muhr und bender used for sale

Unterstellbock HÖSEL HEBETECHNIK SEF 513 F Load capacity: 15000 kg Support surface: 1200 x 120 mm Support height: 820 - 1260 mm, adjustable in 10 steps used, tested ! As good as new ! Dimensions: 1320 x 700 x 820 mm

Very good machine from our demonstration pool. Few hours of operation or signs of use. The peeling machine is suitable for XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. With this machine, two cuts can be made at the same time in one operation, so that the processing can be twice as fast as with other models. Technical data: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 volts Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

Durable construction that facilitates maintenance work under all bridges. Thanks to the solid construction, it is possible to load a large number of tools or employees on the lower part. The machine equipped with large wheels in good condition, and hydraulic brakes makes it possible to move under and work without entering the bridge. Ixkmdlnmh Possible transport in Polish and Europe, of course, by prior arrangement. Wagon under the bridge - Specially developed trolley for work under bridges - Very stable construction - Everything in the price or you get a set - The trolley is controllable and equipped with air brakes - Dimensions approx. 12 meters long without pulling, drawbar approx. 1.5m. 2.5 meters wide and 3.1 meters high

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Julabo FL300 Recirculating Chiller in Undercounter Design 4.5 l The compact FL recirculating chillers are suitable for a wide range of cooling tasks and can be installed under the laboratory bench to save space. Features Ergonomic design and easy operation Splash-proof membrane keypads Large, bright LED temperature display Reliable Microprocessor PID Temperature Control Reliable, high-performance submersible pumps Permissible return temperature +80°C Easy filling and easy-access drain tap for easy emptying Under-level protection with visual and acoustic signal Integrated stainless steel bath vessels Easily accessible drain tap on the front No side vents: devices can be placed side by side RS232 interface for PC connection IP class according to IEC 60529: 21 Alarm output, potential-free changeover contact (max. 30 VA) Working temperature range: -20 ... +40 °C T ...

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l / min -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inside diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l / min -Pressure performance: 2.5 bar -Delivery head approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inside diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Output: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inside diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Output: 3000 l/min -Pump length: 960 mm -Flange outer diameter: 250 mm -Flange inside diameter: 125 mm -Pump diameter: 210 mm -Weight: 170 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm -Flange outer diameter: 250 mm -Flange inside diameter: 130 mm -Pump diameter: 175 mm -Weight: 235 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 5.8 kW -Output: 1500 l/min -Pump length: 1350 mm -Flange outer diameter: 250 mm -Flange inside diameter: 130 mm -Pump diameter: 210 mm -Weight: 170 kg

Electric heating, electric radiator, heating coil, electric tubular heating element, floor convector -Length: 3900 mm -Width (depth): 260 mm -Height: 145 mm -Price: per piece -Number: 2 pieces -Weight: 41 kg/piece

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

Gray cast iron underfloor box -Manufacturer: Bethmann lightning protection and lightning protection Kransteiner -Opening: 115 x 170 mm -Number: 3x available -Price: per piece -Dimensions: 272/195/H115 mm -Weight: 5.2 kg

The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

Comments: Engine Block with new bearings for cranshaft and camshaft. Including also some lose parts for Shortblock. Unfortunately Design Number and Service History unknown. Item Code: 1110434 Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 212 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Comments: can be used as Short/ Longblock - needs dev. overhaul Item Code: 1110006u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 312 Gas Type: Natural Gas Design No: B895 Eng Ser No: 4169021 Unit Ser No: 4169121 Orig PoOutput kWm: 646 YoM: 2004 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. C501 Depositmotor can be used as Short/Longblock - needs devinetiv overhaul! Item Code: 1110912u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 312 Gas Type: Biogas Design No: I810_1 Eng Ser No: 1010704 Orig PoOutput kWm: 392 YoM: 1998 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. B01 Depositmotor Item Code: 1110764u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 316 Gas Type: Natural Gas Design No: 5936 Eng Ser No: 1225455 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Crankcase with Camshaft and gear drive, Crankshaft is missing.Only 30k operating hours. Item Code: 1108860u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Biogas Design No: D851 Eng Ser No: 5030391 Orig PoOutput kWm: 1029 YoM: 2007 powerup.at - Technology is our drive. Efficiency our focus.

Comments: prebuilt engine - Version C Crankcase with crankshaft and Camshaft Item Code: 1108697o Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Offered are 3 pieces of used underride silos, with vertical ladder, blow-in line. 60 tons.

Household undercounter dishwasher VESTEL VES46056, defective, spare parts carrier

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

Description: Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet Saw blade diameter 420 mm Cutting range at 90 degrees: around 130 mm Cutting area at 90 degrees: flat 160 x 100 mm Cutting range at 45 degrees: around 110 mm Cutting area at 45 degrees: square 130 x 80 mm Speed 3000 rpm Motor power 2.0 KW Total power requirement 3.0 kW Machine weight approx. 190 kg Dimensions L x W x H 3,0 x 1,0 x 1,3 m weight approx.: 190 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,300 mm

- Installation JIG for PIP Underlayer - HP Part Number MJX-1336-51 - for HP Indigo Series 2 Machines

