mtu 2000 used for sale

with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome -plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx -d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight -mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/ - 5 % Images are examples of a machine of the same design

Type: 2280ENC Multifix gereedschapshouders 1 bril Swing over bed: 600 mm Swing over cross-slide: 390 mm Distance centre tot centre: 2000 mm Spindle cone: D-1-8 Dia of spindle bore: 80 mm Power on the spindle: 7,5 kW Number of speeds: 91 > 1800 rpm Command: Fagor Length: 3760 mm Width: 1830 mm Height: 2260 mm Weight: 3,2 ton

The Ulbricht VKTHZ 2000 vacuum cooling tumbler has a maximum fill capacity of 2,000 kg of meat and additivesThe machine is designed for the industrial processing of meat products and is used for tumbling, massaging, marinating, and cooling products under vacuum., The plant has Siemens S7-300 controller with Siemens Touch Panel TP177A. Through the operator interface, recipes, automatic programs and process parameters can be managed. According to the operating instructions, among other things, speeds, temperatures, vacuum, total time, rotation times for left- and right-hand rotation, as well as pause, vacuum and aeration times can be set., The machine is sold without vacuum pump!, The container drive is supplied by a Siemens geared motor with frequency inverter and electric brake. The construction is solid; the nameplate indicates a machine weight of 3.650 kg out. The machine stands on a s ...

4-roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

General SKU291Y480 MakeIKA Werke TypeLR-2000 VP7 LocationBarneveld Pressure Working pressure0.03 Bar Vacuum possiblecheck Main Features MaterialGlass Volume2 Ltr. Motor0.63 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity2 l Vessel sizesDia 200 x 200 mm Dished bottomcheck Dished top sidecheck Top connections5 x Outletcheck With jacketcheck Max. temperature230°C With anchor stirrer(130 W, 530 rpm) With turbo stirrerIka Ultra- Turrax (500 W, 24000 rpm) Speed mixing shaft240 rpm MaterialGlass With jacketcheck General With switchgear(as is) Floorspace0,3 x 0,4 m Total height0,5 m Weight50 kg Extra Specifications- with heating bathOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts &  ...

Bottle formats: diameter approx. 20–40 mm, height approx. 45–70 mm, depending on the format set Capacity approx. 6000 bottles/h With format set for round bottle Ø 24 mm x length 52 mm Feeding hopper with lifting device Alignment for the correct positioning of the bottle on the conveyor belt (e.g. filling machine) 240V/50 Hz

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

Manufacturer: Stork Year of manufacture: 2005 Model: S-2000-850 Type of machine: Injection Molding Machine Technical Details : - Tonnage: 200t machine - Running hours: 40,048 - Power supply Q1: 400 V, 50 Hz, 3 Ph, N - Current Q1: 282 A - Control voltage: 24 V DC - Max oil pressure: 210 Bar g - Max air pressure: 8 Bar g - Injection weight: 4,000 kg - Options: 1 extra hydraulic core - Options: 6 air valves - Options: 1 air valve for steering the mould ejector needles Find more here - .ucymachines/ Contact us at - sales@ucymachines

CONTROLS   PLC SIEMENS SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1300 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3100 mm   space requirements -front/back-: 1500 mm   total height: 2200 mm   total weight approx.: 3000 kg The system deburrs both sides - Double-sided machining, dry - Material thickness 0.8 - 100 mm Equipment: - 1 feed roller conveyor - 15 replacement brushes Optional: - Exhaust air filter at a price of EUR 4000

Key data: 395 mm, 450 mm

6-axis CNC turning center Control: SIEMENS Sinumerik 828D incl. OPERATE + PPU290 Flat guides in all axes Main and sub-spindle Max. speed: 6,000 1/min 12-station turret (all driven) Speed of tools: 5,000 1/min Y-axis B-axis Travel: X= 235, Z= 580, Y= +- 52.5, W= 580 mm Bar Passage: 67 mm incl. tool package Chip conveyor

Three-phase oil-filled transformer, not used, year of manufacture 2009, Manufacturer MF Trasformatori s.r.l. Rated power 2000 kVA, Cooling: ONAN, Frequency: 50 Hz, Total weight 4680 kg, Primary side: Voltage 6000 V, Current 192.4 A, Secondary side: voltage 2x725 V, non-current 2x796 A

