muhr bender used for sale

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Hydr. Flat, - Profile and bar steel shears with cut-out device and punch punch Offer number: 15229 Make: MUHR + BENDER Type: KBLH 700 Machine no: 01562869552445 Built: 1986 Technical data: - two separate working cylinders, - it can be used at two workstations - work at the same time - Flat steel shears - knife length 520 mm - for flat material 500 x 18 mm - Profile steel shears - L- steel at 90° 130 x 12 mm - at 45° 90 x 10 mm - T-steel at 90° 180 mm - Bar steel scissors - Round steel 65 mm - Square steel 60 mm - Cut-out device - rectangular tool for material up to 12 mm - Punching hole - Punching force approx. 700 KN - Stroke infinitely variable 0 - 75 mm - punches in steel up to 30 mm in 20 mm - Extension 510 mm - Hydraulic drive 400 V / 8.5 kW - Space requirement approx. W 1850 x H 2100 x D 750 mm - Weight ...

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t : 150 x 16 mm stroke: 28 mm : 12 mm plate length: 250 mm square edge steel: 45 mm round bar steel: 50 mm sheet thickness: 13 mm total power requirement: 3,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1,8 x 1,0 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 200 mm plate thickness: 6 mm flat steel: 70 x 7 mm round bar steel: 13 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 800 x 500 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching diameter: 30mm, max. punching force: 500kN, throat depth: 610mm, stroke: 0-60mm, weight: 1.69t.

: 220 V frequency: 50 Hz combination machine: . extensive accessories: ca. 50 Sätze pressure: 50 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

Plate bender Heidelberg, fit\'s from size 52 up to 105, max. plate lenght 811 mm; Ready for operation

Key data: 105

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Horizontal and vertical:Horizontal  Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         265mm Capacity flat:         120 x 15 x R=2000 mm Capacity Tube:         114 x 3 x R=1200 Ø x mm Capacity T-Profile:    80 x 80 x 8 x R=1200 mm Working speed:         1-24 mm/min. Length:                1.500 mm  Width:                 1.200 mm  Height:                1.400 mm  Weight:                1.150 ...

Rounds: 120 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH - ID 6413 Make: HAEUSLER Type: HPR 13 V+H YOP: 1985 Hydraulic side roll support Optical readout position side rolls Roll set for UPN 140 Roll set for T 120 Roll set for L 120 Roll set for Square 70 x 70 Horizontal and vertical:H + V  Shaft Ø:               120mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Resistance moment:     90CM³ Length:                2.200 mm  Width:                 2.300 mm  Height:                1.90 ...

Rounds: 60 mm Squares: 0 mm Flats: 80 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   3 roll driven 177 mm roll diameter Hydraulic opperated lower rolls adjustment Digital readout position lower rolls Guide rolls lwft and right Horizontal and vertical:H + V  Shaft Ø:               60mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Capacity flat:         80 x 25 x R 1200 mm Capacity Tube:         60,3 x 3,2 x R 1000 mm Capacity T-Profile:    50 x 50 x 5 x R 500 mm Working speed:         5mm Length:                1.000 mm  Width:    ...

Rounds: 200 mm Squares: 0 mm Flats: 120 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Shaft Ø:            200mm Number of rolls:    3 Stroke X-Axis:      700mm Capacity flat:      120 x 50 x 2000 mm Capacity Tube:      133 x 6,0 mm mm Capacity bar:       80 x 80 x 2000 mm Capacity T-Profile: 120 x R 1500 mm Capacity HEA-Profile:320 x R 1600 mm Working speed:      4500 - 9000 mm Adjustment siderolls:550 Length:             3.000 mm  Width:              2.500 mm  Height:             2.500 mm  Weight:             5.100 kg   

Rounds: 60 mm Squares: 0 mm Flats: 70 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   Horizontal and vertical:H + V  Shaft Ø:               60mm Number of rolls:       3 Resistance moment:     10CM³ Capacity flat:         70 x 12 x R 600 mm Capacity Tube:         76,1 x 2,9 x R 1200 mm Capacity bar:          40 x 40 x R 600 mm Capacity T-Profile:    70 x 70 x 8 x R 700 mm Working speed:         5,2 M/Min mm Length:                1.000 mm  Width:                 1.200 mm  Height:                1.200 mm  Weight:     ...

