muhr und bender used for sale

Tragrolle(n) industrial-grade diameter 80 mm length 500 mm steel ball bearings loads up to 200 kg Support rollers are suitable for heavy duty roller conveyors, roller supports, machine feeders etc. the roles are used but undamaged and have some light surface rust. the entire length of a roll is approximately 540 mm, the shaft has a diameter of 14 mm and an Aussparungvon ca. 10 mm on the shaft ends

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...

RECON Crankshaft -1 level undersize -Operating hours: 0h ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

Now available: Wartsila 8 cylinder L32 crankshaft RECON All main journals ground to -1,00 mm undersize, crankpins to remain standard size with counterweights with drive gear with Class certificate (DNV) Available from stock (ex. Warehouse Bengi NL) Price upon request

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

Hazardous material Cabinet, Safety Cabinet Manufacturer: Düperthal Type: 2.22.925-3 DIN 12925, part 1 Dimensions: width x depth x height (approx. 120 x 60 x 193 cm) 2 door with 3 adjustable shelves without a key automatic closing small Fender Bender All information without guarantee

MCM Clock 600 14 pallet 500x500 CNC FANUC 16iM 15000 RPM Jfmx Supervisor centro di lavoro multipallet FMS multipallet horizontal machining center in FMS under power in our warehouse Mimu machine tools (Italy)

Many thanks for your interest in our chocolate conche plant, please find below our offer Nagema conching plant - available from south-east europe, consisting off: 2x Nagema conches 3000kg, electrical power 60 kw 1x Nagema Conches 1000 kg, electrical power 25 kw 1x Nagema Conches 1000 kg, electrical power 25 kw, missing Gearbox 1 x Conche 400kg, electrical power 12,5 kw & 1x Tank 5000kg, electrical power 7 kw Machines are installed and under electrical energie We offer this machine in 'as is' condition, ex location Bulgaria Also possible to sell single machines from this Plant. Also in as-is condition, ex location Bulgaria. 1x Nagema Conches 1000 kg, electrical power 25 kw 1x Nagema Conches 1000 kg, electrical power 25 kw, missing Gearbox 1x Nagema conches 3000kg, electrical power 60 kw: 1x Conche 400kg, electrical power 12,5 kw together with Tank 5000kg, elect ...

1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.

Technical details TYP/Model: Formmaster 6/30 Table surface: 600 x 300 mm Table adjustment lengthwise: 700 mm Cross: 300 mm Grinding area: 600 x 300 mm Grinding height max: 300 mm Magnet: 600 x 320 mm Grinding slices: 220 x 25 x 52 mm Automatic vertical delivery: Yes Connection: 8 kW Accessories: Auto. Vertical delivery; Full enclosure, magnet, Wet grinding; Depulsion for grinding discs Condition: Good Addition: The machine can be visited in our warehouse, not currently under electricity! Weight: 2.6 t Dimension machine about: 2,700 x 2,200 x 2,500 mm Subject to change and error in the technical details and details.

Jupiter JU 45 Walter Plant Machines Nr: + # 2055 Number of baking tongs 45 Upper engraving 5 x 5 mm Underengengravings 5 x 5 mm Edge yes Tool 22 ° Gas Propan Location: Germany The machine is used to make sweet, rotated squirrels with or without a rim and is sold with a tool for 22 °. The conveyor belt and stacking table are included. The machine is currently in storage.

The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...

The CD100 series of water and water jet machines ranges from 250 to 2050 bar with pump flows from 21 to 167 l/min. The pump is powered by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel to ensure long service life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are equipped with rubber feet under all four corners and the machine has forklift pockets as well as hanging eyelets at all four corners. The machines have galvanized roof panels with side railings for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1 ...

