molding machines used for sale

Key data: 600 , 131 , 35

Injection molding machine SANDRETTO Serie 8 - 60 T Reference : 192 / 60 Screw diameter : 35 mm Injection volume : 131 cm3 Injection pressure : 1450 bars L/D ratio : 21 Distance between tie bars : 325 x 325 mm Platen dimension : 500 x 500 mm Robot interface Dimensions: 5.17 m x 1.17 m x 1.98 m (top) Weight: 4,100 kg

Key data: 4850 , 1768 , 80

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air blow gun 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m

Key data: 12000 , 155

SANDRETTO MEGA T 1200

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

FCS SD-600 M injection moulding machine was built in 2009 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine, distinguished by its high efficiency and reliability, is an excellent choice for the economic production of plastic parts. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees the high repeatability and quality of the parts produced. In order to fully automate the entire process, a robot works together with the machine. It collects the finished moulded parts from the workspace onto a conveyor belt at the end of the process. The FCS SD 600 M injection moulding machine weighs 24 tonnes. Technical specifications of the FCS SD-600 M injection moulding machine  ...

FCS SD-600MSV injection moulding machine was built in 2015 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine is designed for the economic production of plastic parts of various shapes, sizes and colours. These parts are produced by a reliable injection moulding method. It involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees high repeatability and quality of the parts produced. The offer also includes equipment, consisting of, among others, an APEX robot and a conveyor belt. The FCS SD 600 MSV injection moulding machine weighs 40 tonnes. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 95 mm - injection  ...

FCS SD-600MSV injection moulding machine was built in 2016 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 110 mm - injection volume: 4274 cm3 - maximum injection weight PS: 3890 g - maximum injection pressure: 1307 kgf/cm2 - injection rate: 899 cm3/s - injection speed: 95 mm/s - injection stroke: 450 mm - minimum mould dimensions: 560 x 560 mm - mould thickness: 300-1100 mm - mould mounting platen dimensions: 1290 x 1290 mm - distance between tie-bars: 860 x 860 mm - ejector stroke: 220 mm - ejector force: 11 t - robot: SHINI ST1 - conveyor belt - cooling device (chiller): RIOU RO-30A - temperature controller in the range 0-400°C (8 pcs.) - heating power: 47.2 kW - pump po ...

Presse à injecter DEMAG ERGOTECH 110 T Type : 110/470-430 Année: 2003 Force de fermeture : 110 T / 1100 KN Diamètre vis : 40 mm Volume injectable : 231 cm3 Pression d’injection : 2200 bars Entre colonnes : 470 x 470 mm Dimensions des plateaux : 620 x 670 mm Épaisseur moule min: 200 mm Course d'ouverture: 600 mm Poids : 5600 kg Dimensions : 4,70 x 2,00 x 1,50 m

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

B&A REF: 9253 TON: 55 SCREW DIAMETER: 32MM SHOT WEIGHT: 92.3 STROKE VOLUME: 96.5CM3 INJECTION PRESSURE: 2127AR PLATEN SIZES: 565 X 540MM DBTB: 360 X 335 MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW

Key data: 5000 , 2050 , 80

Presse à injecter SANDRETTO 500 T Serie 7 Type : 3270/500 Force de fermeture : 500 T Diamètre vis : 80 mm Volume théorique d'injection: 2110 cm3 Poids de l’injection en PS : 2050 gr Longueur utile de la vis L/D : 20 Capacité de plastification : 290 kg/h Zone de chauffe : 4 Puissance total de chauffage : 31 KW Epaisseur moule min/max : 250-800 mm Course plateau mobile : 830 mm Passage entre les colonnes : 720 x 720 mm Capacité réservoir d’huile : 500 L Dimensions : 9,0 x 1,80 x 2,50 m Poids total : 25 000 KG

Presse à injecter NEGRI BOSSI 800 T Vector type 8000H-8400 Année : 2018 Nombres d’heures. : 25 000 heures? Commande : TACTUS? Force de verrouillage : 800 T? Diamètre vis : 110 mm? Volume injectable : 5160 cm3 Poids en PS : 4720 gr? Pression d’injection : 2020 bars? Dimensions des plateaux : 1670 x 1580 mm? Distance entre colonnes : 1100 x 950 mm? Epaisseur moule max : 1200 mm? Moteur de dosage électrique? 2 noyaux hydrauliques 4 soufflettes? Interface robot?

Key data: 40000 , 8100 , 130

KRAUSS MAFFEI KM4000 - 19000 MC Clamping force: 4000 T / 40000 KN Year : 1998 Screw diameter : 130 mm Injectable volume : 8100 gr Distance between tie bar : 2240 x 1800 mm Platen dimensions : 3340 x 2940 mm Min / max mold thickness: 1100 / 2000 mm Opening stroke: 4200 mm Stroke of the ejection unit : 350 mm Weight : 255 T   + KUKA robot

Presse à injecter SANDRETTO Micro 30T E SANDRETTO micro 30T E247 Version 2 GEFRAN Interface robot Euromap 12 Boite à eau 4 voies Tableau de prises

On behalf of our client, we are selling this KHS Blomax 16 PET blow molding machine which is designed for the automated production of PET bottles. It ran together with 2x KHS Absofill / ABF 710 machines before (one of these 2 also sold by our , .hamburg-machinery/listings/7469327-used-aseptic-pet-bottle-filling-ma chine-khs-innosept-absofill-abf-710-03). It is dismantled ± 8 years ago and is stored since in a closed warehouse. The client bought the machine used and decided not to blow bottles themselve, but buy them from another supplier, already blown. This bottle blower is direct available. Loading on the truck / inside the container will be done by the dairy factory., The machine was used to blow PET bottle for a fruit juice factory in Germany. Capacity: 28.800 bottles/h. Bottle size: min. 200 ml and max. 2.000 ml. Current bottle neck nominal diameter: 38 mm. With the same nominal bo ...