Rounds: 105 mm Squares: 120 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   PBT - INDUMASCH 25 Profile bender 25 Ton stroke X = 265 mm MACH - ID 6371 Make: PBT Type: INDUMASCH 25 Control: PBT PC 50 YOP: 2014 Horizontal and vertical    Horizontal Shaft Ø     105 mm Number of rolls    3 Stroke X-Axis      265 mm Capacity flat    120 x 15 x R = 2000 mm Capacity Tube114 x R = 1200 mm Capacity T-Profile80 x 80 x 8 x R 1200 mm Length    1.500 mm Width      1.200 mm Height     1.400 mm Weight     1.150 kg

Rounds: 130 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   IMCAR - RAD PIR Pyramidal Straightening Machine Flange ø 309mm x 100mm MACH - ID 6356 Make: IMCAR Type: RAD PIR YOP: 1999 Horizontal and vertical     Horizontal Shaft Ø    130 mm Number of rolls     3 Horizontal       Horizontal Working speed       0 - 5 mm pyramidal straightening machine with 450 rol diameter Flange ext. ø 309mm, thickness 18mm (material iron) Flange ext. ø 360mm, thickness 35mm (material iron) Flange ext. ø 330mm, thickness 35mm (material iron) Flange ext. ø 170mm (material teflon)  Flange ext. ø 309mm, thickness 18mm (material iron) Flange ext. ø 360mm, thickness 35mm (material iron) Flange ext. ø 330mm, thickness 35mm (material iron)  ...

Rounds: 130 mm Squares: 0 mm Flats: 00 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id     5562 MAKE         PBT TYPE          HELIX YOP            1998 SPECIFICATIONS Shaft   Ø130 mm Number of rolls      3 Stroke X-Axis      440 mm Control       BC 100 DIMENSIONS Length        2500 mm Width          2200 mm Height         2000 mm Weight         6500 kg

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id      5561 MAKE           PBT TYPE             35 YOP               2007 SPECIFICATIONS Shaft Ø   105 mm Number of rolls        3Stroke X-Axis           390 mm DIMENSIONS Length       2000 mm Width        1860 mm Height       1420 mm Weight       2500 kg

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id    5347 MAKE         ROUNDO Sweden TYPE           R-4-S YOP              1988 SPECIFICATIONS Horizontal and vertical       H + V Shaft Ø        105 mm Power         11 kW Number of rolls        3 DIMENSIONS Length         1500 mm Width           1500 mm Height         1500 mm

Rounds: 225 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id      5165 MAKE          ROUNDO TYPE            R3 YOP             1995 SPECIFICATIONS Hydraulic / Mechanical       Hydraulic Horizontal / Vertical / or H + V      H + V Shaft Diameter ø     75 mm Roll diameter ø    225 mm Shaft length     100 mm Working speed M/Min.   1-5 M/min. Capacity IPN    140 x 750 mm Capacity Tube walltickness x Ø 60 x 750 mm Capacity  Flatt      75 x 75 x 750 mm Resistance moment Cm     314 Cm3 Power      4 kW DIMENSIONS Length      2000 mm Width& ...

Rounds: 180 mm Squares: 0 mm Flats: 0 mm Flats on edge: 00 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id    5346 MAKE        ROUNDO Sweden TYPE          R-6-S YOP            1992 SPECIFICATIONS Horizontal and vertical        H + V Shaft Ø     180 mm Power      15 kW Working speed       0-7 mm/min. DIMENSIONS Length        2400 mm Width          2000 mm Height         2000 mm

Rounds: 162 mm Squares: 60 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   MACH-id       5012 MAKE            BPR Italia TYPE              Z - 402 YOP                 2017 SPECIFICATIONS Power          1.1 kW Horizontal / Vertical / or H + V       H + V Shaft Diameter ø       40 mm Roll diamter ø     162 mm Shaft length     94 mm Capacity IPN       60 x 10 x 600 mm Capacity HEB       60 x 60 x 6 x 700 mm Capacity Tube walltickness x Ø       60 x 2,9 x 600 mm Capacity Flatt         60 x 10 x 600 mm Hydraulic / Mechan ...

