molding machines used for sale

1) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 2000/250 RS SX-F - Stations: 1 - Clamping Force: 500 Ton - Heating Platens Dimensions: 520x650 mm - Max Shot Volume: 2000 cc - Max Daylight: 450 mm - Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Vol ...

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Used labeling machine, sleeve applicator with a shrink tunnel made by Clever Machines, model GS 321. New in 2005.

Jeros 6015 TRAY CLEANING MACHINES

2 x in stock

set of machines to manually produce hard covers etc. set consists of: - Record 54 - gluer, warm and cold glue, working width 54 cm - Rimbo 110 - double turning in station, working width 110 cm - Ottima 74 - nip roller press, working width 74 cm - Schmedt Prädeck - board positioning table, 60x40cm (extension possible)

Offered as a package deal: GS-24 PLUS 200 and GS-24 PLUS SPM machines included. Machine 1 (Has two individual sealing units arranged one behind the other) Model: GPPL-GS-24-Plus-200 Year of Manufacture: 2020 The machine set is capable of producing various pouch types, including: - Three Side Seal Pouches (with/without zipper) - Stand-up Pouches (with/without zipper) - Both Side Gusset Pouches - Shape Pouches (via attachment) - Bottom Film Synchronization & Laminate Roll Conversions Applicable Films - Heat-sealable laminated films: - PET poly, PET MET poly, PET ALU foil poly, paper poly, multi-layer films (e.g., PA/PE) Production Range - Output: Up to 200 shots/min or 35 meters/min - Actual output depends on pouch size, repeat length, and laminate type Product Size Range - Three Side Seal Pouch: - 100–600 mm (W) x 100–400 mm (L), 1–2 line operations - Stand-up Pouch: - Si ...

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

full line for mesh up to 6 m

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Four nearly new moulds for garden wall and fence.

We have 6 Hongyuan HY-6 texturizing machines for sale,V-type,manufacture year:2011,240 spindles,with airjets,unitens,pneumatic yarn feeders PU discs,godets drawing,same like Barmag EFK texturizing machine..still working now.Very good condition.Sirous buyers contactus,please. We have many brands, models, years texturing machines, tell me what you need seriously!

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Used SB Machines LZ1-CIP liquid filling line. New 2020. The line includes: 1. LZ1-CIP filling line – This machine is designed for the automatic filling of milk and other liquid products. For filling products with capacities of: 250 ml, 500 ml, 1 L 2. ECA-08 label applicator – for applying single labels to cylindrical containers such as bottles and plastic containers. The label applicator uses paper labels. Manufacturer: Świdnik Trade Year of manufacture: 2016 Power supply: 220/380V, 10A Capacity: 0 ± 6000 units/hour Container diameter: min. Ø 50mm; max. Ø 100mm 3. Automatic wrapping machine – The machine is designed to arrange bottles delivered by a conveyor into packs of 6 or 8 pieces (in two rows), then wrap them in heat-shrink film and move them to a shrink tunnel. Manufacturer: Drewmet s.c. Power supply: 400V, 50Hz Capacity: 0 ± 3000 pcs/h Package dia ...

USED MORTON FM-130-D 130 LITRES PADDLE BLENDER REF#: C5058 Morton mixer model FM-130 -D manufactured in 316L stainless steel with agitation type plow blades and a choper in the body. An inspection door with flange for product entry and inertization system or option of adding liquids with manual closures. On carbon steel bedplate and electric panel General characteristics: Manufactured by MORTON MACHINES CO Model FM-130-D Year built 1987 Technical characteristics: Capacity 130 L Shovels +

PreviousNext Tetra Pak TBA 9 125ml Filling Machines for sale Item #: Usm-174 Category Tetra Pak TBA 9 Two Tetra Pak TBA 9 125ml Filling Machines, Year of Manufacturing 1994 and version is 130v and 140v, Two Helix -Accumulators and Paper Trolly

