moulding machine used for sale

Closing force: 100 T Opening stroke: 500 mm Between columns: 420 x 420 mm Tray dimensions: 600 mm X 600 mm Mini/maxi mould: 250 mm Max gap between trays: 750 mm

Screw diameter: 35 mm Screw length: 20D cm3: 168 Bars: 2640 Between columns: 470 x 470 mm Tray dimensions: 670 mm Mini/maxi mould: 250 mm Max gap between trays: 580 mm Motor power: 22 kW Heating power: 11 kw

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm

Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Minimum mould: 300 mm Max gap between trays: 1300 mm Motor power: 45 kW Heating power: 25.9 kw

Type of control: NC 4 Closing force: 250 T Opening stroke: 675 mm Between columns: 630 x 630 mm Tray dimensions: 950 X 950 mm Mini/maxi mould: 330/710mm Max gap between trays: 1385 mm Screw diameter: 60mm Screw length: 20D

Closing force: 280 T Opening stroke: 675 mm Between columns: 630 X 630 mm Tray dimensions: 950 x 950 mm Mini/maxi mould: 330/710 mm Max gap between trays: 1385 mm Motor power: 26 kW Heating power: 23.1 kw Type of control: NC 4

Brand: Battenfeld Injection molding machine working Production until October 2021

3 BMB KW38 machines for sale 2 of them in good condition the other for parts

1993 model husky xl 300 pet injection engine (full revision) 1997 model Piovan raw material dryer 1999 model Fasti mold drier Robot and conveyor Some pet preform moulds ( New ) Full automatic, in excellent condition

Sandretto Series 350 Injection molding machine Ask for technical details.

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Netstal brand Clamping force [kN] 1000 - 2990 Year of production 2004 Injection weight [g] 200 - 499

The machine is fully equipped with equipment, i.e.: a plastic hauler and a plastic mill/cascade crusher. Year: 2015

Injection molding machine Brand Negri&Bossi Nb 40 400 h - 115 year 1996 pres.idr.max 150 power kw 11 -- hz 50 -- volts 380

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

This injection moulding machines was manufactured in 2001. The Ferromatic K-Tec 350 S/2F is known for its robust performance and reliability, suited ideally for a variety of injection moulding applications. If you’re considering enhancing your production capabilities, the Ferromatic K-Tec 350 S/2F machine we have for sale could be an excellent fit. Contact us for more information.

High-speed, high-precision thermoplastic automatic machine of a hybrid” type (electricity + hydraulics) with a feedback system. Installed in 2012, never used (new) PECULIARITIES: • The injection unit uses an AC servomotor to accurately dose the material. • Maximum injection speed – 700 mm/sec. • The machine of this series is ideal for high-precision casting of products for the electrical industry, as well as for high-speed casting of thin-walled products for the packaging sector.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. PECULIARITIES: • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Used STRATOS 10E blow molding machine for the production of PET packaging with a capacity of up to 10L. SMF STRATOS 10E is adapted to the Fi38 thread. Year of production 2016. Set includes: 1. AUTOMATIC PET BOTTLE BLOWING MACHINE STRATOS 10E with a set of molds for 1 format 2. Preform feeder 3. Bottle receiver 4. Power Wizard™ 5. Air recuperation system 6. DR-310 preform basket tipper PRODUCTION DATA • Number of sockets - 2 • Maximum package diameter - 220mm • Maximum packaging height 435mm • Packaging capacity 3.0÷10.0l ELECTRICAL SYSTEM • Voltage (standard) According to PN-EN 50160 • 400V ± 5% for fast voltage changes with an averaging time of 10 ms. • 400V ± 10% for slow voltage changes with an averaging time of 10 min. • Frequency 50 ÷ 60Hz • Connections: Three phases (3P) + Neutral (N) + Protective (PE) • Control voltage 24 V/DC • Ins ...

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] thirty Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20

Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 230 Injection pressure [bar] 2022 Dimensions and weight Net weight with control cabinet [t] 6.8 Dimensions (length x width x height) [m] 4.82 x 1.48 x 2.01 Closing unit Clamping force [kN] 1200 Dimensions of mounting plates (hxv) [mm] 740x680

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 750x750 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 412 Injection weight [g] 392 Injection pressure [bar] 1909 Dimensions and weight Net weight with control cabinet [t] 8.8 Dimensions (length x width x height) [m] 5,800 x 1,700 x 2,400

Closing unit Clamping force [kN] 2400 Dimensions of mounting plates (hxv) [mm] 907x910 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] 460-800 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 424 Injection pressure [bar] 1890 Electrical and hydraulic equipment Heater power [kW] 30.3 Dimensions and weight Net weight with control cabinet [t] 15.8 Dimensions (length x width x height) [m] 6.95 x 2.08 x 2.48

Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.

There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible.

Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.

Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.

Mould thickness: 100-440mm.

Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.

Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

Connected load: 17.71kW.

Connected load: 37kW.

Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.

Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.

There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.

Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.

Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.

Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.

Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.

Clamping force: 1600kN, stroke volume: 215cm³, injection pressure: 2020bar, power: 15kW, weight: 5.7t, including six Temperature Control Devices SINGLE and Dry Air Dryer PIOVAN.

Ejection stroke: 35mm, weight: 700kg.

Clamp force: 750kN, heating output: 11kW, weight: 3t.

Screw diameter: 100mm, clamping force: 13.000kN, tool installation height: 600-1550mm, weight: 69t, operational hours counter: 15,460h.

Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.

Clamping force: 800kN, weight: 4.3t.

Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20.