Rounds: 530 mm Squares: 0 mm Flats: 150 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id    5005 MAKE         Boldrini Italia TYPE           BSA 36 YOP            SPECIFICATIONS Power        12 kW Horizontal / Vertical / or H + V    Horizontal        Shaft Diameter ø       235 mm Roll diamter  ø     530 mm Shaft length      360 mm Resistance moment Cm     3166 Cm3 Capacity IPN     220 x 4500 mm Capacity HEB      160 x 2500 mm Capacity Tube walltickness x Ø  160 x 5 mm Capacity Flatt      150 x 40 mm Hydraulic / Mechanical      Mechanical Working  ...

Rounds: 105 mm Squares: 300 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id   4183 MAKE       PBT Swiss TYPE         25 YEAR        2012 - 1097 Hours SPECIFICATIONS Hydraulic / Mechanical      Hydraulic Horizontal / Vertical / or H + V       Horizontal Shaft Diameter ø   105 mm Shaft length        300 mm Working speed  M/Min.1 - 24 M/Min Resistance moment Cm    31600 Nm Cm3 Capacity IPN      160 mm Capacity HEB  120 mm Capacity Tube walltickness x Ø  114 mm Capacity Flatt    120 x 15 mm Power    3 x 1,1 kW DIMENSIONS Length       1480 mm Width        1200 mm Height&nb ...

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id      3629 MAKE           PBT Swiss TYPE            35 YEAR          2004 SPECIFICATIONS Hydraulic / Mechanical    Hydraulic    Horizontal / Vertical / or   H + V     Horizontal Shaft Diameter ø  105 mm Roll diamter ø    Stroke = 390 mm Shaft length    Adj = 360 - 1100 mm Working speed M/Min.    1 - 16 M/Min Resistance moment Cm 3  Torq = 3000 Nm Cm3 Capacity IPN   IPE 160 x R = 1000 mm Capacity Tube walltickness x Ø114 x R = 300 mm Power   11 DIMENSIONS Length    1850 mm Width     1600 mm Height  &nbs ...

Rounds: 40 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id  356 MAKE  PBT Swiss TYPE   ARKUS 12 + PC 200 YEAR   1999 SPECIFICATIONS Hydraulic / Mechanical  Hydraulic Horizontal / Vertical / or H + V   Horizontal Shaft Diameter ø  40 mm Shaft length  130 mm Working speed M/Min.  1 - 32 M/Min Resistance moment Cm   3500 Nm Cm3 Capacity IPNIPE 80 x R 500 mm Capacity HEBUNP 80 x R 400 mm Capacity Tube walltickness x Ø  2" x R 300 mm Capacity Flatt  70 x 12 x R 300 mm Power  3 x 0,37 kW DIMENSIONS Length   1125 mm Width   1000 mm Height  1200 mm

Rounds: 219 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id   3514 MAKE   PBT Swiss TYPE   HELIX YEAR   1998 SPECIFICATIONS Controll  PC 200 Touchscreen with INTERPOLATION Hydraulic / Mechanical   Hydraulic Capacity Ø x plate thickness  219 mm Press force   65 Ton Stroke   445 mm Working speed  1 - 8 Power 22 kW DIMENSIONS Length   2500 mm Width   2165 mm Height  1800 mm

Rounds: 900 mm Squares: 300 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   SPECIFICATIONS Hydraulic / Mechanical  Hydraulic Shaft Diameter ø40 mm Shaft length  100 mm Working speed M/Min.1 - 30 M/Min Capacity IPN 60 x R 900 mm Capacity Tube walltickness x Ø60 x R 600 mm Capacity Flatt 30 x 10 x R 300 mm Power0,75 DIMENSIONS Length 1125 mm Width 1000 mm Height 1000 mm  

Rounds: 256 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 2   SPECIFICATIES Werking Hydraulisch / Servo / Mechanisch Hydraulic Horizontaal en of verticaal  H + V As diameter Ø 40 mm Rol diameter Ø 256 mm As lengte in mmStroke 200 mm Buig capaciteit IPN 80 x R 800 mm Buig capaciteit HEB 60 x R 900 mm Buig capaciteit Buis 60 x R 600 mm Buig capaciteit Massief 30 x 10 x R 300 mm AFMETINGEN Lengte 1000 mm Breedte 1000 mm Hoogte 1200 mm

Hydraulic profile bending machine make ROUNDO type R 4Year of construction 1978Technical specifications:max. section modulus b. Tensile strength 42 - 50 kg: 30 cm³Roll diameter: 275 mmStepless roller speed: 0.0 - 7.0 m / min.Performance examples L: 90 x 9 dia. 900 mm: T: 90 x 10 dia. 900 mm: flat: 100 x 18 dia. 800 mm: flat upright: 200 x 30 dia. 800 mm: Square iron: 55 x 55 dia. 550 mm: Round iron: 60 dia. 600 mm: Double T: INP 160 drm. 800 mm: U-iron: UNP 160 dia. 800 mmWeight approx .: 2.4 tExternal dimensions approx .: 1400 x 1240 x 1210 mmDrive power: 5.5 kWWith- Standard tool- Swiveling control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Manually adjustable profile iron bending machine make MD Durst type UP 25 plusTechnical specifications:Bending roller carrier shaft speed: 10 rpm.driven bending roller carrier shafts: 2 pcs.adjustable bending roller support shafts: 1 pc.Bending roller trunnion dimensions: 25 x 70 mmStandard bending roller diameter: 84 mmAngle steel: 25 x 25 x 3.0 mmT-steel: 25 x 25 x 3.5 mmU-iron: 30 x 15 x 4.0 mmFlat Bar: 304.0mmFlat bar upright: 50 x 8.0 mmSquare bar: 16 x 16 mmTubes:1/2 / 1/8Drive power: 1.1 kWWeight approx.: 350 kgExternal dimensions approx.: 635 x 300 mmWith- 1 complete set of bending rollers- 1 set of flat bar bending rollersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

Profile bending machine make ZOPF type ZB 70 / 2MMachine -No: 00475 built in 2000Technical specifications:Bending performance flat material: 60 x 10 mmor upright: 100 x 15 mmSquare material: 35 x 35 mmL profile: 50 x 50 x 6 mmT-profile: 60 x 60 x 6 mmShaft Diameter: 40mmRoller diameter: 152 / 162 mmShaft revolutions: 8.5 rpm.Drive power: 1.1 kWApprox. weight: 395 kgDimensions approx.: 900 x 600 x 1100 mmwith- CE marking- 7 sets of tools- 2 powered rollers- manual infeed of the upper rollerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rounds: 430 mm Squares: 140 mm Flats: 135 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Simasv 125 Type CHP 125 Year 2002 Hydraulic heavy duty profile bender Outside diameter max. (mm) Shaft = 135 Inside diameter max. (mm) Roll = 430 Max. pipe length (mm) Speed = 0 - 7 M Max. angle Flatt = 140 x 30 Wall Thickness (mm) Tube = 168.3 x 5 Weight = 6.900 Kg incl. hydr. side supportincl. dro position rolls  

Rounds: 105 mm Squares: 390 mm Flats: 120 mm Flats on edge: 15 mm Angles: 10 mm (1) horizontal / (2) vertical: 1   Shaft Ø:          105mm Number of rolls:  3 Stroke X-Axis:    390mm Resistance moment:3000 NmCM³ Capacity flat:    120 x 15 x R-1200mm Capacity Tube:    114 x 6,3 x R-1200Ø x mm Capacity bar:     80 x 80 x R-1400mm Capacity T-Profile:100 x 100 x 10 x R-1600mm Working speed:    1 -16.000mm/min. Length:           2100mm Width:            1860mm Height:           1420mm Weight:           2300kg

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Roundo R 5 S Type R 5 S Year 1989 Section modus 48 cm3 Outside diameter max. (mm) Roll = 385 mm Inside diameter max. (mm) Power 7.5 kW Max. pipe length (mm)Flatt 100 x 30 Max. angle U over Y = 200 Wall Thickness (mm)U over X = 100 Speed 0 - 7 M/min.Set with rolls Hor. & Vert. opperated  

Motorized sheet metal bender Useful length 2000mm Maximum bending of iron sheet at 2000mm 3mm thickness

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Zopf 80 mm Type ZB 80 / 3 H Year 2009 profile bender / profil walze Sheet thickness (mm)Shaft = 80 mm Bending length (mm)152 / 162 / 193 Number of rolls Digital read out Accuracy Y axes 1/100 Universal set rolls  

Rounds: 188 mm Squares: 65 mm Flats: 0 mm Flats on edge: 0 mm Angles: 60 mm (1) horizontal / (2) vertical: 1   Make Roundo R2 Type R 2 Year 1995 Roll = 188 mm Outside diameter max. (mm)Shaft = 65 mm Inside diameter max. (mm) 3 rolls driven Max. pipe length (mm)Bend section 7 cm3 Max. anglePower 2.2 kW Wall Thickness (mm) Optical readout Angle 60 x 60 x 6 x 600 IPE 100 x 500 mm T 60 x 60 x 7 x 600  

Rounds: 225 mm Squares: 75 mm Flats: 0 mm Flats on edge: 0 mm Angles: 75 mm (1) horizontal / (2) vertical: 1   Make Roundo R3 Type R 3 Profile bender Year 1985 Roundo R 3 Horizontal and vertical profile bender Outside diameter max. (mm)Angle 75 x 75 x 7 Inside diameter max. (mm)IPE 140 x 700 Max. pipe length (mm)Shaft 75 mm Max. angle Rolls 225 mm Wall Thickness (mm)Cap. 14 cm3 Remote control  

Rounds: 400 mm Squares: 200 mm Flats: 0 mm Flats on edge: 0 mm Angles: 140 mm (1) horizontal / (2) vertical: 2   Make Schaeffer SPVRM Type SPVRM 65 / 140 Year 1974 Fully hydraulic Shaft = 200 mm Sheet thickness (mm) Roll = 400 mm Bending length (mm) U Profile 280 Number of rollsAngle 140 x 140 x 13 Speed 0 - 10 M/min. Adjustment rolls 450 / 600 mm Power 400 v / 30 kW- 3 hydr. adjustable rolls - 1 fixed lower roll - Digital redaout - Package with rolls / tools  

Rounds: 200 mm Squares: 1500 mm Flats: 2500 mm Flats on edge: 1500 mm Angles: 320 mm (1) horizontal / (2) vertical: 2   Horizontal and verticalHorizontal Shaft Ø200 mm Number of rolls3 Stroke X-Axis320 mm Capacity flat95 x 95 x R = 2500 mm Capacity Tube133 x 6 x R = 1500 Ø x mm Capacity T-Profile120 x R = 1500 mm Capacity HEA-Profile120 x R = 1500 mm

Rounds: 100 mm Squares: 100 mm Flats: 100 mm Flats on edge: 100 mm Angles: 80 mm (1) horizontal / (2) vertical: 2   Cast iron face plate diameter 1000 mm Double suppport rolling slide Rotation face plate 0 - 10 U/Min For HOT & Cold bending jobs Hardned & Grounded guideways Cast iron extra table 1600 mm Horizontal and vertical:Vertical Number of rolls:       2 Stroke X-Axis:         1200mm Capacity flat:         80 x 20mm Capacity bar:          65 x 65mm Capacity T-Profile:    100 x 100mm Working speed:         2/3/5mm/min. Adjustment siderolls:  200 Length:                3470mm Width:                 1600mm Height:      ...

Rounds: 1 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Clamping size: 20 - 170 mm Clamping prism Wall thickness 25 mm in one pass Feed travel 100 mm Turning speed  40 - 100 Rpm The pipe is clamped with a self-centering prism clamp (for which no spare parts are needed). The prism clamp can handle the entire clamping range of the machine. The specially developed chisel set allows the machining of all pipe sizes within the range of the machine. Without having to adjust chisels again and again. Thanks to the stability of the machines, every finishing operation is the same. This promotes the welding result, which is of the greatest importance when welding with, for example, a welding robot. Length:1250mm Width:980mm Height:1650mm Weight:1450kg

Rounds: 105 mm Squares: 105 mm Flats: 105 mm Flats on edge: 105 mm Angles: 105 mm (1) horizontal / (2) vertical: 1   Horizontal and vertical:Horizontal Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         265mm Capacity flat:         50 x 10 x r = 300mm Capacity Tube:         114 x r = 2000Ø x mm Capacity bar:          60 x 60 x r= 1000mm Capacity T-Profile:    70 x 70 x 8 x r = 1000mm Capacity HEA-Profile:  120 x 120 x r = 1800mm Working speed:         24mm/min. Length:                1600mm Width:                 1200mm Height:            ...

Rounds: 3 mm Squares: 2000 mm Flats: 2000 mm Flats on edge: 1000 mm Angles: 120 mm (1) horizontal / (2) vertical: 1   Horizontal and vertical:Horizontal Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         0 - 300mm Resistance moment:     1600 NmCM³ Capacity flat:         120 x 15 x 2000mm Capacity Tube:         114 x 2000Ø x mm Capacity bar:          60 x 60 x 1000mm Capacity T-Profile:    IPE 120 x 1800mm Working speed:         8 / 12 / 24 000mm/min. Length:                1500mm Width:                 1200mm Height:            ...

Rounds: 3 mm Squares: 120 mm Flats: 120 mm Flats on edge: 120 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Tauring - DS 120 MACH-ID 7641 Make: SAF Tauring Type: DS 120 Year: 1986 Horizontal and vertical:H + V Shaft Ø:               120mm Number of rolls:       3 x 315 Capacity flat:         120 x 45 x 750mm Capacity Tube:         180 x 3 x 2500Ø x mm Capacity bar:          80 x 80 x 300mm Capacity T-Profile:    120 x 120 x 13 x 2500mm Working speed:         0 - 5mm/min. Length:                1600mm Width:                 1800mm Height:               ...

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Horizontal bending machineSimasv - T 95 MACH-ID 7640 Make: Simasv Type: T 95 Year: 1994 Show price REQUEST QUOTATION Table Length:         1900mm Table Width:          880mm Max. pressing force:  95 Beam stroke:          330mm max. work piece height:200mm max. die height:      250mm Working speed:        1000mm/min. Return speed:         2500mm/min. Power:                7.5kW Capacity flatt:       120 x 180 x 5mm x mm Capacity bar:         120 x 120 x 5mm Length:               2000mm Width:  ...

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machinePBT - ARKUS 12 PC200 MACH-ID 7647 Make: PBT Type: ARKUS 12 PC200 Control: PC 200 TOUCH Year: 2000 Horizontal and vertical:Horizontal Shaft Ø:               40mm Number of rolls:       3 Stroke X-Axis:         200mm Capacity flat:         70 x 12 x R=700mm Capacity Tube:         60 x R=600Ø x mm Capacity bar:          30 x 30 x R=300mm Capacity T-Profile:    60 x 60 x 7 x R=800mm Working speed:         0-18mm/min. Length:                1125mm Width:                &nbs ...

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Curvatrici - CS 60  Digitral readout position upper roll Left & Right mode Horizontal & vertical positioning 3 sets off rolls included Hydraulic adjustment upper roller Horizontal and vertical:H + V Shaft Ø:               50mm Number of rolls:       3 x 165 mm Horizontal:            Horizontal Stroke X-Axis:         200mm Capacity flat:         60 x 12 x 800mm Capacity Tube:         2" x 800Ø x mm Capacity bar:          35 x 35 x 800mm Capacity T-Profile:    60 x 60 x 900mm Working speed:        & ...