mould used for sale

KALMEIJER Pastry moulding rolls (standard A,B + C rolls)for KGM Christmas motifs used, good condition, different motifs: Spekulatius sorted German males Skat Nikolaus with fir tree (special roller)

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

Flat 4-sided blade (package, 10 pcs.) 12x12x1,5 Flat 2-sided blade (package, 10 pcs.) 20x12x1,5 Flat 2-sided blade (package, 10 pcs.) 30x12x1,5 Flat 2-sided blade (package, 8 pcs.) (used) 50x12x1,5

with spare screw, high-pressure hose and various spare parts - see pictures

motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible

MARTIN T92 automatic roll forming machine with CNC control and 6 frequency-controlled hobic axes Program memory, tool memory, collision protection, diagnostic function, etc. Brand: MARTIN Type: T92 Standardization: CE Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 260 mm (with pendulum axle preparation) Planer thickness: 5 - 180 mm Roll forming depth: max: 40 mm (with suitable tool) Min. product length: 380 mm Operation: CNC control with LCD user interface, for spindle positioning, feed, machining programs, tool data, diagnostics, etc. Storage option of up to 200 profiles and planer dimensions incl. the associated Tool information including all axes of the machine; Storage option for 200 tools incl. reference data; Integrated operating hours counter with total and batch running time;  ...

Engel injection moulding machine old

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm

Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...

Table dimensions mm: 1000 x 900 With drive system

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg

According to the PDF prospectus!

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

molds fo caps 1. for glass jars coffe - Caps for glass jars coffe 72 mm and 65 mm - 1500 Euro 2. Saint Gabin - few moulds 6 cav. - 3.000 Euro

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

Used blow moulding machine made by KRONES model Contiform S18. New 2004. It has 18 blow moulding stations. The maximum blow moulding speed is 24,000 bottles per hour for the 2.0 l format and 28,000 bottles per hour for the 1.5 l format. In February 2024, the machine was upgraded to support the PCO 2622 thread. The blow moulding machine has an integrated control system with visualisation in Polish, English and German. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic glycol cooler, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air transport conveyor.

Control CC 100 for ENGEL injection moulding machines

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

Used blow moulding machine made by SIPA model SFR24. New 2007. It has 24 blow stations. The maximum blow speed is 38,000 bottles per hour for the 1.75 l format and 41,000 bottles per hour for the 1.5 l, 1.25 l, 1.0 l and 0.7 l formats. The device has an air recovery system and linear optical control for testing the quality of preforms. Supported thread type: PCO 1881. The blow moulding machine has an integrated control system with visualisation in Polish, English and Italian. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic air-cooled chiller for supplying the machine with cooling water, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air conveyor.

- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request

Output (caps/min): 1500

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall  ...

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0339 Brand: WEINIG Model: PROFIMAT 23/E - CE Standard Automatic 5-spindle moulding machine for the production of frames, furniture parts, windows, doors, moldings, broom handles, wooden toys, and various - CE Standard Features: Heavy-duty base made of solid cast iron Chainless cardan feed: precise, robust, and durable Special feed roller teeth that reduce the depth of entry into the wood Compact feed system Pneumatic pressure on the feed rollers DIGISET WEINIG for left and upper spindles: tool adjustment is performed directly via dual digital displays Technical data: Min/max working width 20/230 mm Max working height mm 120 Feed speed variator 5–24 mt/min Shaft diameter mm 40 Shaft speed rpm 6000 Feed roller diameter 140 mm Pre-planing table length 2000 mm Soundproofing and full protective coating Motorized vertical feed adjustment Side roller pressur ...

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used, well-preserved set of barrel / screw

various blow molds available from stock. More information on request