molding machines used for sale

Key data: 27000 kN, 190 mm

incl. Viper Robot 90

Presse à injecter NEGRI BOSSI 850T Vector type V850-6500 Année : 2007 Nombres d’heures : 44 000 heures Force de verrouillage : 850 T Diamètre vis : 100 mm Volume injectable : 3925 cm3 Pression d’injection : 1670 bars Dimensions des plateaux : 1670 x 1580 mm Distance entre colonnes : 1140 x 1020 mm Course d’ouverture : 1200 mm Epaisseur moule mini : 400 mm Moteur de dosage électrique Interface robot

B&A REF:  9228 TON: 320 SCREW DIAMETER:  70MM SHOT WEIGHT: 1266 STROKE VOLUME:  1346CM3 INJECTION PRESSURE:  1660AR PLATEN SIZES:  990 X 990MM DBTB: 680 X 680MM MIN MOULD HEIGHT:  260MM MAX MOULD HEIGHT: 680MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1330MM EJECTOR STROKE:  180MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES:  2 MOTOR: 45 HEATING CAPACITY: 18.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9330 TON: 1600 SCREW DIAMETER:  175MM SHOT WEIGHT: 16042 STROKE VOLUME:  17438CM3 INJECTION PRESSURE:  1843AR PLATEN SIZES:  2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT:  700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE:  2700MM MAX DAYLIGHT:  3400MM EJECTOR STROKE:  350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO  SCREW DRIVE:   ELECTRIC

B&A REF:   9320 TON: 610 SCREW DIAMETER:  90MM SHOT WEIGHT: 2576 STROKE VOLUME:  2831CM3 INJECTION PRESSURE: 1548AR PLATEN SIZES:  1270 X 1270MM DBTB: 850 X 850MM MIN MOULD HEIGHT:  300MM MAX MOULD HEIGHT: 1000MM MOULD OPENING STROKE:  930MM MAX DAYLIGHT:  1930MM EJECTOR STROKE:  350MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 38KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

B&A REF:  9271 TON: 800 SCREW DIAMETER:  110MM SHOT WEIGHT: 4720 STROKE VOLUME:  5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES:  1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT:  400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE:  1080MM MAX DAYLIGHT:  2180MM EJECTOR STROKE:  350MM CONTROLS: TACTUS  CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY: 37KW ROBOT: STYRAM S10-L SERVO SCREW DRIVE:  ELECTRIC

Key data: 8000 kN, 90 mm

ENGEL DUO 5550/800 – 800 T Year: 2006 Operating hours: 20,600 h Clamping force: 800 t Screw diameter: 90 mm Distance between tiebars: 1,170 × 1,000 mm Opening stroke: 1,600 mm Mold height (min./max.): 500 / 1,100 mm Injection volume: 2,740 cm³ Injection pressure: 2,180 bar Options: Bi-metallic screw 2 hydraulic core pulls Robot interface Overhaul performed by ENGEL New pump

BOY 35 E injection molding machine in good condition Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 Tons Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : a laminar flow and carrot peck

Injection moulding machine Demag 1000 to BJ 2019

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

various spare parts incl.

many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available

Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...

Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Key data: 6500 mm, 2013 , 80

Screw diameter: 80 mm Injection weight in polystyrene: 2013 g Clamping force: 6500 kN Screw diameter: 80 mm Stroke volume: 2212 cm³ Injection weight in polystyrene: 2013 g/hp Injection pressure: 2,090 bar Clamping force: 650 t Lights Tie-bar spacing H x V: 1040 x 910 mm Tool installation height - min.: 400 mm Opening distance: 500/1350 mm Microprocessor control: KEBA 2985- 15' tou screen Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / Without water battery: -/- Pump drive power: 65 kW Total connected load: 84 kW Total weight: 28,000 kg Total size: 7.7 x 2.6 x 2.7 m Payment terms: 100 % before taking over the machine, net only

Persico SMART LEO V2.8 Rotary Molding Machine (2022) The Persico SMART LEO V2.8 is a biaxial rotary molding machine for the production of high-volume hollow parts. It integrates the loading, heating, rotation, cooling and unloading steps in a single cycle. Temperature control is provided by sensors and software, ensuring consistent quality. Available in automatic or manual versions, this machine is ideal for the manufacture of tanks (gases, liquids), buoys, outdoor games or technical parts. Designed for high reliability, it can operate standalone or be integrated into a production line. Technical characteristics: • Manufacturer: Persico Engineering Division (Italy) • Model: SMART LEO V2.8 • Year: 2022 • Serial Number: 59416 SM • Power: 210–290 kW • Power supply: 400 V / 50 Hz / 3 Ph • Mould dimensions: 2800 × 1800 mm • Moulded weight: max. 1000 kg • Rot ...

- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

closing pressure:6600 kN weight of the machine ca.:45,5 t

screw size:60 mm closing pressure:3500 kN weight of the machine ca.:25,5 t

Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Used biscuit moulding machine with various shapes made by Elcal from Biała Rawska.

Pressing force max KN 600 Withdrawal force max KN 300 Die Supporting force max KN 300 Die return force max KN 32 Upper punch travel mm 190 Upper punch adj.travel mm 200 Filling height max mm 180 Pressing travel max. mm 90 Withdraw travel max. mm 95 Top pressing travel max mm 18 Adjustment at Die position mm 50 Filler travel mm 140 Maximum forming Diameter mm 130 Cycle stroke /min 12-25 Main Motor Power KW 15 Total Power KW 15 Speed control method Inverter Driving pressure for Clutch MPa 0.55 Pre-load Travel mm 110 Total air consumption L/min 300 Total weight Kg 5800 Overall size H mm 3200 W mm 1750 D mm 1480

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

Used machine in good condition. Available for immediate delivery.

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

Including YUSHIN 5 axis servo robot - 21.5 HD Touch screen display - 23 languages - selectable - 10 stages of injection pressure & speed control - 6 stages of closing & 5 stages of opening via speed & position control - auto acceleration control - 10 stages of ejector control, 2 stage ejector and 4 patterns of ejector motion control - Simultaneous Ejector forward with clamp opening - Simultaneous clamp open and plasticising - Screw diameter: 20 mm - Injection volume: 24 cm? - Platen size h: 500 mm - Platen size v: 470 mm - Distance between tie-bars (h x v): 360 x 320 mm - Ejector force: 5 / 20 (2.0tonf) / 70 kN - Power: installed max: 15.7 kW - Operating hours: 10.600 - Weight: 2.900 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 50 mm - Clamping force: 1.600 kN - Shot weight max: 297 g - Injection pressure: 2.080 bar - Injection volume: 353 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 225 / 66 mm / kN - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Daylight between platens max: 900 mm - Platen size (h x v): 685 x 685 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: n/a - Power: installed max: ? 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 5.000 x 1.615 x 2.110 mm

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Clamping force: 600 kN - Mould height max: 190 mm - Platen size (h x v): 910 x 400 mm - Control: CC220

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

with Robot WITTMANN W713-0114 - Screw diameter: 55 mm - Clamping force: 200 kN - Injection volume: 427 cm? - Mould opening stroke max: 650 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 520 x 520 mm - Operating hours: 24.453 - Power: installed max: 15 + 30 kW - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg - Weight: 6.630 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 97 g - Injection volume: 106 cm? - Clamping force: 500 kN - Daylight between platens max: 550 mm - Platen size (h x v): 446 x 446 mm - Distance between tie-bars (h x v): 320 x 320 mm - Power: installed max: 21,5 kW - Dimensions (long x wide x high): 3.410 x 1.475 x 1.990 mm - Weight: 2.330 kg

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -

Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -

A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 200 ton

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Clamping Force: 220 ton // Shot Weight (Max): 625 g