We have two Marking Machines ( bar code ) available for sale Manufacturer : MAGNEMAG Year of Manufacture : 2011 Mechanical and electrical parts are from Magnemag - The writing / ink part of Videojet Romtrust Printers SA (currently Multitech Industrial SRL) Spare Parts for MAGNEMAG Marking Machine - ARTICULATION - Drawing No: 0.36.202.092 - Quantity: 1 - ARTICULATED ARM - Drawing No: 0.36.202.091 - Quantity: 1 - ARTICULATION SUPPORT - Drawing No: 0.36.202.090 - Quantity: 1 - SUPPORT 2 - Drawing No: 0.36.202.124 - Quantity: 2 - SUPPORT 1 - Drawing No: 0.36.202.121 - Quantity: 2 - CAMERA SUPPORT - Drawing No: 0.36.202.088 - Quantity: 1 - CONSOLE - Drawing No: 0.36.202.103 - Quantity: 1 - ARM - Drawing No: 0.36.202.101 - Quantity: 1 - FRAME - Drawing No: 0.36.202.085 - Quantity: 1 - LEG - Drawing No: 0.36.202.100 - Quantity: 1 Find more here - / Contact us at -

Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.

Size: 700 x 1000 mm Equipments: Width 160 cm Length 170 cm Maximum frame size 1125 x 1500 mm Maximum printing size 700 x 1000 mm Maximum sheet size 885 x 1250 mm Off-contact variable 3 - 28 Air consumption 6 bar, 20 nl/min Squeegee speed m/sec 0,2 - 1,2 Squeegee angle adjust 75 - 90º Electrical connection 230 V, 50 Hz, 1ph+N+Pe, 3 kW Fine register adjustm +20 / -20 Max. stock thickness 25 Machine weight 435 KG Max. nr of prints/hour 850 semiautomatic screen printing machines

Size: 600 mm Equipments: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

We are pleased to offer for sale a Siemens SIPLACE SMT Machine Package, composed of the following equipment: ( tray units / accesories included ) 1.SIPLACE F5 HM Year of Manufacture: 2004-2006 Weight: 2,320 kg Technical Specifications - Operating Pressure: 5.5 – 8 bar - Air Flow: 300 Nl/min - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 3.3 A - Power Consumption: 1.8 kW - Circuit Protection: 3 x 16 A breakers - Max Motor Current (Rated): 16 A 2.WPW/3-900 Year of Manufacture: 2006 Weight: 230 kg Technical Specifications - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 0.7 A - Power Consumption: 0.4 kW - Circuit Protection: 3 x 6 A circuit breakers - Max Motor Current (Rated): 6 A 3.SIPLACE 80 S-15 HM Year of Manufacture: 1999 ...

Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 450 mm Distance between tie bars: 560 x 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Opening width: 1050 mm Platen size (h x v): 790 x 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,10 x 1,90 x 2,10 m Machine weight: 8400 kg Robot Producer: Krauss Maffei Type: LRX-100 Year: 2012

Ref. no.: 18591 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, In store Made in Denmark Description Capacity of 800 – 1000 trays per hour 3 main brushes for cleaning made of polyamide 2 brushes for cleaning of perforated trays All brushes can be adjusted individually to prolong the lifespan Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes The whole machine can be cleaned with water External oil container with sight glass and circulation pump Mobil scrapings container

Extrusion line for drip irrigation

Used Used Case Packer Machines TMG: Year: 2018 Condition: Good Used Case Packer Machines TMG Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections Case packer tmg Box closing machine tmg Code: JM 91 More details: https://bottlingscout.com

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

Morton Machines double jacketed paddle mixer, type: FM-130-D, machine number: M23548, year of construction: 1987, volume: 130 liter, dimensions: 2100 mm x 1150 mm x 1600 mm.

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Engel injection moulding machine Type: It with 7000 / 900, Sanzgiri robot system. Control: CC 90 built: 1988 Clamping unit Clamping force t Gap between 900 mm: 1000 Min/max height mm: 400/1000 plates size: 1500 x 1500 Injection unit Screw diameter mm: 120 injection weight gr: 4886 Injection volume cm 3: 5429 spray pressure bar: 1320 Dimensions and weights Dimensions Lxwxh m: 13.2 x 2.7 x 2.9 machine weight kg: 47,000/20,000 Miscellaneous EUROMAP 12 Sanzgiri robot system.

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features