british flag
Resale Logo

mps used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information size reduction technology  NEUE HERBOLD Maschinen-u. Anlagenbau GmbH  http://www.neue-herbold.com 
banner logo
start page > keywords mps > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121722774 802

MAN ROLAND R 202 TOB for sale


Format 52 x 74cm / RCI (remote inking control) / Rolandmatic dampening system / Suction feed board / Mabeg Feeder / Edelman refrigeration and circulation / Quick action plate clamps / Chromed cylinders / Weko T6 powder s ...
used machine
 
Format 52 x 74cm / RCI (remote inking control) / Rolandmatic dampening system / Suction feed board / Mabeg Feeder / Edelman refrigeration and circulation / Quick action plate clamps / Chromed cylinders / Weko T6 powder spray / only 2 506 078 impressions!
The machine is only used as an demo machine in an printing school, extremely good condition
Available: December 2017
1994
Price  
  BE   request
121722769 834

MÜLLER MARTINI 1530 Panda binder for sale
Binding machines


Muller Martini Panda perfect-binding complete line, consisting of: - 201gatherer 12 stations + 1 manual - 1530 Panda binder 9 clamps - max. block size 368x268 mm - speed 900 to 3.600 books/h. - max./min. cover size  ...
used machine
 
Muller Martini Panda perfect-binding complete line, consisting of:
- 201gatherer 12 stations + 1 manual
- 1530 Panda binder 9 clamps
- max. block size 368x268 mm
- speed 900 to 3.600 books/h.
- max./min. cover size 240 / 578 mm
- block thickness 3 to 40 mm
- cover feeder
- Milling & Roughening station
- Hotmelt spine + side gluing
- Pressing unit
- Belt delivery
- DS240 Three knives trimmer
- Stacker
1992
27,500 €  
  RO   request
121704318 834

MULLER MARTINI PONY 246 Muller Martini Baby Pony for sale


we have for sale Muller Martini Baby Pony 1987 year Max.size 400x270 mm Min.size 120x95 mm Max.Binding thickness 40 mm Max. speed 1500 books/h. 5 clamps, Hot melt main gluer Cover feeder, dust exhauster  ...
used machine
 
we have for sale
Muller Martini Baby Pony
1987 year
Max.size 400x270 mm
Min.size 120x95 mm
Max.Binding thickness 40 mm
Max. speed 1500 books/h.
5 clamps,
Hot melt main gluer
Cover feeder,
dust exhauster
milling device
Available immediately?
Good condition.
1987
Price  
  PL   request
121686990 2000

VARIOUS Various for sale
Warehouse for bathroom and hydraulic fixtures


Plumbing components warehouse Equipment, merchandise and stock including: -check valves, fittings, faucets, iron pipe fittings, valves, sleeves, Caps, locknuts, galvanized Barrels, screws, adapters, Couplings, clamps,  ...

 
Plumbing components warehouse
Equipment, merchandise and stock including:
-check valves, fittings, faucets, iron pipe fittings, valves, sleeves, Caps, locknuts, galvanized Barrels, screws, adapters, Couplings, clamps, extension cords
-Form MTR CF, YOU reduced zinc plated, cylinder valves, radiators, pumps Dab
Available detailed catalog of all inventory
Expressions of interest to be deposited before the 12 December 12:00
For more information and details please contact us at 0307751645
 
135,000 €  
  IT   request
121686987 205

SCM ACCORD 40 for sale
Numerically Controlled Machining Centres


Working centre SCM model ACCORD 40: General details: - useful working area 4250 x 2280mm - panel passage 330mm - automatic centralized lubrication - optimized and centralized dust extraction system - control with P ...
used machine
 
Working centre SCM model ACCORD 40:
General details:
- useful working area 4250 x 2280mm
- panel passage 330mm
- automatic centralized lubrication
- optimized and centralized dust extraction system
- control with PC OFFICE, with program XILOG PLUS
- CE norms , with frontal carpets and side protection nets
Working plane:
- multi-functional aluminium plane
- 2 vacuum pumps 250 mc/h (5,5 kw each)
- 3 side reference strokes
- possibility of "alternate/pendulum working"
- laser projector on the plane
Operating groups:
- working unit PRISMA at 5 axis, HP 15 at liquid cooling, attack HSK63 ,
served by tools changer at 12 positions on the machine (RAPID 12)
- boring unit F18 with:
12 vertical and 6 horizontal chucks
integrated blade unit
2010
Price  
  IT   request
121669360 206