Neri BLB 400 V2T self-adhesive labeller for applying labels to the top and underside of cartons with 2 label dispensers. Carton size range: min. 20 x 15 x 70 mm, max. 180 x 120 x 200 mm. Label roll diameter max 400 mm, label roll core 40 mm. Siemens SIMATIC S7-300 PLC controller with Siemens Touch Panel Electrics 400 V/ 50 Hz, max. draw 4 KW, compressed air 6 bar Infeed height 820 bis 950 mm Machine dimensions approx. 2500 x 2000 x 2250 mm (LxWxH), weight approx. 1000 Kg, Output up to 200 cartons per minute (2 machines available)

CNC,5 axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min, Force (N) 9000 Acceleration 4.5 m/sec2 Y-3000 Speed up to 60m/min, Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min, Force (N) 9000 Acceleration 7.2 m/sec2 C - +/- 200 Straight , Torque 1200Nm ,Max torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm, Max torque with clamped axle 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 Kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write an e-mail. Machine is immediately available and in case of serious interest can be visited under power An invoice with VAT will be issued

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

Kiesserling Press, mechanic press, 500T, table 2900 x 1550mm under power

-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity

GABO EPLEXOR® Bench Test Machine Here we offer you a GABO EPLEXOR® bench test machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties in Dependence of temperature, frequency and mechanical stress EPLEXOR Series Test Systems® enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to Composites, metals, glasses, ceramic materials, Biomaterials and food, up to adhesives, plastic Masses and liquids. Areas of application are: DMTS/DMTA/DMA Analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing Dynamic component testing Rheology The Method of Dynamic Mechanical Spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical vibrations for the deformation of the test specimens. The samp ...

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Weight Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Operating hours: 23546 Technical data Number of axis total: 5 Table length: 920 mm Table width: 380 mm Number of T-channels: 7 Distance of the T-slots: 50 mm T-channel width: 12H8 mm Table load max.: 250 kg Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 350 mm Vertical travel (z axis): 610 mm Tool magazine number of tools: 24 Tool diameter max.: 63 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 175 mm Max. tool-weight: 1.5 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: HSK: E40 / DIN 69893 Distance spindle nose to table: 97 - 704 mm Spindle speeds: stepless from: 30 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Voltag ...

Multivac R 530 , built 2007 , film width 460 mm , print 480 mm , hard foil , M+R under-track labeler , 1000 ccm booster pump , Very good condition.

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 0 Technical data Table length: 700 mm Table width: 500 mm Number of T-channels: 5 Distance of the T-slots: 100 mm T-channel width: 18H7 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 540 mm Tool changer: Number of tools: 24 Tool diameter max.: 77 mm Diameter with free adjacent pockets: 115 mm Tool lenght: 305 mm Max. tool-weight: 6 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: ISO: B40 Vertical spindle speeds: stepless from: 100 rpm up to: 10000 rpm Rapid traverse: long.: 24 m/min Rapid traverse: transversal: 24 m/min Rapid traverse: vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 12  ...

Used tappatotor AVE 6T LUX cap. Speed: 10,000 bph. Direction: Time. 6-headed round-the-rail. Head for lux cap application. Machine management via plc siemens s7 and touch screen. Machine-side dashboard. Safety protections under EC.

Graule Train saw Cutting width 200mm Cutting height 80mm Engine 230V G&-4063-o0624 Underframe optional

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 27052 Technical data Number of axis total: 4 Number of spindles: 1 Table load max.: 500 kg Longitudinal travel (X-axis): 560 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 850 mm Diameter: 630 mm Table divisions (B): 360 ° Resolution: 0.001 ° Table speed: 40 rpm Holding torque of the table: 1580 / 2300 Nm Torque max.: 1550 Nm Pallets chanching device: Length: 400 mm Width: 400 mm Maximum workpiece weight: 500 kg Tool changer: Number of tools: 120 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 400 mm Max. tool-weight: 12 kg Spindle nose: HSK: 63 DIN 69893 Form A Spindle diameter: 225 mm  ...

Hydraulic Press 800 T Very good condition Under power

Hydraulic Press 1300 T force very good condition Under power

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 12463 Technical data Number of axis simultaneous: 3 Table length: 700 mm Table width: 630 mm Table load max.: 800 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 30 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Rapid traverse:: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Time under power: 43869 Hour Operating time: 12463 Hour Working time: 26214 Hour Spindle run time: 8612 Hour Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dim ...

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...