General SKU337U834 LocationBarneveld MakeQuadro Canada TypeU20 Underdriven Comill No.U20-0683 Year of construction2007 Main Features MaterialStainless steel Motor4 KW Width190 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizesDia. 190x120 mm Sieve sizesNo sieve. With hoppercheck InletDia. 200 mm OutletDia. 285 mm Motor4.0kW, 230/400Volt, 1440rpm With variable speed drivecheckwith frequency converter SpeedMax 1440 rpm MaterialStainless steel 1.4404 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck Total height1,8 m Weight250 kg CEcheck Floor space1,3x1,1 mMinerals & inorganicNew arrivalsAgrochemicalsSolid pharmaceuticsConfectioneryOther feedAnimal feedOther chemicalFine chemicalsSugarOrganicsCosmeticsOther pharmaceuticsGeneric medicinesSieve granulatorsFeed additivesCatalysts & fillersQuadro CanadaIndu ...

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pullmax section bender Type: hydraulic Dia of die mandrel: 110 mm Length : 1800 mm Depth: 1300 mm Height: 1800 mm Weight: 3,7 ton

Inv. Num. : 7529 Type: CNC BENDER EB-30 Producer: EHRT Created: 2005 Parameters: Control system: MICRO computer Maximum power: 300 kN

DATA ON THE MACHINE Machine type: Profile steel shears / unclinking machine Manufacturer: MUBEA Muhr u. Bender Model: BF11N Condition: used Price: 1,450 Euro net plus VAT Location Warstein , Germany Reference M-MUB-1220 Description We offer you a used profile steel shear from the manufacturer MUBEA Power 32t Weight approx. 1t Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Sheet thickness: 22,00 mm Bar diameter: 0 mm Punching size: 0 mm (1) hydraulic / (2) mechanical: 1   MACH-id   3615 MAKE   Mubea - Muhr und Bender - Sweden TYPE   HIW 1000 / 610 YEAR   2005 SPECIFICATIONS Throat  610 mm Maximum sheet thickness Steel   40 x 22 mm Stroke´s No./ Min.  0 - 70 DIMENSIONS Length   2200 mm Width   1050 mm Height   1830 mm

Muhr & Bender KBL 65-30 Optima B profile punching machine Type KBL 65-30 Year of construction 1975 Central lubrication Electrical triggering of the movement via foot pedal 5 tool stations Stop for long material Punch Punch 30mm in 17mm 24mm in 21mm Quick-change device for stamps Profile scissors 1. Z-profile 90° 140mm 2. Angle iron 90° 130x12mm 3. Square aisles 50mm 4. Round iron 55mm 6. T-iron 180mm 7. U-iron 90° 180mm 8. T-iron 90° 100mm Bar steel shears for material 45kp mm² strength 1. Flat iron up to max 60x28mm or 120x18mm 2. Angle iron 80x10mm 3. Square aisles 40mm 4. Round iron 45mm 6. T-iron 80x10mm 7. U-iron 100mm 8. T-iron 100mm Plate shears 1. with knife 13° = 13mm 2. with knife 2.5°= 140x9mm / 220x8mm 3. with knife 5° = 140x13mm / 220x12mm 3 phase current.- Frequency 50 Hz / 4 ...

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Catalogue-Nr 09-2060 in very good condition! Apex 1600 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red current Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt 1500 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Very ADDAX underground cable machine / New The cut range of 10 - 160 mm PVC, rubber, iron and lead cables can be processed. Drive: 15 hp/11 KW Weight: 1.3 T New ADDAX subterranian cable stripper can be used for cables with diameter of 10-160 mm out of pvc, rubber,iron and lead. Drive: 11 kw / 15 hp Weight: 1.3t Every time we have 12 different cable strippers on stock. New and second hand machines

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

Cat.-Nr. 10-1735 in a very good condition with Mixer on the top With Manhole on the top 400 mm With Airlock DN 300 With CIP Cleaning System With Inlet DN 50 With thread Connector DN 50 With Level Indicator With Mixer on the side With Conical Bottom with Outlet DN 50 On 4 Adjustable Feet Measurements: Total Height: 4000 mm Body Height: 2450 mm Diameter with out Mixer: 2400 mm Diameter with Mixer: 2800 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Cat. No. 11-1040 New For liquid with a density of 1350 kg/m3 Material: V2A - AISI 304, 1.4301 Surface: Ground Upper and underbody: Klöpperboden Cylinder body: with flange DN 100 with sight glass with rupsing disc with CIP line with spray head through. 90 mm made of V4A with cable for spunding machine DIN 40 with side manhole 509 x 372 mm with low-screw shut-off valve for residual and clear drain with digital thermometer with residual drain line through m. 2"1/2 with ladder bracket with transport eyelets height-adjustable with 4 calotte feet Technical data Dimensions (mm) Total height inside: 1592 mm Dia. inside: approx. 4600 mm Total height outside: 4605 mm Dia. outside: --- Roof 426 mm height 3.0 mm thickness Cylinder 3000 mm height 2.5 mm thickness Underbody 426 mm height 3.0 mm thickness Feet 600 mm hei ...

20 m3 silo for e.g. quartz sand, underpassable for spreaders, capacity 20 m3, payload approx. 36 tons, stand area 2,500 x 2,600 mm, outlet height from 1,700 - 2,000 mm, height 7 - 8 m

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...