128,858 used machines on RESALE, but how to find them? Machine Search
STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...
1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz
RICO HGR 310 hydraulic guillotine shears were built in 2013 in Portugal by Rico Tomás Castro Silva, LDA. The machine, designed for machining of sheet metal with a maximum length of 3050 mm, offers high reliability, efficiency and precision. The machining process is performed by means of high-quality cutting knives with the ability to adjust the cutting angle according to the thickness of the material. Constant press force and balance during cutting are ensured in turn by synchronised movement of the cylinders with the flow of hydraulic fluid from one cylinder to another. All this is complemented by a fully welded design, which has undergone a number of technological operations to minimise deformation and ensure maximum durability. The HGR 310 guillotine shears weighs 8700 kg. Technical specifications of the RICO HGR 310 guillotine shears - NC control - maximum workpiece thickness ( ...
Key data: 1550 mm, 3 mm
Machine Type: Guillotine Shears Manufacturer: KRAMER Type: TM1a Year of Make: 1987 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-KRA-1025-1 DESCRIPTION We offer you a used guillotine shears from the manufacturer Kramer. Expected to be available from 10/07/2025 Cutting width max. 1550mm Cutting capacity max. 3.25mm Back gauge 550mm Weight 2065kg Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
Specifications: - working width 3100 mm - max. cutting capacity St 40 8 mm - Engine backgauge 10 - 750 mm - front angle stop - Stroke rate up to 30 per min - Drive 400 V / 2 x 6.5 kW - Space requirement incl. backgauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - Weight approx. 11000 kg
Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
QC11K 18×6000 hydraulic guillotine shears were built in 2018. This highly efficient machine is designed for precision cutting of sheet metal made from e.g. steel, non-ferrous metals, as well as selected plastics. Workpieces with a maximum thickness of 18 mm are machined by means of high-quality cutting knives with four cutting edges. All process parameters, on the other hand, are programmed on the intelligent DELEM CNC control with an intuitive interface and many useful functions. The QC11K 18×6000 guillotine shears weighs 40000 kg. Technical specifications of the QC11K 18×6000 guillotine shears - maximum cutting length: 6000 mm - maximum sheet metal thickness (Rm=420 N/mm2): 18 mm - maximum sheet metal thickness (Rm=700 N/mm2): 12 mm - work table height: 900 mm - back stop stroke: 1000 mm - adjustable gap between blades and cutting angle - motor power: 21 kW - power supply ...
1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)
Hydraulic. guillotine shears, used, ready for demonstration hydraulic plate shearer, used , ready for operation Typ / type: 252.6000.4 Fabr./ make: Helmut Lotze Baujahr/ year: 1995 Lager-Nummer / Stock number: 0989 Blechstärke bei größte Blechbreite/ thickness at max. cutting length: 4 mm Schneidbreite/ cutting length: 6040 mm Weight: approx. 22 t Specification: Hinteranschlag / backstop Rollablage / Roller tray
Key data: 3100 mm, 6 mm
Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg
used
Working length: 1020 mm Sheet power max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm
BAYKAL RGS 3150x3 electromechanical guillotine shears were built in 2007 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, distinguished by its high precision, is used for cutting of sheet metal with a maximum thickness of 3 mm. The machining process is performed by means of quality cutting knives with an adjustable gap between blades. The all-steel design, combined with a powerful electromechanical system, guarantees the highest cutting performance during even the most intensive challenges. The workspace is additionally protected by high-end light curtains made by FIESSLER ELEKTRONIK. All this makes the offered BAYKAL RGS guillotine shears an excellent choice for any industrial plant. Technical specifications of the BAYKAL RGS 3150x3 guillotine shears - maximum sheet metal thickness (Rm
Key data: 630 mm
Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg
BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...
D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph
Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg
MVD B06-3100 hydraulic guillotine shears were built in 2014 in Turkey by MVD Inan Machine Tool Industry Co. The machine is used for precision cutting of sheet metal with a maximum thickness of 6 mm. The machining process is performed by means of high-quality cutting knives, set at an angle of 1.5°. Positioning of the material is facilitated by a work table with integrated balls, on which the workpiece goes directly under the cutting line. All this is complemented by a robust design with a reliable 10 kW main motor. The MVD B 06-3100 guillotine shears weigh approximately 6000 kg. Technical specifications of the MVD B06-3100 guillotine shears - maximum sheet metal length: 3100 mm - maximum sheet metal thickness: 6 mm - number of strokes (automatic mode): 30/min - number of strokes (manual mode): 18/min - cutting angle: 1,5° - minimum distance of light curtain from knife: 2030 mm ...
Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg
Key data: 3100 mm, 3 mm
- CNC control and electric 3x 400V, 50/60 Hz - CNC backgauge 5 – 750 mm - Machine frame with knife bar - Hold-down device with plastic coating - Sheet metal hold-up system - Cutting sorting system to the front and rear - Foot lever for adjusting the cutting material diverter - Built-in special knives (suitable for stainless steel) - Cutting gap quick adjustment - Cut line lighting with LED - Standard table trays - Front clippings collector - Safety device - (Protective fence right and left, light barrier) Working length: 3100 mm Sheet thickness steel: 3.00 mm Color: white / grey / yellow Dimensions: 3920 x 2370 mm with hold-down device Throat: 5-750 mm Speed: 26 strokes/min with angle stop Cutting angle of/up to :1000 mm Cutting angle: 1.1 degrees Min. back gauge: 5 mm Max. back gauge: 750 mm
Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg
Key data: 3000 mm, 3 mm
with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 4040 mm, 2 mm
Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm
Offer 24206 Specifications: - Max. working width 2030 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Backgauge - Space requirement approx. W 2250 x H 1050 x D 750 mm - Weight approx. 700 kg
YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz
Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg
used
Key data: 2040 mm, 3 mm
Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg
Schneidmaschine - Guillotine Schneider Senator Senator 115H Year 2003 - Serial-No. M-115H-013-04/10-03 Schnittbreite max. 1150mm / Cutting width max. 1150mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Offer 24454 Specifications: - Max. cutting width 2520 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - Projection 200 mm - Stroke rate up to 30 /min - Front angle stop 1100 mm - Front support arm 400 mm -Mot. Back gauge 5 - 600 mm - Cut line illumination - Sheet metal hold-up - E – footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t
Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schneidmaschine - Guillotine Wohlenberg 76 SPM Serial-No. 3212-011 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives In einem guten Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schneidmaschine - Guillotine Polar 76 EM Year 1990 - Serial-No. 6061999 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch / Air Bed Lufttisch - Chromtisch / Light guard - chrome table Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schneidmaschine / Guillotine Serial-No. 1272 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schneidmaschine - Guillotine Polar 115 E Year 2000 - Serial-No. 7031278 Schnittbreite / Cutting width max. 1150mm Einlegetiefe / Feed depth max. 1150mm Einlagehöhe / Clamp opening max. 165mm Programm - Display Lichtschranke / Light guard Lufttisch - Chromtisch / Air Bed - chrome table Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schneidmaschine / Guillotine Polar 115 ED-AT Year 1996 - Serial-No. 6631040 Schnittbreite / Cutting width max. 1150mm Autotrim Lufttisch / Air Bed table Chromtisch / Chrome table Lichtschranke / Light guard Ersatzmesser / Spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Cutting machine DSN 700 from the manufacturer DÖINGHAUS Voltage: 3 x 400 V, 50 Hz Power: 2 kW Machine dimensions (LxWxH): 160 x 140 x 170 cm Weight: 550 kg Condition: well-kept, in working order Availability: as of now
Rüttler - Jogger Schneider Senator BR 115 Size 900 x 1150mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Ersatzmesser für Schneidmaschinen - Spare Knife for Guillotines Polar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg
Manufacturer: Fatosa Type: TBG 480 Year of Make: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum block size: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: Length 1350 x Width 700 x Height 1750 cm With raised front cover - height 2117 mm The guillotine is only equipped with a cross-cutting blade. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60
sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...
Key data: 2040 mm, 3 mm
Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 2300 kg
Key data: 1250 mm, 13 mm
1250 x 13mm Hydraulic shear
Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...
Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,
Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973
Manufacturer: Fleck Söhne, Type: DG 46, Year: 2007, Cutting lenght mm: 4600, Year :2007
maximum number of results exceeded
please refine your search
110 € 