KALLESOE A/S K 20 / E for sale
Carcass clamps


Automatic corpus press KALLESOE A / S type K20 / E year 1998 Engine No. No. 33938 / 98 This special designed body press K20E is made for the production of cabinets. The special body press spans together a whole ward ...
used machine
 
Automatic corpus press KALLESOE A / S type K20 / E year 1998
Engine No. No. 33938 / 98

This special designed body press K20E is made for the production of cabinets.
The special body press spans together a whole wardrobe in a single operation, including shelves, sides and rear paneling.
The parts of the Cabinet are held by fixtures and vacuum heads before the Cabinet is compressed.
The range is set 4 ball screws which compress even the Cabinet.
A servo motor ensures that each clamping clamping pressure is equal.
The machine is controlled via a touch panel: the corpus press is set automatically on the basis of entered dimensions and values on the correct measure and the correct clamping pressure.
The here shown special body press is ready for shipment
the finished cabinets equipped with an underlying belt railway with roles.

Technical data
Clamping width min./max.: 190/1200 mm
Clamping height Min/Max: 200/1200 mm
Clamping depth min./max.: 200/400 mm
Working height: 500/1000 mm

Specifications subject to

Automatic case press KALLESOE A / S type K20 / E year of manufacture 1998
Machine no. No. 33938 / 98

This specialized case press K20E is designed for the production of cabinets.
The special corpus press clamps on entire cabinet together in a single operation, including shelves, sides and rear panelling.
The parts of the cabinet are held in place by holding devices and vacuum heads, before the cabinet is compressed.
The edge width is adjusted via 4 ball screws, that so compress the cabinet.
A servo motor ensures that the edge pressure is the same for every clamping operation.
The machine is controlled via a touch panel: the body press is automatically switched on and off by means of a touch panel.
of the entered dimension and values are set to the correct dimension and clamping pressure.
The case press special shown here is designed for further transport.
of the finished cabinets are equipped with a belt conveyor with rollers behind it.

Technical specifications
Clamping width min. / max.: 190/1200 mm
Clamping height min. / max.: 200/1200 mm
Clamping depth min. / max.: 200/400 mm
Working height: 500/1000 mm

Technical data subject to change
1998
Price  
    request
121669354 102

EMCO E65 for sale
CNC Turning Machines


CNC - lathe EmcoTurn E65 Control Siemens 810 d powerline with shop turn Technical data: Max swing over cross slide 360 mm maximum turning diameter mm 310 maximum part length 520 mm Hy3y0mgf Max bar passage  ...
used machine
 
CNC - lathe EmcoTurn E65
Control Siemens 810 d powerline with shop turn

Technical data:
Max swing over cross slide 360 mm
maximum turning diameter mm 310
maximum part length 520 mm
Hy3y0mgf
Max bar passage 65 mm
Travel X / Z - axis mm 210 / 610

max speed main spindle 4,200 min-1
maximum main spindle 18 kW

Sauter revolver
Number of sites: 12
VDI 30 tool clamps

Accessories:
Power Collet Chuck E185
Partial catch up
12 tool holders
EMCO top load 10-65

Machine can be visited until KW48 in the production.
2007
Price  
    request
121669344 802

RYOBI 522 HX for sale


-Two colours max paper size 37x52 cms. straight machine -Year 1997, Only 15 mil. impressions -Ryobimatic dampening, Quick clamps -AAC Automatic Aqua Control with cooling unit, Automatic registers -Plate punch, all ac ...
used machine
 
-Two colours max paper size 37x52 cms. straight machine
-Year 1997, Only 15 mil. impressions
-Ryobimatic dampening, Quick clamps
-AAC Automatic Aqua Control with cooling unit, Automatic registers
-Plate punch, all accessories, in production now
1997
12,000 €  
  IT   request
121632751 1102

MTU(DAIMLER CHRYSLER) 4000 L61 for sale
Gas engines


MTU ENGINE 4000 L61 GAS OUTPUT: 1164 kW YEAR OF MANUFACTURING: 2005 HOURS: 45,326 GENERATOR: STAMFORD OUTPUT: 1550 KVA - 400V AC SCOPE OF SUPPLY The following are integral parts of generators and groups needed for  ...

 
MTU ENGINE 4000 L61 GAS
OUTPUT: 1164 kW YEAR OF MANUFACTURING: 2005
HOURS: 45,326
GENERATOR: STAMFORD
OUTPUT: 1550 KVA - 400V AC
SCOPE OF SUPPLY
The following are integral parts of generators and groups needed for its implementation (gas inlet, outlet energy):
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Starting System
•Control Panels generator
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer
•Coolers
•Cooling system
 
Price  
  ES   request
121632737 203

WEINIG HYDROMAT H23C for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of manufacture 2001 TECHNICAL PARAMETERS: PLANER: -planing width 230 mm -planing height 180 mm -spindle diameter 50 mm -the maxim ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture 2001

TECHNICAL PARAMETERS:

PLANER:
-planing width 230 mm
-planing height 180 mm
-spindle diameter 50 mm

-the maximum diameter 220 mm

-the feed rate to 80 m/min
-adjustable feed on the inverter

1) head the lower 15 kW
2) head right 11 kW
3) head left 11 kW
4) upper head 11 kW
5) upper head 18 kW
4) lower head 22 kW

-electrically height-adjustable
-electrically adjustable upper heads
-pneumatic clamps

-cardan shafts feed
-five top steel roller
-the two upper rollers, rubber
-four rolls in the worktop extending

-auxiliary pressure on the left of the head
-the last two heads on podtrzymkach
-nozzle diameter 140 mm

SYSTEM ADMINISTRATION:
-packet length 6100 mm
-width: 1200 mm
-height 1300 mm
-the possibility of stacking two packages at the same time
-for
-the brackets to the narrow items
-chain feeder 2500 mm
-initial material segregation
-Cross-feeder Planer 1500 mm
-hydraulic Accelerator

SYSTEM:
-conveyor 7000 mm
-the receiving table transverse conveyor 2100 mm
-receiving rollers-powered 6000 mm
-receiving roller and adjustable flame launchers, 7100 mm
-gravity rollers receivers

Automatic line strugaj?ca Weinig is a system for improving productivity, while increasing its efficiency. Solutions of this type are directed to the companies that make the process of automation of production facilities. Planing process elements is operated by two persons who are responsible for the initial choice of material and the reception. The principle of operation of the line shall be as follows, the material is delivered with a forklift on the chain conveyor, which thanks to its long sleeps two packages at the same time. This affects directly the effectiveness as it unfolded one of the operator can immediately place again at the right place, without downtime caused by not delivering material by fork-lift truck. Rozsztalowania system tilts the entire package and raises it at the same time, releasing the single guides layers that directly hit the chain feeder. The individual elements at this stage pass prequalification for those suitable for planing and waste. Material not suitable for further processing is separated by an operator who has a position at this stage, who, through the button adjusts the rollers stop line continuity by what material falls under the tray and does not goes to the Planer. Material that has passed segregation and is suitable for further stage goes through gravity rollers for another chain feeder. At the end of the feeder is equipped with a system of rollers and hydraulic Accelerator, which is responsible for moving items from the tray to the Planer Weinig Hydromat H23C. Planing process then takes place elements that has the possibility of processing them at speeds up to 80 m/min. Integrated system of elements after the planing them tape feeder table transverse equipped with automatic system dump the material. At this stage, ready to cross conveyors transporting it over the core. Material when you hit the Skate moved
is them to ejectors which expel material on gravity rollers where they are received by the employee. The line is the ideal solution for companies who appreciate the quality and the efficiency of the elements. Planer is able to meet even the most demanding expectations, while the system input and output only to increase its performance.
 
Price  
  PL   request
121632733 708

MTA AS for sale
Chillers


Cooling capacity: 265 kW Year of manufacture: 2008 Refrigerant circuit: 2 pieces Freon: R407C Compressors: 4 pcs. Danfoss (scroll) Number of fans: 4 pcs. Hydraulic module (water pumps 2pcs and buffer tank) Dimensi ...
used machine
 
Cooling capacity: 265 kW
Year of manufacture: 2008
Refrigerant circuit: 2 pieces
Freon: R407C
Compressors: 4 pcs. Danfoss (scroll)
Number of fans: 4 pcs.
Hydraulic module (water pumps 2pcs and buffer tank)
Dimensions: 4,55 x 2,3 x 2,2 m
Weight: 2500 kg

Need to change the evaprator (there is a spare one)
2008
Price  
  PL   request
121632614 706

TRANS-TECH HYSEK BMH Feed Gear, 120.000 cph for sale
Ionized Air Can Rinser Trans-Tech Hysek


Ionized Air Can Rinser Trans-Tech Hysek 120 000 cph This German built Trans-Tech CAN Rinser with 2x BMH Empty Can inverters was built and installed in 2011. It is in excellent conditions. It comes with a 180 degree c ...
used machine
 
Ionized Air Can Rinser Trans-Tech Hysek 120 000 cph

This German built Trans-Tech CAN Rinser with 2x BMH Empty Can inverters was built and installed in 2011. It is in excellent conditions. It comes with a 180 degree can twister on the top part, the ionized air rinser (with pumps and treatment) and a 180 degree upright twister on the bottom of the rinser. The platform and supports are included. The equipment is installed and in use, and can be inspected in operation.

Make: Trans-Tech Hysek and BMH Feed Gear
Manufacturing year 2011
Capacity: up to 2.000 can per minute (120 000 cph)
Running hours: less than 8.000 hrs
Container handling: 8oz – 66mm diameter / 87mm height
350ml – 66 mm diameter / 122 mm height
473ml – 66 mm diameter / 157 mm height
10.5oz – 57 mm diameter / 138 mm heigth
Electricity: 460 V / 60 Hz
2011
Price  
  FI   request
121632608 401

OZ TO 2 LITER PET up to 5.500 bph for sale
Complete PET Bottle Filling Line 5.500 bph


Complete PET Bottle Filling Line 5.500 bph This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bot ...
used machine
 
Complete PET Bottle Filling Line 5.500 bph

This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bottles cap PCO 28 mm. Frequent maintenance is still taking place (greasing and startup / test runs). It is completely installed and in excellent condition. Dry end of the line is being used for repacking purpose. Line has run 3 different bottle formats (biggest 2.0 liters). Spare parts (limited) are available, all documentation is available. The line is in good condition, installed and powered and can be tested.

Make: Various, see details
Built: 2006/2007 – Installed 2007
Capacity: Up to 5.500 BPH
Container handling: PET, 8 oz to 2.0 liters
Condition: Good
Running hours: 16500 hrs
Power / voltage: 460 V / 60 Hz

Equipment included:

- Bohm Pressure vessel – 900 liters – Type 2360
- Aquafine UV Desinfection unit
- Kaeser Air dryer + 40 bar air compressor – THP212 + CSDX 137, 3580 l/min, 75.0 kW
- Barter CO2 Filter – EBCO 1500
- Ingersoll Rand – 7Bar compressor
- 2x LMI Dosing pumps and meters
- Evapco Cooling tower – PMC-220E
- Membrafe Amoniak Membrame Cooling – RL500-3
- 2x Vilter Amoniak compressors – ZL46
- 1x Pentair Water filter
- Pumps & Filters (Various)
- Kosme preform hopper
- Kosme preform elevating conveyor PFA 1500, 0.37 kW, 50 Hz
- Kosme preform alignment infeed conveyor
- Kosme KSB 4L – Linear blow moulder – 4 heads, 68 kW, 50 Hz
- MTA Chiller for Kosme blow moulder, 6 bar, 11.6 kW, 220 V / 60 Hz
- Mesal Air conveyors, linear curves, 9 motors
- Mesal manual outfeed airconveyor to labeler (height adjustment)
- Trine wrap around labeler + Glue pump
- Mesal manual airconveyor infeed from labeler (height adjustment)
- Mesal mixer for CSD
- Amoniak cooler Mesal + Alfa Laval PHE (M10-BWFM, 10 bar, 34.89 L)
- Mesal rinser,filler,capper (Tribloc 30/30/10) – Manual infeed of caps
- Mesal bottle conveyors + SS conveyor belts
- Visial lightbox full bottle inspection (manual)
- Control panel for conveyors + filler Danfoss drives
- Vitz packers, mechanical wrap only packer for 12 packs + Heat tunnel, HT 74 DE
- Outfeed conveyor (manual palletizing)
- Optional = 2x SS sugar dissolving tanks
- Optional = 2x SS storage buffer tanks
2007
Price  
  FI   request
121632570 1200

LIMBURG - LATHAM 3.600 kg dry product / 24 h for sale
Dewatering Station with Membrane Filter Press


Dewatering Station with Membrane Filter Press for Kieselguhr Sludge This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is ...
used machine
 
Dewatering Station with Membrane Filter Press for Kieselguhr Sludge

This complete dewatering station was designed by Limburg for Kieselguhr waste dewatering in to semidry cakes for easy waste disposal. The process is suitable also for dewatering other type of sludges. Actual dewatering is made with Latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content Filter press is equipped with an automatic cloth washing system and an automatic cake discharge. Shaker bars for discharge and plate opening and closing functions are hydraulically operated (Limburg Cake Release Control System). Cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. Process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with Siemens Simatic S 7-400 PLC and Siemens OP 7 display. Equipment was delivered in year 2000 and it is still installed and in good operational condition.

Technical data:
Made by Limburg – Latham
Made in year 2000
Inlet sludge dry content 10 – 20%
Capacity max 3600 kg dry product / 24 hours
Cake dry content > 50% by weight
Filtrate dry solid content < 2 % by weight
Latham filter press Side bar membrane 630
Total filter area 6.9 m2
Total chamber volume 99.8 dm3
Plate size 630 mm
Working pressure 7 barg
Number of chambers 12 (expandable to 15)
Plate transport Automatic, multiple cake discharge
Membrane filtration pump 159 litres / min
Sludge tank 6 m3, AISI 316L
Sludge tank agitator 0.75 kW, 80 rpm, blade 660 mm
Sludge pump capacity 511 litres / min
Filtrate tank 1.5 m3, AISI 316L
2000
Price  
  FI   request
121614422 1403

Platform ladder


Platform ladder, platform ladder - 1,200 x 1,360 x 4,650 mm (Hxwxd) - used - 2 x 6 levels - pedestal stairs - Zacher Here you get a platform ladder which consists of two combinable platform ladders. Please note that t ...
used machine
 
Platform ladder, platform ladder - 1,200 x 1,360 x 4,650 mm (Hxwxd) - used - 2 x 6 levels - pedestal stairs - Zacher

Here you get a platform ladder which consists of two combinable platform ladders. Please note that the connector is intact, must however be fixed. The platform is a total 1,200 x 2,010 mm in size and has a 30 mm thick printing plate as floor. The delivery takes place without railing.

Due to the resistant materials used, the industry leader is extremely durable and suitable for the daily indoor as well as outdoor use.

The podium ladder comes from a range which was used in the manufacture of rolling stock in Krefeld, Germany.

Properties:
-Dimensions approx.: 1,200 x 1,360 x 4,650 mm (Hxwxd)
-Consisting of 2 platform ladders
-Using clamps to connect with each other (see photo)
-Connector must be secured new
-Material: Aluminium
-Strong square tube beams
-Platform: 1200 x 2.010 mm (Wxd)
-Floor: 30 mm screen printing plate
-Double-sided walkable
-M4 aluminum levels, R9
-Tread width: 900 mm
-8 swivel castors with Stoppers
-Approximate weight: 234 kg
-Regularly tested

Execution:
-The number of stages: 2 x 6 PCs.
-Height approx.: 1200 mm
-Climbing angle: 45 degrees
-With impact protection (single-sided)

From a platform height 1.00 m, 637 dual handrails are required in accordance with BGI. If you require handrails or handrails, you can request this with us.

With the purchase of required accessories such as railings and handrails we can supply also a test badge also wish

Properties:

Number of stages: 2 x 6 pieces
Material: Aluminium platform angle: 45 degrees
Approximate weight: 234 kg

Dimensions:

Height: 1200 mm
Width approx.: 1.360 mm
Depth approx.: 4.650 mm

Podium:

Height approx.: 1200 mm
Width approx.: 1200 mm
Depth approx.: 2,010 mm

You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
 
473 €  
    request
121596390 201

WOOD-MIZER WOOD-MIZER for sale
Horizontal bandsaws


-In stock -After reviewing the technical -Year of manufacture 2004 TECHNICAL PARAMETERS: -The maximum diameter of the logs 900 mm -The maximum length of logs 6500 mm -Electric feed head: up, down, front, back  ...

 
-In stock
-After reviewing the technical
-Year of manufacture 2004

TECHNICAL PARAMETERS:

-The maximum diameter of the logs 900 mm
-The maximum length of logs 6500 mm
-Electric feed head: up, down, front, back

-Main engine 15 KW
-Wheel diameter 640 mm

-Vertical supports side-five pieces
-Five clamps
-Cutting attachment of slats

-Stationary desktop operator
-Cooling belt

OVERALL DIMENSIONS OF THE MACHINE:

-Length: 700 cm
-Width: 240 cm
-Height 245cm
 
Price  
  PL   request
121596385 201

BRODPOL TT5/600/400G for sale
Multi-blade saws


-machine in stock -After reviewing the technical -very good condition -year of manufacture: 2008 TECHNICAL PARAMETERS: -the maximum diameter of the element 400 mm -minimum diameter of element 120 mm -maximum l ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture: 2008

TECHNICAL PARAMETERS:

-the maximum diameter of the element 400 mm
-minimum diameter of element 120 mm
-maximum length of item 6000 mm
-the minimum length of item 150 mm

-circular saw diameter 600 mm
-dual spindle
-spindle diameter 2 x 60 mm
-spindle speed ~ 2220 RPM
-feed adjustable 8-25 m/min

-winch oflisów
-four top pneumatic clamps
– diameter 250 mm
– roller table output centering
-spiral rollers

-main engines 90 kW + 70 kW
-track feed engines 2 x 3 kW
– Motors winches oflisów 2 x 1.1 kW
-engine pressure top 1.1 kW
– Motor rollers 1 kW
-power supply 3 x 380 V

-intake air 14000 m3/h

Overall dimensions (after removing) length/width/height
1) 270 cm/80 cm/210 cm
2) 215 cm/200 cm/230 cm
3) 280 cm/130 cm/210 cm
4) 600 cm/105 cm/100 cm

total weight ~ 7000 kg

Purpose:

TRAK g?sienicowo-chain is intended for longitudinal sawing round wood. The logs are served to the roller conveyor sawmill-duty table (increasing), on which are the automatic centring. It will. Material from the conveyor belt, in a continuous manner, by the team is tracked for the saw. Next the team cutting logs are split (using the band saw on two parallel to each other, spindles) on one or two of the Prism plus two boards and oflisy. After the intersection, a table with a single, specially adapted chain receives an uncut portion of the body. System side rolls dociskaj?cych keeps oflisy, side boards and the stockpile (Prism) into one, coherent whole until rozchylenia reels-automatic separation of the prism from the rest of the boards and the oflisy up under the table that receives, for example, on the belt conveyor. This process ensures that modern sensor, you do not need to make any additional, complicated regulations, for example, when you change the diameter of the logs. TRAK set in technological line along with logs and conveyors are characterized by very high efficiency up to 30 m3 per 1 h.
 
Price  
  PL   request
121595106 815

DUPLO DocuCutter FKS Duplo DC 645 for sale


High-finisher for digital printing Final format min. 210 x 210 mm, 370 x 650 mm Capacity 100 mm Weight 110-350 g / m ² Cross-cutting, slitting, cut, Creasing and perforating All operations can be combin ...
used machine
 
High-finisher for digital printing
Final format min. 210 x 210 mm, 370 x 650 mm
Capacity 100 mm
Weight 110-350 g / m ²
Cross-cutting, slitting, cut,
Creasing and perforating
All operations can be combined and
in an arch
Barcode management and printing stamps reading
Different jobs from a batch process
2015
Price  
    request
121595046 107

FLOW Waterjet pro for sale
Water cutting machine


Operating hours: 700 h CNC Higermann + Flow Work table: 313x 1300 x1300 mm Material thickness: 250 mm High pressure pump VT pumps (3800/4150 and 4500 bar)
used machine
 
Operating hours: 700 h
CNC Higermann + Flow
Work table: 313x 1300 x1300 mm
Material thickness: 250 mm
High pressure pump VT pumps (3800/4150 and 4500 bar)
2007
Price  
    request
121595037 503

DOPPSTADT AK420 PROFI for sale


Wood waste grinder, Hammer, high speed Doppstadt AK420 profi -year of production 1999 -engine Mercedes-Benz 420KM -weight 18000kg -mileage 6143mth originally -hydraulic samonap?d-riding -rear conveyor to move crum ...
used machine
 
Wood waste grinder, Hammer, high speed
Doppstadt AK420 profi
-year of production 1999
-engine Mercedes-Benz 420KM
-weight 18000kg
-mileage 6143mth originally
-hydraulic samonap?d-riding
-rear conveyor to move crumbled material
-floating floor with a batch roller feeding
-The machine on: list the oils, filters,-the possibility of using different baskets blade
-for shredding trees, stumps, roots, compost, etc.
-perfect for the production of biomass
-built on the chassis of the trailer 2 axis
-machine introduced-not used in Poland

Very good condition-ready to go

contact: + 48600517834
1999
Price  
  PL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter