126,705 used machines on RESALE, but how to find them? Machine Search
Height=0.76 m, Overall length= 0.625 m, Overall width= 0.585 m, Net weight= 45 kg,
Height=2.08 m, Overall length= 0.84 m, Overall width= 4.74 m, Net weight= 900 kg,
Height=1.48 m, Overall length= 1.31 m, Overall width= 2.38 m, Net weight= 875 kg,
Height=1.835 m, Overall length= 0.8 m, Overall width= 2.32 m, Net weight= 480 kg,
Height=0.77 m, Overall length= 0.8 m, Overall width= 1.1 m, Net weight= 115 kg,
Height=0.38 m, Overall length= 0.6 m, Overall width= 0.75 m, Net weight= 44 kg,
Height=1.6 m, Overall length= 1.5 m, Overall width= 2.6 m, Net weight= 1275 kg,
Height=1.48 m, Overall length= 0.95 m, Overall width= 2.2 m, Net weight= 775 kg,
Height=2.13 m, Overall length= 0.98 m, Overall width= 4.05 m, Net weight= 820 kg,
Height=1.5 m, Overall length= 1.9 m, Overall width= 1.5 m, Net weight= 650 kg,
Height=1.5 m, Overall length= 1.97 m, Overall width= 1.2 m, Net weight= 730 kg,
Height=1.85 m, Overall length= 1.31 m, Overall width= 4.56 m, Net weight= 1295 kg,
Height=1.5 m, Overall length= 1.97 m, Overall width= 1.2 m, Net weight= 720 kg,
Height=1.11 m, Overall length= 0.71 m, Overall width= 1.05 m, Net weight= 280 kg,
Height=1.85 m, Overall length= 1.08 m, Overall width= 2.05 m, Net weight= 1500 kg,
Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,
Working width 130 cm, Diameter of mother reel 120 cm, machine in running
Key data: 630 mm, 8
A used gear pusher Lorenz S8/630 with interchangeable wheels.
Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 287 kg,
Key data: 630 mm, 8
Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800
weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...
weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...
weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad Total weight, approx.: 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) ...
Height=1.55 m, Overall length= 1 m, Overall width= 3.2 m, Net weight= 450 kg,
Height=1.59 m, Overall length= 2.18 m, Overall width= 1.21 m, Net weight= 915 kg,
WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition
Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 525 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,25 Überschieber Con ...
Spindle and jacket for extruder. - Brand: COVEX - 90 diam. x 2300 - 25 L/D Spindle length with resistors
Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., Rewinding with two pneumatically expandable rewind shafts for cores with ø75 mm and slots., Note: All information according to manufacturers description; no guarantee
Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display
Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm
Height=0.913 m, Overall length= 0.818 m, Overall width= 1.709 m, Net weight= 2 kg,
Height=1.22 m, Overall length= 0.57 m, Overall width= 1.03 m, Net weight= 155 kg,
Height=0.9 m, Overall length= 0.85 m, Overall width= 1.68 m, Net weight= 4 kg,
Height=1.19 m, Overall length= 1.27 m, Overall width= 2.38 m, Net weight= 600 kg,
Height=1.09 m, Overall length= 0.72 m, Overall width= 0.91 m, Net weight= 2 kg,
Type: SL Serial number: 018 Year of construction: 2004 Capacity: max 200 strokes/min Cutting thickness: max 20 mm Belt width: 565 mm Outfeed height: 970 mm Compressed air: 4 Bar Power: 3 x 400V, 50Hz, 4kW Dimensions: 1200 x 1700 x 2000 mm Weight: 750 kg Including cart with several product holders
Key data: 165 mm, 330 mm, 2800 U/min
WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!
Sliding table saw ALTENDORF F45 -used-double trolley, swivelling, rip fence with fine adjustment, boom table, table extension anodised aluminium, table extension anodised aluminium, angle mitre stop, upper protective cover narrow and wide---------- Technical data ----------swivel range: 45 Â, carriage length: 2,500 mm, cutting width: 800 mm, max. saw blade Ã: 450 mm, motor power: 5.5 kW, extraction nozzle Ã: 80 / 120 mm
Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm
Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)
Manufacturer: Haarsleev Model: Disc Dryer Year of Manufacture: 2019/2020 Decommissioned : December 2024 Drying capacity of up to 50,000 tons of sludge Find more here - / Contact us at -
From a current recycling we offer you a Holmer implement carrier + slurry technology + beet bunker Terra Variant 585 plus attachments. Year of manufacture: Holmer implement carrier + Zunhammer slurry technology 2019, beet basket 2024 First registration: / Condition: used Hours: approx. 8,459 Asking price: 295.000,00 Euro VHB Original price: 425.000,00 Euro Equipment / accessories / other information: Property will be converted to slurry at short notice Terra Variant 585 (BJ 2019), Slurry technology Zunhammer 21 m³ & Vogesang (BJ 2019), Overload bunker RB 35 (BJ 2024) Asset Manager: Klaudius Giolbas Phone: 0202 257273151 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 24983 Handewitt The sale is without warranty Subject to prior sale
Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm
Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm
DOMA-T Cheese Slicer KT 3 BOX Knife for 4 parts Machine for wheels with a diameter of up to 42cm Loaves are pushed upwards by the knife and pieces can then be easily removed from the machine surface Two-handed operation Machine must be thoroughly cleaned before use Video about test run available
Model: Conslit 17 Year of construction 2002 Web width: from 500 to 1750mm 2x web side guides / 2 side edge controls Friction and air shafts: 70, 76, 152 mm
Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.
maximum number of results exceeded
please refine your search