Manufacturer: PIERCE Model: RUR 2000 Year: 2016 Condition: Used Stock number: 9505 Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 25 mm Plasma Source: Formica 130 Plasma can also be burned using the oxygen-fuel process up to a layer thickness of 100 mm. Equipment: Suction Kompresso Wrykrys Program

sheet width: 2025 mm plate thickness: 3.0 mm distance between columns: 2050 mm no. of strokes: 38 Hub/min cutting angle: 1.38 ° Control: konv. total power requirement: 4.0 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge Infinitely variable adjustment range Adjustment from the rear - via handwheel Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3200 kN, 70 mm

NEGRI BOSSI V320/2000 - 320T Year: 2000 Working Hours: 85,000 h Screw diameter: 70mm Injection capacity per cycle: 1035g Opening stroke: 630mm Mold thickness (min x max): 250mm x 700mm Distance between tie bars (H x V): 630mm x 570mm Ejector stroke: 225mm 1 hydraulic core pull 1 air valve

Cylindrical grinder FRIEDRICH SCHMALTZ R4/2000.

Kompaktanlage zur Herstellung v. Stempeln, Eindruckklischees und Photopolymerdruckplatten. Compact system for the production of stamps, imprint clichés, and photopolymer printing plates. Es können sowohl Flüssigphotopolymer (Resin) als auch Photopolymer-Plattenmaterial verarbeitet werden. Both liquid photopolymer (resin) and photopolymer plate material can be processed. Belichter Klischeeherstellung / Photopolymer Platemaking AZ System 2000 Serial-No. 277 Plattenformat / Plate Size max. 23 x 33cm Mit 9 Arbeitsprogrammen Maschinendaten: Maße / Size Breite / Width 52cm, Tiefe / Deep 47cm, Höhe / High 95cm Gewicht / Weight ca. 62kg Elektrischer Anschluss / Eletric supply 220Volt, 1,3 kW

Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Sheet control Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt

EXTRACTION SYSTEM HUNKELER HKU 2000 (Compact Extraction Unit)

SIMMECH SIMMFORM 2000 duct beader was built in 2009 in Poland by SIMMECH s.c. The machine is used is designed to shape reinforcing beads over entire sheet metal length. This type of machining increases the stiffness of the material and its resistance to deformation while maintaining a relatively low weight. The finished sheet metal can then be used for the production of profiled sheet metal components or subjected to further machining, including plasma cutting. The SIMMECH SIMMFORM 2000 is designed for machining sheet metal with a thickness ranging from 0,55 to 1,2 mm and a maximum width of 2050 mm. The beading process is performed by gradually forming the moving material using rollers. The maximum working speed is 11 m/min, and the drive is provided by a high-performance R57SKH90L4 geared motor with a power of 1,5 kW. The machine is operated manually, with the possibility of setting  ...

CNC Turning and Milling Center DMG CTX GAMMA 2000 TC (spindle hours may increase slightly). The machine is equipped with an automatic steady rest from SMW AUTOBLOK, a three-jaw chuck (manufacturer SMW, diameter: 300 mm), additional clamping jaws, another jaw chuck, as well as a chip conveyor and coolant system. Transport warning: Caution: the machine can be transported on a truck up to 3000 mm wide. Additional technical specifications: • Spindle distance: 2260 mm • max. workpiece weight chuck parts/chuck weight: 250/150 kg • max. workpiece center of gravity from spindle flange: 250 mm • Travel path Z2: 1910 mm • Travel path Z3: 1910 mm • Steady rest clamping range DW: 45 - 310 mm • Steady rest width C: 145 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm

x-travel: 2000 mm y-travel: 1250 mm z-travel: 1108 mm turning speeds: 60 - 4000 U/min spindle motor: 38 / 24 kW tool taper: SK 50 tool change unit: 40 Pos. table surface area: 1600 x 1250 mm table load: 7 t c-axis: +/- 120 ° B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,5 x 4 x 2,9 m 5-axis machining center with - CNC control Heidenhain iTNC 530 - NC rotary table with B-axis - Automatic swivel milling head (C-Axis) - 40-fold tool changer (SK 50) - Electronic handwheel - 2 Chip conveyor - Coolant device 30 l/min - Coolant through Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS III greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm  ...

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

grinding length:1370 mm grinding width:560 mm workpiece height:800 mm total power requirement:50 kW dimensions of the machine ca.:9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m

material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

Langhi Butter Churn – 2000 Litres, Experience the ultimate in dairy processing with the Langhi Butter Churn, designed for large-scale operations. With a robust capacity of 2000 litres, this high-efficiency churn is perfect for dairy manufacturers looking to produce large quantities of high-quality butter., Features:, - High Capacity: Efficiently process up to 2000 litres of cream, meeting the demands of commercial dairy production., - Quality Construction: Built with durable, high-grade materials to ensure longevity and withstand rigorous daily use., - User-Friendly Design:Equipped with an intuitive control panel for easy operation and precise monitoring of the churning process., - Energy Efficient: Designed to optimize energy consumption without compromising on performance, helping you save on operational costs., - Easy to Clean: Features a hygienic design with smooth surfaces, making ...

Manufacturer :/ SDMO Power : 1130KW /1400KVA Engine: MTU 4000 V12Cylinder Turbo Diesel Operating hours:1175h RPM : 1500 U/Min. Frequency : 50 Hz Year of Make:2004 Auction-ID: A1-50111-1

Condition: Like new ! Brand: SDMO Model : X910FTD Power : 827KW-910KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Hours: 319h Engine: MTU V16Cylinder Turbo Diesel 16V2000G23 Year of Make: 2005 Generator: Generator: LEROY SOMER Auction-ID: A1-50111-3

MTU 12V396 SE TE94 INTERCOOLER NATO STOCK KODE 2930-12-A07-0048 ORIGINAL PART NUMBER 0030982820 DIDAR MAKINA PART NUMBER 2605710002

Rated Voltage: 230V/50Hz-2.5A Auction-ID: A1-49964-14

SAMSYS - Multisam MUS 2000 Offer details Stock number 1039-9480 Machine Type: Bar Feeder Manufacturer: SAMSYS Type Multisam MUS 2000 Year of construction 2000 Country of origin Switzerland Additional information Bar loading magazine SAMSYS - Multisam MUS 2000 - NOT TESTED - as a spare parts donor Technical details Bar diameter 5 - 80 mm Bar lengths 250 - 1,550 mm Bar length -max. 1,550 mm Longitudinal movement 600 mm Height adjustment 775 - 1,175 mm Dimensions approx. 2.25 x 1.10 x 1.80 m Machine weight approx. 0.5 t Auction-ID: A7-49608-26

approximately 2000 Allen bolts and 2000 stainless steel body rings Auction-ID: A1-46374-10001

HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Adjustable maximum slide force Ton 200 to 2.000 No. 04 Cylinders Net slide return force Ton 130 Maximum workpiece dimensions mm 5.000 x 2.800 x 1.700 Max. workpiece weight kg 60.000 Upper part weight Kg 35.000 Slide stroke mm 1.500 Maximum daylight between work tables mm 2.500 Minimum daylight between work tables mm 1.000 Frontal distance between uprights mm 5.100 Lateral distance between uprights mm 2.000 Front Moving Bolster: Frontal mm 5.000 Lateral mm 2.800 Table height above zero level mm 650 External stroke mm 4.000 Capacity Ton 60 Slide Table: Dimensions mm 5.000 x 2.800 Number of guides n° 8 Guide height mm 1.800 Lower blankholder cushion (6 cylinders, force 600–6.000 kN) Upper slide cushion (force 300–3.000 kN) Candle diameter (40 mm) and pitch (150x150 / 200x200 mm) Working Speeds: Minimum mm/s 3 Maximum mm/s 110 Approach mm/sec 4 ...

Stereo zoom microscope from Zeiss on tripod stand with footplate. The device is equipped with a binocular observation head and has a photo tube and a fiber optic connector. It is suitable for quality control, electronics manufacturing, precision mechanics, biology and other areas where three-dimensional magnified observation is required. The microscope is used and shows normal signs of use due to use. The optics and mechanics are in usable condition. Scope of delivery: 1 Zeiss Stemi 2000-C stereo microscope 1 tripod stand with metal base plate 2 eyepieces W 10x/21 (45 50 42) 1 photo tube 1 fiber optic fiber holder Type: Stemi 2000-C Designation: JMO2 N2 E51 Observation head: binocular Eyepieces: W 10x/21, No. 45 50 42 (pair) Accessories: Photo tube, fiber optic fiber ― Length: approx. 75 cm Width: approx. 17 cm Height: approx. 40 cm Weight: approx. 5 kg Auction-ID: A7-4981 ...

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

The AutoDoor AD200 is a powerful, electrically operated door opener for CNC machines with a stroke of 2000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD200 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Fan, fan, electric motor blower -Fan electric motor: 2000 W -Speed: 2850 rpm -Voltage: 380 V -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: Ø 160/325 mm -Weight: 17.2 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 300-2000 rpm -Motor: adjustable -Number: 1 piece of motors available -Price: per piece -Drive shaft: Ø 16 mm gear -Dimensions: 420/213/H205 mm -Weight: 22 kg