mtu 16 v used for sale

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

x-travel: 900 mm y-travel: 300 mm z-travel: 1000 mm control: Siemens Sinumerik 840D max. workpiece diameter: 1600 mm max. module: 20 mm tip circle diameter: 350 mm Milling arbour diameter: 375 mm Total closing value: 80 kVa weight of the machine ca.: 33,5 t dimensions of the machine ca.: 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive K ...

Gems 164870 LS-7 Type 9 Level Switch, NO/NC, 300PSI, 1/2"NPT, 120-240VAC

turning length: 1000 mm turning diameter: 350 mm turning dia. in gap: 450 mm spindle bore: 40,0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: 55029 D 1-4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 529 kg. range L-W-H: 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed steady rest - passage diameter max. 60 mm - Follow-on steady rest - passage diameter max. 60 mm - Clamping plate 250 mm - Quadruple tool holder - Shaft fixing device - Protection device for tool holder - Slip clutch - Micrometer longitudinal stop - Coolant device - Extendable chip tray - Frequency converter - Foot pedal with brake function according to CE - Splash guard - Thread gauge - LED machine light - Digital speed dis ...

bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...

table length: 1200 mm table width: 800 mm weight: 153 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1200 mm column arm: 200 mm ram stroke speed: 60.0 mm/sec return speed: 80. mm/sec work speed: 60.0 mm/sec work stroke: 100 mm table height: 760 mm table width: 150 mm oil volume: 130 ltr. voltage: 400 Volt Control: ESA E21 total power requirement: 4.0 kW weight: 3030 kg range L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double  ...

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/sec return speed: 80.0 mm/sec work stroke: 160 mm dayligth: 395 mm table height: 900 mm back stop - adjustable: max. 800 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 7524 kg range L-W-H: 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation Radius programming Graphic tool and product library Collision mo ...

pressure: 160 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/min return speed: 80.0 mm/sec work stroke: 160 mm dayligth: 395 mm table height: 900 mm oil volume: 200 ltr. voltage: 400 Volt weight: 8514 kg range L-W-H: 4910 x 1900 x 2550 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 400 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/min return speed: 165 mm/sec work stroke: ca. 350 mm dayligth: ca. 660 mm oil volume: 450 ltr. table height: 830 / 950 mm table width: 75.0 / 60.0 mm voltage: 400 Volt total power requirement: 18.5 kW weight: 13440 kg range L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control DNC 880 S swiveling control p ...

Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.

Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): 60 mm arm length: 1600 mm workpiece height max.: ca. 1300 mm borehole diameter: in Stahl 80 mm borehole diameter: in Guss 100 mm threading in St 60: M55 mm spindle turning speed range: 29-1.450 U/min Spindle Speed: 12 Stück boring spindle: 100 mm morse taper: MK5 spindle stroke: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4.600 kg dimensions of the machine ca.: 2600x1100x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot ABB Robotics IRB 1600 8/1.45 IRC5 M2004 , complete Control: IRC5 M2004 Number of axes: 6 Max. load capacity: 8 kg Max. working range: 1450 mm Year of Make: 2008 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Forwarding costs on request or pick-up on site.

1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).

x-travel: 1600 mm y-travel: 4000 mm z-travel: 1200 mm workpiece weight: 3500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- C-Frame construction - Die height 850 mm - Thickness bolster plate 100 mm - Throath C Side 360 mm -  

- incl. Boldrini MSF 45 Manipulator - Automatic positioning moulds in press - Roller are hydraulic driven - Roller arm adjustable in height    - Piston diameter ... - Fully hydraulic press with stroke.. -  

- 6 matching pieces identical available - No scratches mint condition - T size T 22 and 175 Jump from T to T  - Grey casted angles plates - Loading capacity 10.000 Kg

Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.

Radial drilling machine BR 56 x 1600 Year of construction: approx. 1965 (estimate) equipped with coolant device and drilling table as optional accessories

Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -

Ref. no.: 18591 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Sterisart Universal Pump for Sterility Testing Manufacturer: Sartorius Type 16420 SN - 61070345 The Sterisart universal pump version 16420 consists of Pump housing with pump head, lever, bracket and handles. The selector head sits in the front right. On the left side of the pump is the tripod with bottle holder and holding arm. The control unit includes: Display display, 2 soft keys, 1 Esc key, window for barcode scanner, connection cable with Plug to pump

Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

Key data: 16000 , 10131 , 150

Presse à injecter HAITIAN 1600 T Type : MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

BAR : 1500 l/min : 52 KW: 160

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

screw ø:: 30 mm screw length:: 16D screw speedl:: -- U/min Condition: used, Specification: Extruder - used - screw diameter: 30 mm - screw length: L = 16 D - with feed roller - Extruder water tempered, - Cylinder and head one tempering zone - Feed section can be cooled or heated - Flow rate adjustable - Screw compression approx.: 1:1.2 - Spraying head for hoses and profiles - Various injection moulds are available - Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate - Mass pressure measurement and display available - Operating and display elements are installed in the switch cabinet - Mobile version  ...

I buy a compact excavator built in 2013 in very good condition. Specifications Engine: Kubota V2607, 4 cylinders, 36 kW (diesel) Machine weight: 5,615 kg Equipment & Condition: Starts immediately, drives and all functions work flawlessly Rubber tracks in good condition Shield / Loading bucket with quick coupler 1 spoon included Air conditioning available, but currently without belts New battery installed Transportation can be organized More photos are available on request – viewing is highly recommended. Price is net (excluding VAT). Nameplate and serial number will be gladly communicated if you are seriously interested.

Technical data: Maximum print width: 165 mm Web width: min. 80 mm, max. 181 mm Print length: min. 82.55 mm, max. 457.2 mm Components of the machine: • Corona treatment • Delam-/Relam unit • 3x Letterpress units • 1x Hot foil stamping unit • 3x Letterpress units • Turning cross • Flat die cutter • Lamination unit • Rotary die cutter / Gap-Master with magnetic die cylinder: Z96, Z100, Z102, Z104, Z108, Z112, Z120 • Printing cylinders: 6x Z88, 5x Z90, 6x Z96, 1x Z98, 6x Z100, 6x Z104, 6x Z106, 6x Z108, 6x Z112, 6x Z114, 6x Z120, 6x Z132, 6x Z138

Key data: 7370 KW, 9213 kVA, 11 V

Five (5) Surplus/Never use/Never Installed, Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2009. The sale of these units include: Barring Gear, Air Intake System, Fresh Cooling Water System, Exhaust System, Diesel Oil System, Lubrication System, Air Starting System, Control Systems and more The generator is a GE Synchronous Generator, 9213 kVA, 7370 kW, 10 Poles, 720 RPM, 11,000v. 60 Hz. 0.8 P.F. IP54 IC81W. This unit comes with IMO Tier II certification and ABS certifications for the Heat Exchangers, Flexible Couplings, Diesel Engine and Generator. The shelf life of these units is over the five-year limit given by Caterpillar. Therefore, these units no longer have the Caterpillar Warranty. Unit is now ready for shipment.

approx. 10 pieces spring floor trolley, Zarges, 195 L – used - : Price per unit: 495.-€ (net), ex location! Minimum order 5 pieces! Manufacturer: Zarges Type: 40645, Suspension Floor Trolley W 161 Year of manufacture: unknown With push bar Item no. Inner Length (approx. mm) Inner width (approx. mm) Inner height (approx. mm) Outer Length (approx. mm) Outer width (approx. mm) Outer height (approx. mm) Set for payload (kg) Volume (liters) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21,0 equipped with 4 swivel castors in corner arrangement. Original price: approx. 1.500.-€ Condition: good Available: immediately Location: Attenweiler

pressure: 160 t stroke: / mm stroke: / mm table-size: / mm total power requirement: 18,5 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer Diosna SP 160 F Diosna Model: SP 160 F Dough machine with 2 courses, LED 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover Program control with rewind button Robust technology Machine mobile Connection 400V, 32A-CEE plug Machine We have more spiral mixers in stock!

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS & FREUDENBERG Description: Dewatering Screening Machine Type: "Roberg" 1600/5000/1 Available devices: 2 pcs identical Year of manufacture: unknown (90s) Screen length: 5,000 mm Screen width: 1,600 mm Number of screen decks: 1 pc. SPECIFIC COMMENT - No cracks, no deformations - Incl. outlet tray, drive and springs

Grinder for mincing meat Manufacturer: Sind Voltage: 380 / 50Hz Power: 15kW Size: 1550x900x1300mm Weight: 493kg

workpiece height max.: 645-1240 mm bore capacity in steel (diameter): 50 mm arm length: 350-1590 mm Total weight, approx.: 3500 kg turning speeds: 25-2000 U/min spindle taper: MK5 threading: M42 quill stroke: 320 mm total power requirement: 4 kW range L-W-H: 2450x980x2840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning dia. in gap: 400 mm turning length: 600 mm centre distance: 750 mm spindle turning speed range: 20 - 1000 U/min spindle bore: 25 mm 3-jaw chuck: Röhm, Ø 200 mm dimensions of the machine ca.: 2000 x 800 x 1500 mm weight of the machine ca.: 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

very good condition,

Case Puma 160 4WD tractor, Technical specifications:, - Year of construction: 2014, - Operating hours: 9150h, Engine & Performance:, - Engine: 6-cylinder, 6.7l turbo diesel, - Engine power: 160 hp (119 kW), - Max. power: 203 hp (151 kW)

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

A Fidia CNC vertical machining center is available. 1) Travel X/Y/Z: 1000mm/600mm/500mm, speed: 20000rpm, spindle-to-table distance: 630mm, spindle-to-base distance: 190mm. Machine dimensions X/Y/Z: approx. 2800mm/2700mm/2700mm, weight: approx. 5400kg, control: Fidia M30, operating hours: 44415h, spindle hours: approx. 2000h. The second spindle is new. Without internal coolant supply and 4th axis. Documentation available. On-site inspection possible.