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Key data: 1200 kN, 186 g/PS, 35 mm

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machiner ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 22AVV injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ad ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

DEMAG Sumitomo SYSTEC 210-840 Clamping Force: 210 T / 2100 kN Year: 2009 Screw Diameter: 50 mm Injection Volume: 442 cm³ Polystyrene Mold Weight: 402 g L/D Ratio: 20 Injection Pressure: 1946 bar Distance Between Tie bar: 580 x 580 mm Platen Dimensions: 860 x 860 mm Mold Thickness Min / Max: 340 / 690 mm Opening Stroke: 575 mm Weight: 9.6 T Dimensions: 6.0 x 1.70 x 2.0 m

SANDRETTO serie 7 160/40 Force de fermeture : 40 T / 400 KN Diamètre vis : 28 mm Volume injectable : 80 cm3 Poids de la moulée en PS : 77 gr Rapoirt L/D : 23 Pression d’injection : 1970 bars Distance entre colonnes : 266 x 266 mm Epaisseur moule Min / max : 100 / 350 mm Course d'ouverture : 270 mm Poids : 2300 KG

Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998

Key data: 350 , 53 , 28

BOY 35 E injection molding machine Type : 350-92 35E?Year: 2014?Screw diameter : 28 mm?Injection pressure: 1639 bars?Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr?Clamping Force: 35 T?Distance between tie bar bar: 280 x 254 mm?Mould installation height min : 200 mm?Plate distance max : 500 mm?Dimensions: 2400 x 820 x 1950 mm?Weight: 1195 kg

1 of used blow-moulder, make Krones, type Contiform S12, new 2006. With generic moulds for 2.0, 2.5 and 3.0 liter PET bottles with 1881 neck finish. Capacity 18.000 bph on 2.0 liter. With pre-form feeder and Gardner Denver Belliss Morcom high-pressure compressor type WH29H3N with air dryer and receiver. Operating hours approx. 40.000. In operation through August 2026. Also available from the same line: pneumatic conveyors, Krones rinser/filler/capper tribloc, Ocme Vega film-only shrinkwrapper, interconnecting bottle and pack conveyors.

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

Key data: 6500 kN, 80 mm

Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 1750 kN, 393 g/PS, 50 mm

Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4

Souffleuse KAUTEX H10-3 S80 2D/3D Diamètre vis : 140 mm ?Machine retrofitée en 2005

Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine no. 8 Clamping force: 1000 kN EUROMAP: 1000-675. Operating hours in automatic mode: 32,312 h. Machine cycles: 3,192,800. Hydraulic pump operating hours: 42,753 h. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. P ump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x 2140 mm (height). Weight: 5400 kg.

Key data: 500 kN

ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN EUROMAP: 500-250. Operating hours in automatic mode: 38,560 h. Hydraulic pump operating hours: 48,759 h. Cycles: 6,502,482. Spindle diameter: 40 mm. Distance between columns: 320 x 320 mm. Platen dimensions: 446 x 446 mm. Injection unit (EUROMAP): 250. Approximate injection volume: 106 m³. Injection weight (PS): 97 g. Operating voltage: 400 V – 3 – 50 Hz. Heating: 6.5 kW. Pump motor: 1 x 15.00 kW. Total power: 21.5 kW. Weight: 2,330 kg.

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9302 TON: 270 SCREW DIAMETER:  55MM SHOT WEIGHT: 594 STROKE VOLUME:  653CM3 INJECTION PRESSURE:  2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE:  600MM MAX DAYLIGHT:  1250MM EJECTOR STROKE:  200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY:  18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Key data: 3500 kN, 519 g/PS, 55 mm

1.0 pcs. Injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM350-2000CX Year of Make: 2008 Clamping force: 300 tons Spar spacing 710 x 7100 mm Screws DN: 55 mm Max. displacement: 570 cm³ Moulded part weight: 519 g/hp Control: MC5 Equipment: 2 pcs core train Robot Manufacturer: SEPRO 45-fold hot zone channel control Interface temperature control unit Approx. 67,530 operating hours

Key data: 468 kN, 2043 g/PS, 83 mm

- Top condition - Used for only one tool, no conversions - 2 Core moves - 8-way hot runner regulator - Nitrided high-strength screw -

Key data: 600 kN, 35 mm

SANDRETTO Serie 8 192/60 - 60 T Reference: 192/60 Screw Diameter: 35 mm Injection Volume: 131 cm³ Injection Pressure: 1450 bar L/D Ratio: 21 Distance Between tie bar: 325 x 325 mm Platen Dimensions: 500 x 500 mm Interface Robot Dimensions: 5.17 m x 1.17 m x 1.98 m Weight: 4100 kg

SANDRETTO Series 8 430/110 Clamping Force: 110 T Year : 1998 Distance Between tie bar: 415 x 415 mm Platen Dimensions: 610 x 610 mm Mold Thickness (min/max): 100 - 460 mm Opening Stroke: 410 mm Injection Volume: 353 cm³ Injection Pressure: 1215 bar Screw Diameter: 50 mm Weight: 5700 kg Dimensions: 5.67 x 2.03 x 1.32 m SEF 100

Key data: 3000 kN

SANDRETTO SERIE 9 - 300 T Year : 2005

Key data: 2300 kN, 50 mm

SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000

Key data: 4850 kN, 80 mm

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg