molding machines used for sale

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible.

Manufacturer: ENGEL Model: EM 440/150 Year of Manufacture: 2007 Specifications: - Clamping Force: 150 tons - Screw Diameter: 35 mm - Operating Hours: 58,724 Find more here - / Contact us at -

Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -

A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.

Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 200 ton

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Clamping Force: 220 ton // Shot Weight (Max): 625 g

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - / Contact us at -

Dimensions (L/W/H): 1250x880x850 mm Weight: 180 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kautex Model: KBS2-20/40-S90/22D Year of Manufacture: 1999 PLC control: Siemens S5 Grinder: Rapid 3545 Conveyor Material feeding system Piovan Dedusting system Piovan Automatic component gripper and scale Spare parts Control Voltage: - AC: 230 V - DC: 24 V Working Voltage (AC, 3-phase): - Drive I: 400 V - Drive II: 400 V - Heating: 400 V Frequency: 50 Hz Rated Current: - Drive I: 285 A - Heating: 70 A Maximum Fuse Rating: - Drive I: 315 A (time delay) - Heating: 100 A (fast acting) Find more here - / Contact us at -

Blowing machine SIPA type SFR EVO3 capacity: 18.000 bph - 0,5 ltr., 1,0 ltr., 1,5 ltr. year of manufacturing: 2017 neck type: PCO 28 - 1810 with 8 cavities incl. preform feeding system incl. preform cooling system Min. - Max. bottle diameter (diagonal): 50 - 125 mm Min. - Max. bottle height (without neck): 80 - 349 mm without high pressure compressor The machine is still in production until the beginning of February 2026.

Blowing machine SIG Corpoplast type Blomax 20 capacity: approx. 30.000 bph year of manufacturing: 2002 min. bottle volume: 200 ml max. bottle volume: 3.000 ml max. bottle diameter: 126 mm max. bottle length: 350 mm min. bottle length: 107 mm incl. preform tipper incl. preform feeding system neck size: PCO 28 incl. spare part package

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

Manufacturer: Engel Model: Victory 1050/200 Year of Manufacture: 2006 Machine type: Injection Molding Machine Operating hours: 107027 Closing force: 200 t Screw diameter: 55 mm Max. injection volume: 511 cm3 Fixing plate: 860 x 860 mm Machine weight: 12.9 t Find more here - / Contact us at -

Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -

Manufacturer: Arburg Model:720S 3200/1300 Year of Manufacture: 2010 Operating hours: 84854 Closing force: 320 t Screw diameter: 60 mm Max. injection volume: 664 cm3 Fixing plate: 1030 x 1030 mm Machine weight: 17.5 t Find more here - / Contact us at -

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -

Key data: 5500 mm, 1127 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1127 g Clamping force: 5500 kN Screw diameter: 70 mm Stroke volume: 1239 cm³ Injection weight in polystyrene: 1127 g/hp Injection pressure: 1,990 bar Clamping force: 550 t Lights Tie bar spacing H x V: 920 x 830 mm Tool installation height - min.: 350 mm Opening distance: 750/1300 mm Microprocessor control: KEBA 2880 Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kW Total connected load: 95.4 kW Total weight: 21,000 kg Total size: 7.5 x 2.5 x 2.6 m Payment terms: 100 % before taking over the machine, purely net

Manufacturer: Engel Model: e victory 50/50 Year of Manufacture: 2019 Operating Hours: 18,660 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 50 Material Injection Unit: Thermoplastics Screw Diameter: 18 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 450 x 500mm Closing Force: 50to Platen Spacing: 600 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 600 Kg

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - / Contact us at -

Manufacturer: Engel Model: e-motion 170/110 T Year of Manufacture: 2014 Total Running Hours: 6,317 Hours Condition: Very good technical condition Technical Details Drive: Fully Electric Year of Manufacture: 2014 Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 and 30mm Drive Injection Unit: Electric Construction: Mit Holme Clamping Plate: 680 x 730mm Closing Force: 110to Platen Spacing: 850 mm Drive: Electric Tool Weight Max: 1600 Kg Linear Roboter Viper Series: Viper 12 Year of Manufacture: 2014 Find more here - / Contact us at -

Manufacturer: KraussMaffei Model: 80-390 C1 Year of Manufacture: 2001 Electrical Specifications Operating Voltage: 3-Phase, 400 V Frequency: 50 Hz Total Rated Current: (In Total) 57 A Motor Current: (I Motor) 30 A Main: Fuse 80 A Find more here - / Contact us at -

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - / Contact us at -

Blow molding machine Kosme model: KSB 6R with 6 cavities year of manufacturing: 2017 neck size: PCO 1881 capacity: 12.000 bph container size: max. 3,0 ltr. including preform feeding system including chiller without blowing moulds already dismantled at the end of January 2026

Manufacturer: Sepro Model: Strong 40 LV Year of Manufacture: 2018 Machine Type : Injection Moulding Robot - Mounted on SGM in early 2019 - Production stopped in 202 - Not frequently used. Mechanical Specifications - Robot weight: 757 kg - Payload capacity: 20 kg - Overall dimensions (Y and Z retracted): 5385 x 2145 x 1910 mm - Pneumatic operating pressure: 6 bar +/- 10% - Maximum pneumatic pressure: 7 bar - Nominal air consumption: 180 l/min - Peak air consumption: 820 l/min Axis Strokes and Performance - X-axis (horizontal traverse): 4000 mm stroke, 2.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Y-axis (horizontal demould): 1100 mm stroke, 1.8 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Z-axis (vertical): 2000 mm stroke, 2.5 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - All axes: brushless servo moto ...

Manufacturer: Sepro Model: Success 33 Year of Manufacture: 2018 Machine Type : Injection Moulding Robot - Mounted on SGM in early 2019 - Production stopped in 2021 - Not frequently used Mechanical Specifications - Robot weight: 511 kg - Payload capacity: 15 kg - Overall dimensions (Y and Z retracted): 4010 x 1710 x 2520 mm - Pneumatic operating pressure: 6 bar +/- 10% - Maximum pneumatic pressure: 7 bar - Nominal air consumption: 140 l/min - Peak air consumption: 820 l/min Axis Strokes and Performance - X-axis (horizontal traverse): 3000 mm stroke, 1.7 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Y-axis (horizontal stripping): 900 mm stroke, 2.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Z-axis (vertical): 1600 mm stroke, 3.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - All axes: brushless servo motor ...

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - / Contact us at -

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - / Contact us at -

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -

A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible.

Praline forming machine, praline shaper, -Conveyor belt missing -Chocolate forming machine -Execution: stable -Conveyor belt width: 110 mm -2x press rollers: Ø 145 mm -1x molded body: with ejection -1x machine with shape ellipse: approx. 20 x 35 mm -Transport dimensions: 1540/520/H1420 mm -Weight: 280 kg

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

A molded part press Italpresse for the woodworking and furniture industry is available. Motor power: 160hp, Press force: approx. 160t, Cylinders: 2, Weight: approx. 17600kg. An on-site inspection is possible.