mould used for sale

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

Box for cycle - 3 pcs. new moulds price 14.000 Euro

injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons

Used Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Condition: As Is Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Model: DYNABLOW DB 30 Speed: 3.000 Bph Number of cavities: 3 Type: Linear Compressor NOT included Chiller NOT included Safety protections Code: W 90 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Condition: As Is Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Speed: 16.000 bph Model: sbo 16/16 Number of cavities: 16 Preform tipper Preform orienter Safety protections Code: W 77 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 6: Year: 2002 Condition: As Is Used Blow Moulding Machine Sidel Sbo 6 Year: 2002 Speed: 10.000 bph Number of cavities: 6 Chiller not included Compressor not included Preform unscrambler Preform elevator Preform tipper Safety protections Code: W 89 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sfr 16: Year: 2001 Condition: As Is Used Blow Moulding Machine Sipa Sfr 16 : Year: 2001 Model: sfr 16 Speed: 18.000 bph on 1.5 lt 22.000 bph on 0.5 lt Number of cavities: 16 Preform elevator Preform orientator Safety protections Code: W 79 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Condition: As Is Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Speed: 4.000 bph Model: sf-08004 Number of cavities: 4 Type: linear Preform tipper Preform hopper Bottle formats: 1.5 lt Safety protections Code: W 86 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Condition: As Is Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Speed: 7.200 bph sul 1.5 l Model: sbo 6/10 serie 1 Number of cavities: 6 Bottle neck format 29/25 mm Preform elevator/orientator Stamp not included Worked hours: 47.000 Safety protections Code: W 84 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa sf 8/4: Year: 1998 Condition: As Is Used Blow Moulding Machine Sipa sf 8/4: Year: 1998. Speed: 4.000 bph. Model: sf 8/4. 4 cavities. Format available: 0.5 lt ? 1.5 lt ? 2.0 lt. Preform loader. Preform tipper. Complete with air recovery system. Safety protections. Code: W 14 More details: https://bottlingscout.com

Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 122 More details: https://bottlingscout.com

Used Used Kosme PET Blow Moulding Machine: Year: 2005 Condition: As Is Model: KSB4L Year: 2005 Speed: 6,000 BPH 1L format Type: linear 4 cavities Preform elevator and orientator Bottle neck 29/21 Safety protection Code: W 124 More details: https://bottlingscout.com

Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 123 More details: https://bottlingscout.com

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Description Belt moulder for rye bread used good working condition

Moulds

Description CHOCOLATE BISCUIT MOULDING LINE Manufactured by CARLE MONTANARI Model Multicavemill 1200 Mould dimensions 1110mm x 285mm. Approximately 1200 moulds on the chain. year 1993 including biscuit infeed conveyor with incline and overhead distribution incorporating 180deg turns Demoulding Station, twist action Mould Change System with product detection Mould Conditioning prior to deposit Model MLR 1200 Chocolate Depositor Shaker/Vibrator Biscuit Depositor / Placing System and Presser Backing Off System and Shaker/vibrator Cooling Chamber The line has a REISDORF ASM-1200 Wide Target Sprinkler for sprinkling ingredients on products Allen Bradley Controls 415volt 3phase 50hz Includes 2 x AASTED AMT-2000 Chocolate Tempering Machines, both from Year 1993, and access platform/gantry Line length 35.2m x 4m high at maximum (depositor section) No moulds are included.

Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: As Is Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com

Description Item # 9286 - CHOCOLATE SHELL MOULDING LINE used for filled pralines, eggs, balls, etc Manufactured by BINDLER Model HA/M - 275 year 1994 mould size 275mm x 220mm x 30mm design speed 5 moulds per minute upgraded to 7 per minute +/- single forms 162 moulds double forms halves 238 moulds working height 900mm total length 20m x width 3.1m 1 operator to run the line still installed and in excellent working condition, last run in 2024 process: - one magazine for empty mould removal - one magazine for empty mould loading - 1st mould heater pre-deposit - shell depositor model GKC - GWK Teco CS 140e water heater fitted for fast and continuous hopper and depositor plate heating/ pre-heating - mould turn over device with automatic chocolate recovery hopper - water heater fitted - and recirculation pump (to connect to either temperer or holding tank, not included) - mould vibration - 1s ...

Description Item # 9308 - ONE SHOT CHOCOLATE MOULDING LINE Manufactured by WESTAL 600mms wide Line Year of Manufacture not known (approximately 35 years old) Still set up in the factory, in full working order Up to 500Kgs per hour (around 4000Kgs per 8 hour shift), depending on product Line holds 420 moulds capacity up to about 25 moulds per minute, depending on product Including One Shot Depositor which was only being used for solid bars Could also include some types of inclusions Line with : Mould Warmer, automatic rising up from line when not being used One Shot Depositing head, last being used for solid bars Mould Vibration Mould Cooling, snake style through line Cooling by cold air, cooling fan included, cooling compressor also available if required (on outside of building) Mould Turnover & Mould De-Moulding, with hammer Product Exit Mould Return to start of line Line has had a New  ...

Description Item # 9326 - ONE SHOT CHOCOLATE MOULDING LINE Suitable for Solid, Filled, One Shot & Book Moulded Products Line includes: MESIMERIS METAL CONSTRUCTIONS (Greece) Universal Refiner/Conche, 1500Kgs, Year 2004, LLOVERAS AAC-502 Chocolate Tempering Machine, Year 1998, 500Kgs, with Pump. Motor Screw Shell overhaul in 2022. 300Kgs Stainless Steel Buffer Tank, Double Jacketted with water. AWEMA UDM222 One Shot Depositor, Year 2007, around 10 moulds per minute, up to 1600Kgs per 8 hour shift. Line is all year 2004, and includes: Preheating mould section(A1) with plastic belt, Tower control unit. Pusher for the 90 degrees angle, 5 meters long belt that drives near the head. Here can be added decoration robots (not available) or other equipment. Pusher that brings 2 by 2 the moulds and places to the belt of head. The head of the machine with the control panel (touchscreen or mouse cont ...

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Belt moulder for rye bread used good working condition

NNP Rotary moulder Stainless, belt dimensions 2250mm x 650mm, 650mm rotary moulder, previously used for pizza bases, with top mounted oil spray nozzle

Bread maker and rolling pin maker Dimensions: 88x88x120 Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

1 x Used ILLIG RDM70K PP-Mold for 8-Cavity, Rectangular Containers 145.5 x 65.3 x 41 mm age December 2007. Product drawing is attached.

Key data: 600 t

Max Tool length: 3000mm Max Tool Width: 2000mm Min Tool Height: 500mm Total Tool Weight: 20,000kg Max Closing Speed: 400 mm/sec

200ton Downstroke Moulding Press Manuf.: R+S Technik Platens: 1500 mm deep x 2000 mm wide Daylight 1000 mm Press force 2000kN Tearing force 120kN Operating voltage 3x230/400V, AC, 50Hz Installed power 197kW Max. weight of tool 5000kg Max. pressure of hydraulic 250bar Length of stroke 1670mm Weight: 37000kg Year 2016

1 x Used ILLIG RDM70K PP-Mold, 5-Cavites, Strawberry Containers 174 x 103 x 90 mm, age December 2005. Product drawing is attached.

Mould & Matic PET Round Lid Mold, to fit Ø95mm dia. Cups, 10-Cavity, age Dec. 2009, with Stacker Parts. Manufactured for the Gabler D600

This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.

for the production of pillow candies Power 10 - 250 kg/h, depending on type and size of the candies

CAP.: 10 000 BTLS/H OF 1.5 L,

Four nearly new moulds for garden wall and fence.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

KALMEIJER Pastry moulding rolls (standard A,B + C rolls)for KGM Christmas motifs used, good condition, different motifs: Spekulatius sorted German males Skat Nikolaus with fir tree (special roller)

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg