight: Diameter: 2800 mm Diameter Cyl. incl.Filling Tube: 3000 mm Total Height: 6700 mm Weight approx: 3 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Cat.-Nr. 08-1210 in a very good condition with flat bottom Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3231 (tank No. 402) in a very good condition description: outside: marbled – inside: 2B with Gaerspundanschluss with manhole in front 430 x 330 mms with probeer cock with clear expiry DN 65 with rest expiry with Einschweissflansch DN 65 with level indicator with strip and scale with leading holder with level ground with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3234 in very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole in front 430 x 330 mms with Sample Valve with clear expiry DN 65 with rest expiry with welding flange DN 65 with level indicator with strip and scale with leading holder with flat bottom with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3236 in very good condition cubically, very stable execution Description: outside: marbled – inside: 2B with fermenatation lock with manhole lid in front 430 x 330 mms with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level indicator with ladder rack with flat bottom with forwards pulled rest outlet Measurements: Width: 2,550 mm Depth: 5,000 mm Height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 09-1049-1 in very good condition Standard: Material: V2A (AISI 304) 1.4301 with cooling jacket only 300 mm high with input 1" AG with manhole top m.6 screws DN 50 and DN 25 with outlet DN 50 - output 1 1/4 AG with conical underbody Pressure resistant 1.5 bar Diameter: 115 cm Height: 125 cm Weight: 106 kg Supplement (please ask for price): Fermentation spandconnection DN 50 Fermented spundar fitting Trial tap CIP Cleaning Blind cap DN 50 Diving shaft/temperature sleeve The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-4 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 2,100 mms of weight: 136 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3320 in a very good condition for Cosmetik and Food Stuff Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-4 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 contents: 1,200 litres diameter: 1,000 mm total height: 1,980 mm weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Cat.-Nr. 11-1050 new COMPLETE For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Juice from Fruits and Vegetables Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper For emptying fruits or vegetables from wood or PVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2339 – Eurolux Automatic Continuous Belt Press EL-1000 for producing fruit juice and fruit wine, cider from apples, pears Capacity: up to 3000 kg/fresh fruits Cat-Nr 06-1101 – Eurolux Floating Lid Tanks in AISI 304 4 x 1000 Litres,4 x 500 Litres, 4 x 300 Litres Cat-Nr 10-2351 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 1500 Litres Juice/h Cat-Nr 10-2344 – Eurolux Bag-in-Box Filler EL-1800 For filling liquids (frui ...

Cat.-Nr. 11-3330 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

Cat. No. 11-4105 in very good condition Material: V2A - AISI 304, 1.4301- Surface: inside and outside 2B=IIIC Topsoil: with manhole pressure cap 1.5 bar test pressure DN 400 with 6 star head screws, with handle bracket, Threaded welding nozzle DN 50 Tank body: manhole 430x300 mm Underbody: Konusboden 45 with forward-drawn outlet pipe with disc valve DN 65, with forklift shoes, with stable frame, with pallet lift truck all sides underpassable. Test pressure: 1.5 bar Working pressure: 0.99 bar DxH: 1100 x 2200 mm - Weight: 230 kg Supplements/pieces (on request): Fermentation spandconnection DN 50 Euro Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our c ...

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3290 in a very good condition 5000 - 10,000 litres Measurements and weight: HxLxB: 75 x 130 x 30 cm weight: 85 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-3600-3 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 1000 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 1000 litres on the top: 800 litres Height on the ground: 2085 mm Height on the top: 1550 mm Total height: 3635 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobil ...

Cat.-Nr. 11-3405 in a very good condition LxHxW: 146x93x95 cm Weight: 200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-3600-4 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 500 litres Height on the ground: 1835 mm Height on the top: 1050 mm Total height: 2885 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.